Linux Renesas SOC
[Prev Page][Next Page]
- Bounce probe for linux-renesas-soc@xxxxxxxxxxxxxxx (no action required)
- From: linux-renesas-soc+owner
- Re: (subset) [PATCH 0/3] phy: Remove redundant ternary operators
- Re: [PATCH] phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
- [PATCH v2 2/2] clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks
- [PATCH v2 1/2] dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet and GMAC clocks
- renesas-drivers-2025-08-26-v6.17-rc3
- RE: [PATCH 2/7] drm: writeback: Modify writeback init helpers
- Re: [PATCH 3/4] dt-bindings: clock: renesas,r9a09g047-cpg: Add GPT core clocks
- [PATCH v7 4/6] arm64: dts: renesas: r9a09g047: Add #address-cells property in sys node
- [PATCH v5 09/15] pinctrl: constify pinmux_generic_get_function()
- From: Bartosz Golaszewski
- [PATCH v5 02/15] pinctrl: ingenic: use struct pinfunction instead of struct function_desc
- From: Bartosz Golaszewski
- Re: [PATCH 2/4] clk: renesas: rzv2h: Add support for parent mod clocks
- [PATCH v5 12/15] pinctrl: allow to mark pin functions as requestable GPIOs
- From: Bartosz Golaszewski
- [PATCH 6/7] arm64: dts: renesas: r9a09g047: Add GPT nodes
- [PATCH v2 7/8] drm: writeback: drop excess connector initialization functions
- RE: [PATCH 2/2] pinctrl: renesas: rzg2l: Don't reconfigure the pin if it is same as reset values
- RE: [PATCH RFT] mmc: host: renesas_sdhi: Fix the actual clock
- [PATCH v5 10/15] pinctrl: make struct pinfunction a pointer in struct function_desc
- From: Bartosz Golaszewski
- [PATCH v2 8/8] drm: writeback: rename drm_writeback_connector_init_with_encoder()
- [PATCH v2 1/8] drm/amd/display: use drmm_writeback_connector_init()
- [PATCH v2 0/8] drm: writeback: clean up writeback connector initialization
- Re: [PATCH v2 5/8] drm/msm/dpu: use drmm_writeback_connector_init()
- [PATCH v2 6/8] drm/vc4: use drmm_writeback_connector_init()
- Re: [PATCH v6 06/15] pinctrl: imx: don't access the pin function radix tree directly
- Re: [PATCH 02/13] arm64: dts: renesas: r9a09g087: Add DT nodes for SCI channels 1-5
- Re: [PATCH net-next 10/10] net: pcs: rzn1-miic: Add PCS validate callback for RZ/T2H MIIC
- [geert-renesas-devel:renesas-dts-for-v6.18] BUILD SUCCESS 9471de64c9cc15a74e11eaa0c6156fe866ec11c3
- [geert-renesas-devel:next] BUILD SUCCESS eb33590872d1c32a76ef513ad7be58de29d9f921
- Re: [PATCH] net: pcs-rzn1-miic: Correct MODCTRL register offset
- Re: (subset) [PATCH 0/3] Add DMAC support to the RZ/G3E
- [PATCH v7 6/6] arm64: defconfig: Enable the Renesas RZ/G3E thermal driver
- [PATCH 1/7] dt-bindings: pwm: renesas,rzg2l-gpt: Document RZ/G3E support
- [PATCH v7 3/6] thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
- [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- From: Bartosz Golaszewski
- RE: [PATCH 110/114] clk: visconti: pll: convert from round_rate() to determine_rate()
- [PATCH v5 05/15] pinctrl: mediatek: moore: replace struct function_desc with struct pinfunction
- From: Bartosz Golaszewski
- Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure
- RE: [PATCH v7 2/6] clk: renesas: rzv2h-cpg: Add support for DSI clocks
- [PATCH v2 2/8] drm/komeda: use drmm_writeback_connector_init()
- RE: [PATCH v7 1/6] clk: renesas: rzv2h-cpg: Add instance field to struct pll
- RE: [PATCH v7 3/6] clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
- [PATCH v2 3/8] drm/mali: use drmm_writeback_connector_init()
- [PATCH v2 5/8] drm/msm/dpu: use drmm_writeback_connector_init()
- Re: [PATCH v2] checks: Remove check for graph child addresses
- [PATCH v5 06/15] pinctrl: imx: don't access the pin function radix tree directly
- From: Bartosz Golaszewski
- [PATCH v5 08/15] pinctrl: keembay: use a dedicated structure for the pinfunction description
- From: Bartosz Golaszewski
- Re: [PATCH 058/114] clk: stm32: stm32-core: convert from round_rate() to determine_rate()
- Re: [PATCH v2 4/8] drm/msm/dpu: use drmm_writeback_connector_init()
- [geert-renesas-devel:topic/renesas-defconfig] BUILD SUCCESS 00ee70d132a72d6f2db16dfb9a5d4e8b85114992
- [geert-renesas-devel:master] BUILD SUCCESS 505cbde9f811d5d406e8930edbc74e7d37f07b4e
- [geert-renesas-drivers:renesas-clk-for-v6.18] BUILD SUCCESS 60d0d88552cb2e6b20e98654b982b12232799f8a
- Re: [PATCH v3] arm64: dts: renesas: r8a779g3: Update thermal trip points on V4H Sparrow Hawk
- Re: [PATCH v2] checks: Remove check for graph child addresses
- Re: [PATCH 2/4] drm/rcar-du: dsi: Remove fixed PPI lane count setup
- Re: [PATCH 12/13] arm64: dts: renesas: rzt2h/rzn2h: Enable MicroSD card slot
- [PATCH 4/7] pwm: rzg2l-gpt: Add calculate_prescale() callback to struct rzg2l_gpt_info
- Re: [PATCH v3] arm64: dts: renesas: r8a779g3: Update thermal trip points on V4H Sparrow Hawk
- Re: [PATCH 27/65] media: Reset file->private_data to NULL in v4l2_fh_del()
- [PATCH v2 1/2] pinctrl: renesas: rzg2l: Fix OEN resume
- [PATCH 1/2] pinctrl: renesas: rzg2l: Fix OEN resume
- Re: [PATCH 05/13] arm64: dts: renesas: r9a09g077m44-rzt2h-evk: Add user LEDs
- Re: [PATCH 11/65] media: Replace file->private_data access with custom functions
- Re: [PATCH v7 0/6] thermal: renesas: Add support for RZ/G3E
- Re: [PATCH 04/13] arm64: dts: renesas: r9a09g087: Add pinctrl node
- Re: [PATCH 09/13] arm64: dts: renesas: r9a09g087m44-rzt2h-evk: Enable I2C0 and I2C1 support
- Re: [PATCH 07/13] arm64: dts: renesas: rzt2h-evk-common: Add pinctrl for SCI0 node
- Re: [PATCH 07/13] arm64: dts: renesas: rzt2h-evk-common: Add pinctrl for SCI0 node
- Re: [PATCH 04/13] arm64: dts: renesas: r9a09g087: Add pinctrl node
- [PATCH 7/7] arm64: dts: renesas: r9a09g047e57-smarc: Enable GPT on carrier board
- [PATCH 1/2] arm64: dts: renesas: r9a09g047e57-smarc: Fix gpio key's pin control node
- [PATCH 1/2] arm64: dts: renesas: r9a09g047e57-smarc: Fix gpio key's pin control node
- Re: [PATCH 09/13] arm64: dts: renesas: r9a09g087m44-rzt2h-evk: Enable I2C0 and I2C1 support
- [PATCH] net: pcs-rzn1-miic: Correct MODCTRL register offset
- Re: [PATCH 07/13] arm64: dts: renesas: rzt2h-evk-common: Add pinctrl for SCI0 node
- Re: [PATCH] net: pcs-rzn1-miic: Correct MODCTRL register offset
- [PATCH 0/7] Add RZ/G3E support
- Re: [PATCH RFT] mmc: host: renesas_sdhi: Fix the actual clock
- [PATCH 2/2] arm64: dts: renesas: r9a09g047e57-smarc: Use schmitt input for NMI function
- Re: [PATCH] net: pcs-rzn1-miic: Correct MODCTRL register offset
- Re: [PATCH 01/13] arm64: dts: renesas: r9a09g077: Add DT nodes for SCI channels 1-5
- Re: [PATCH 5/6] ARM: dts: renesas: gr-mango: initial board support
- Re: [PATCH 08/13] arm64: dts: renesas: r9a09g077m44-rzt2h-evk: Enable I2C0 and I2C1 support
- Re: [PATCH 10/13] arm64: dts: renesas: rzt2h-evk-common: Enable EEPROM on I2C0
- Re: [PATCH v5 1/2] iio: adc: rzg2l: Cleanup suspend/resume path
- Re: [PATCH 1/4] arm64: dts: renesas: r9a08g045: Add I3C node
- Re: [PATCH v3 0/2] Enable 64-bit polling mode for R-Car Gen3 and RZ/G2+ family
- Re: [PATCH 2/4] arm64: dts: renesas: r9a09g047: Add I3C node
- [PATCH v7 5/6] arm64: dts: renesas: r9a09g047: Add TSU node
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- [PATCH v2 4/8] drm/msm/dpu: use drmm_writeback_connector_init()
- [PATCH v5 11/15] pinctrl: qcom: use generic pin function helpers
- From: Bartosz Golaszewski
- [PATCH v5 04/15] pinctrl: mediatek: mt7988: use PINCTRL_PIN_FUNCTION()
- From: Bartosz Golaszewski
- Re: [PATCH 05/13] arm64: dts: renesas: r9a09g077m44-rzt2h-evk: Add user LEDs
- Re: [PATCH v2] checks: Remove check for graph child addresses
- [PATCH v3] checks: Remove check for graph child addresses
- [PATCH v5 01/15] devres: provide devm_kmemdup_const()
- From: Bartosz Golaszewski
- [PATCH v5 03/15] pinctrl: airoha: replace struct function_desc with struct pinfunction
- From: Bartosz Golaszewski
- Re: [PATCH 059/114] clk: stm32: stm32mp1: convert from round_rate() to determine_rate()
- Re: [PATCH 4/4] drm/rcar-du: dsi: Implement DSI command support
- [PATCH v5 07/15] pinctrl: keembay: release allocated memory in detach path
- From: Bartosz Golaszewski
- [PATCH v5 13/15] pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
- From: Bartosz Golaszewski
- [PATCH v3] arm64: dts: renesas: r8a779g3: Update thermal trip points on V4H Sparrow Hawk
- Re: [PATCH 05/13] arm64: dts: renesas: r9a09g077m44-rzt2h-evk: Add user LEDs
- [PATCH 2/7] pwm: rzg2l-gpt: Add info variable to struct rzg2l_gpt_chip
- [PATCH v5 15/15] pinctrl: qcom: make the pinmuxing strict
- From: Bartosz Golaszewski
- [PATCH v2 0/2] RZ/G2L pinctrl improvements
- [PATCH 0/2] RZ/G2L pinctrl improvements
- Re: [PATCH 06/13] arm64: dts: renesas: r9a09g087m44-rzn2h-evk: Add user LEDs
- Re: [PATCH v2] checks: Remove check for graph child addresses
- Re: [PATCH] arm64: dts: renesas: r8a779g3: Update thermal trip points on V4H Sparrow Hawk
- Re: [PATCH v3 1/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
- [PATCH 3/7] pwm: rzg2l-gpt: Add prescale_pow_of_two_mult_factor variable to struct rzg2l_gpt_info
- [PATCH v2 2/2] pinctrl: renesas: rzg2l: Drop the unnecessary pin configurations
- Re: [PATCH 11/13] arm64: dts: renesas: rzt2h/rzn2h: Enable eMMC
- Re: [PATCH 4/4] drm/rcar-du: dsi: Implement DSI command support
- Re: [PATCH v3 1/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
- [PATCH] ARM: dts: aspeed: Fix/add I2C device vendor prefixes
- [PATCH 5/7] pwm: rzg2l-gpt: Add RZ/G3E support
- [PATCH v7 1/6] soc: renesas: rz-sysc: Add syscon/regmap support
- [PATCH 2/2] pinctrl: renesas: rzg2l: Don't reconfigure the pin if it is same as reset values
- Re: [PATCH 04/13] arm64: dts: renesas: r9a09g087: Add pinctrl node
- Re: [PATCH 13/13] arm64: dts: renesas: rzt2h/rzn2h: Enable SD card slot
- Re: [PATCH RFT] mmc: host: renesas_sdhi: Fix the actual clock
- Re: [PATCH] arm64: dts: renesas: r8a779g3: Update thermal trip points on V4H Sparrow Hawk
- Re: [PATCH 03/13] arm64: dts: renesas: r9a09g077: Add pinctrl node
- [PATCH v7 2/6] dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
- [PATCH 0/2] Add Schmitt input for NMI function
- [PATCH 0/2] Add Schmitt input for NMI function
- Re: [PATCH v5 1/2] iio: adc: rzg2l: Cleanup suspend/resume path
- Re: [PATCH v3] checks: Remove check for graph child addresses
- Re: [PATCH] net: pcs-rzn1-miic: Correct MODCTRL register offset
- Re: [PATCH v2] checks: Remove check for graph child addresses
- [PATCH v7 0/6] thermal: renesas: Add support for RZ/G3E
- [PATCH v5 14/15] pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
- From: Bartosz Golaszewski
- [PATCH v5 4/7] reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
- RE: [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC
- [PATCH v5 6/7] arm64: dts: renesas: r9a08g045: Add USB support
- Re: [PATCH v4 4/8] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
- [PATCH v5 3/7] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
- [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- [PATCH v5 7/7] arm64: dts: renesas: rzg3s-smarc: Enable USB support
- [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S
- Re: [PATCH v7 1/6] soc: renesas: rz-sysc: Add syscon/regmap support
- [PATCH v5 5/7] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
- [geert-renesas-drivers:renesas-clk-fixes-for-v6.17] BUILD SUCCESS f63aaf6e71de897954fbde4e4a17a9dcdbe5e7e1
- RE: [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- Re: [PATCH v5 2/7] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- Re: [PATCH v5 3/7] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
- Re: [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S
- Re: [PATCH v7 3/6] thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
- [PATCH v2] media: dt-bindings: renesas,rzg2l-cru: Improve documentation
- Re: [PATCH v7 4/6] arm64: dts: renesas: r9a09g047: Add #address-cells property in sys node
- RE: [PATCH v7 0/6] thermal: renesas: Add support for RZ/G3E
- RE: [PATCH v7 3/6] thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
- RE: [PATCH v7 4/6] arm64: dts: renesas: r9a09g047: Add #address-cells property in sys node
- Re: [PATCH 11/13] arm64: dts: renesas: rzt2h/rzn2h: Enable eMMC
- Re: [PATCH 06/13] arm64: dts: renesas: r9a09g087m44-rzn2h-evk: Add user LEDs
- Re: [PATCH 13/13] arm64: dts: renesas: rzt2h/rzn2h: Enable SD card slot
- Re: [PATCH v2] media: dt-bindings: renesas,rzg2l-cru: Improve documentation
- [PATCH] pinctrl: renesas: rzg2l: Add suspend/resume support for Schmitt control registers
- Re: [PATCH 12/13] arm64: dts: renesas: rzt2h/rzn2h: Enable MicroSD card slot
- Re: [PATCH v7 1/6] soc: renesas: rz-sysc: Add syscon/regmap support
- Re: [PATCH v5 15/15] pinctrl: qcom: make the pinmuxing strict
- Re: [PATCH 109/114] clk: versatile: vexpress-osc: convert from round_rate() to determine_rate()
- Re: [PATCH 105/114] clk: ux500: prcmu: convert from round_rate() to determine_rate()
- Re: [PATCH 108/114] clk: versatile: icst: convert from round_rate() to determine_rate()
- Re: [PATCH 016/114] clk: gemini: convert from round_rate() to determine_rate()
- Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure
- Re: [PATCH net-next v2] net: pcs: rzn1-miic: Correct MODCTRL register offset
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [PATCH v7 4/6] dt-bindings: display: bridge: renesas,dsi: Document RZ/V2H(P) and RZ/V2N
- Re: [PATCH] arm64: dts: renesas: r8a779g3: Invert microSD voltage selector on Retronix R-Car V4H Sparrow Hawk EVTB1
- Re: [PATCH] arm64: dts: renesas: r8a779g3: Set VDDQ18_25_AVB voltage on Retronix R-Car V4H Sparrow Hawk EVTB1
- Re: [PATCH v2] media: dt-bindings: renesas,rzg2l-cru: Improve documentation
- Re: [PATCH] pmdomain: renesas: rcar-sysc: Make rcar_sysc_onecell_np __initdata
- [PATCH] arm64: dts: renesas: Minor whitespace cleanup
- From: Krzysztof Kozlowski
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- Re: [PATCH] clk: renesas: cpg-mssr: Add module reset support for RZ/T2H
- Re: [PATCH v7 2/6] clk: renesas: rzv2h-cpg: Add support for DSI clocks
- Re: [PATCH v7 0/6] Add support for DU/DSI clocks and DSI driver support for the Renesas RZ/V2H(P) SoC
- Re: [PATCH v7 1/6] clk: renesas: rzv2h-cpg: Add instance field to struct pll
- Re: [geert-renesas-devel:renesas-drivers-for-v6.18 1/1] drivers/soc/renesas/rz-sysc.c:113:16: error: cleanup argument not a function
- Re: [PATCH v7 3/6] clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
- [geert-renesas-devel:renesas-drivers-for-v6.18 1/1] drivers/soc/renesas/rz-sysc.c:113:16: error: cleanup argument not a function
- Re: [PATCH] pinctrl: renesas: rzg2l: Add suspend/resume support for Schmitt control registers
- Re: [PATCH] arm64: dts: renesas: Minor whitespace cleanup
- Re: [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S
- Re: [PATCH v2] media: dt-bindings: renesas,rzg2l-cru: Improve documentation
- Re: [PATCH 0/4] Add RZ/G3E GPT clocks and resets
- Re: [PATCH v7 0/6] Add support for DU/DSI clocks and DSI driver support for the Renesas RZ/V2H(P) SoC
- Re: [PATCH 1/7] dt-bindings: pwm: renesas,rzg2l-gpt: Document RZ/G3E support
- Re: [PATCH 6/7] arm64: dts: renesas: r9a09g047: Add GPT nodes
- Re: [PATCH 2/7] pwm: rzg2l-gpt: Add info variable to struct rzg2l_gpt_chip
- Re: [PATCH 3/7] pwm: rzg2l-gpt: Add prescale_pow_of_two_mult_factor variable to struct rzg2l_gpt_info
- Re: [PATCH 5/7] pwm: rzg2l-gpt: Add RZ/G3E support
- Re: [PATCH 4/7] pwm: rzg2l-gpt: Add calculate_prescale() callback to struct rzg2l_gpt_info
- Re: [PATCH 7/7] arm64: dts: renesas: r9a09g047e57-smarc: Enable GPT on carrier board
- RE: [PATCH 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
- Re: [PATCH v4] remoteproc: Use of_reserved_mem_region_* functions for "memory-region"
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate()
- From: Krzysztof Kozlowski
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- [PATCH v5] remoteproc: Use of_reserved_mem_region_* functions for "memory-region"
- [PATCH v3 7/8] drm: writeback: drop excess connector initialization functions
- [PATCH v3 1/8] drm/amd/display: use drmm_writeback_connector_init()
- [PATCH v3 8/8] drm: writeback: rename drm_writeback_connector_init_with_encoder()
- [PATCH v3 2/8] drm/komeda: use drmm_writeback_connector_init()
- [PATCH v3 3/8] drm/mali: use drmm_writeback_connector_init()
- [PATCH v3 0/8] drm: writeback: clean up writeback connector initialization
- [PATCH v3 5/8] drm: renesas: rcar-du: use drmm_writeback_connector_init()
- [PATCH v3 4/8] drm/msm/dpu: use drmm_writeback_connector_init()
- [PATCH v3 6/8] drm/vc4: use drmm_writeback_connector_init()
- RE: [PATCH v7 6/6] drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC
- Re: [PATCH v7 6/6] drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC
- [geert-renesas-devel:renesas-drivers-for-v6.18] BUILD REGRESSION 75601ffaea537c3180f23912ce1d0ed5f716469d
- [geert-renesas-devel:renesas-dts-for-v6.18] BUILD SUCCESS 6f21672c42fc432d69d8fd51e5d8cea145d5be5b
- Re: [PATCH v5] remoteproc: Use of_reserved_mem_region_* functions for "memory-region"
- [RESEND][PATCH v2] soc: renesas: Identify R-Car X5H
- RE: [PATCH 2/4] clk: renesas: rzv2h: Add support for parent mod clocks
- RE: [PATCH 0/4] Add RZ/G3E GPT clocks and resets
- [PATCH v3] soc: renesas: Identify R-Car X5H
- Re: [RESEND][PATCH v2] soc: renesas: Identify R-Car X5H
- Re: [RESEND][PATCH v2] soc: renesas: Identify R-Car X5H
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- [GIT PULL] clk: renesas: Fixes for v6.17
- Re: [PATCH v5] remoteproc: Use of_reserved_mem_region_* functions for "memory-region"
- Re: [PATCH v5] remoteproc: Use of_reserved_mem_region_* functions for "memory-region"
- Re: [PATCH net-next v2] net: pcs: rzn1-miic: Correct MODCTRL register offset
- [PATCH 4/4] dmaengine: sh: rz-dmac: Add runtime PM support
- [PATCH 1/4] clk: renesas: rzg2l: Simplify rzg2l_cpg_assert() and rzg2l_cpg_deassert()
- [PATCH 3/4] clk: renesas: rzv2h: Re-assert reset on deassert timeout
- [PATCH 2/4] clk: renesas: rzg2l: Re-assert reset on deassert timeout
- RE: [PATCH 3/4] dt-bindings: clock: renesas,r9a09g047-cpg: Add GPT core clocks
- [PATCH 0/4] dmaengine: sh: rz-dmac: Add runtime PM support
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- Re: [PATCH v5 1/7] dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S
- [PATCH v2] clk: renesas: r9a09g047: Add GPT clocks and resets
- Re: [PATCH 0/4] Add RZ/G3E GPT clocks and resets
- [PATCH] mmc: host: renesas_sdhi: Replace magic number '0xff' in renesas_sdhi_set_clock()
- [PATCH v2 04/11] can: rcar_can: Convert to BIT()
- Re: [PATCH v2] clk: renesas: r9a09g047: Add GPT clocks and resets
- Re: [PATCH] mmc: host: renesas_sdhi: Replace magic number '0xff' in renesas_sdhi_set_clock()
- [PATCH 3/6] can: rcar_canfd: Extract rcar_canfd_global_{,de}init()
- [PATCH v2 03/11] can: rcar_can: Convert to Runtime PM
- [PATCH v2 06/11] can: rcar_can: CTLR bitfield conversion
- [PATCH/RFC 6/6] can: rcar_canfd: Add suspend/resume support
- [PATCH v2 02/11] can: rcar_can: Add helper variable dev to rcar_can_probe()
- [PATCH v2 09/11] can: rcar_can: Mailbox bitfield conversion
- [PATCH v2 08/11] can: rcar_can: BCR bitfield conversion
- [PATCH v2 05/11] can: rcar_can: Convert to GENMASK()
- [PATCH v2 11/11] can: rcar_can: Convert to %pe
- [PATCH 5/6] can: rcar_canfd: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
- [PATCH v2 00/11] can: rcar_can: Miscellaneous cleanups and improvements
- [PATCH v2 07/11] can: rcar_can: TFCR bitfield conversion
- [PATCH v2 01/11] can: rcar_can: Consistently use ndev for net_device pointers
- [PATCH 1/6] can: rcar_canfd: Invert reset assert order
- [PATCH 2/6] can: rcar_canfd: Invert global vs. channel teardown
- [PATCH 0/6] can: rcar_canfd: Add suspend/resume support
- [PATCH 4/6] can: rcar_canfd: Invert CAN clock and close_candev() order
- [PATCH v2 10/11] can: rcar_can: Do not print alloc_candev() failures
- Re: [PATCH] mmc: host: renesas_sdhi: Replace magic number '0xff' in renesas_sdhi_set_clock()
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate()
- [PATCH 04/11] phy: renesas: Add Renesas RZ/G3E USB3.0 PHY driver
- [PATCH 05/11] usb: host: xhci-rcar: Move R-Car reg definitions
- [PATCH 08/11] usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
- [PATCH 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
- [PATCH 00/11] Add RZ/G3E USB3.2 Gen1 Host Controller support
- Re: [PATCH v3 3/9] PCI: of_property: Restore the arguments of the next level parent
- From: Manivannan Sadhasivam
- [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY
- [PATCH 02/11] clk: renesas: r9a09g047: Add USB3.0 clocks/resets
- [PATCH net-next v2] net: pcs: rzn1-miic: Correct MODCTRL register offset
- [PATCH 09/11] arm64: dts: renesas: r9a09g047: Add USB3 PHY/Host nodes
- [PATCH 07/11] usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
- [PATCH 10/11] arm64: dts: renesas: r9a09g047e57-smarc: Enable USB3HOST
- [PATCH 01/11] dt-bindings: clock: renesas,r9a09g047-cpg: Add USB3.0 core clocks
- [PATCH 11/11] arm64: defconfig: Enable RZ/G3E USB3 PHY driver
- Re: [PATCH net-next v2] net: pcs: rzn1-miic: Correct MODCTRL register offset
- From: Russell King (Oracle)
- Re: [PATCH v2 0/5] Add USB2 PHY support for RZ/T2H and RZ/N2H SoCs
- Re: [PATCH 2/3] dt-bindings: dma: rz-dmac: Document RZ/G3E family of SoCs
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate()
- From: Krzysztof Kozlowski
- Re: [PATCH v5] remoteproc: Use of_reserved_mem_region_* functions for "memory-region"
- [PATCH v4 5/6] watchdog: rzv2h: Add support for RZ/T2H
- [PATCH v2] clk: renesas: cpg-mssr: Add module reset support for RZ/T2H
- [PATCH v4 2/6] watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data
- [PATCH v2 7/9] arm64: dts: renesas: rzt2h/rzn2h: Enable eMMC
- [PATCH v2 9/9] arm64: dts: renesas: rzt2h/rzn2h: Enable SD card slot
- [PATCH v4 1/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
- [PATCH v2 2/9] arm64: dts: renesas: r9a09g077m44-rzt2h-evk: Add user LEDs
- [PATCH v2 8/9] arm64: dts: renesas: rzt2h/rzn2h: Enable MicroSD card slot
- [PATCH v2 3/9] arm64: dts: renesas: r9a09g087m44-rzn2h-evk: Add user LEDs
- [PATCH v4 4/6] watchdog: rzv2h: Add support for configurable count clock source
- [PATCH v2 5/9] arm64: dts: renesas: r9a09g087m44-rzt2h-evk: Enable I2C0 and I2C1 support
- [PATCH v4 6/6] watchdog: rzv2h: Improve error strings and add newlines
- [PATCH v4 3/6] watchdog: rzv2h: Make "oscclk" and reset controller optional
- [PATCH v2 0/9] arm64: dts: renesas: Add support for LEDs/I2C/MMC on RZ/{T2H,RZ/N2H} SoCs and boards
- [PATCH v4 0/6] Add watchdog driver support for RZ/T2H and RZ/N2H SoCs
- [PATCH v2 4/9] arm64: dts: renesas: rzt2h-evk-common: Add pinctrl for SCI0 node
- [PATCH v2 1/9] arm64: dts: renesas: r9a09g087: Add pinctrl node
- [PATCH v2 6/9] arm64: dts: renesas: rzt2h-evk-common: Enable EEPROM on I2C0
- Re: [PATCH 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
- Re: [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY
- Re: [PATCH 1/7] dt-bindings: pwm: renesas,rzg2l-gpt: Document RZ/G3E support
- Re: [PATCH 01/11] dt-bindings: clock: renesas,r9a09g047-cpg: Add USB3.0 core clocks
- Re: [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY
- Re: [PATCH v7 2/6] clk: renesas: rzv2h-cpg: Add support for DSI clocks
- Re: [PATCH v7 0/6] Add support for DU/DSI clocks and DSI driver support for the Renesas RZ/V2H(P) SoC
- RE: [PATCH/RFC 6/6] can: rcar_canfd: Add suspend/resume support
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate()
- Re: [PATCH v7 2/6] dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
- Re: [PATCH v4 1/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
- Re: [PATCH v4 2/6] watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data
- Re: [PATCH v4 5/6] watchdog: rzv2h: Add support for RZ/T2H
- Re: [PATCH v4 3/6] watchdog: rzv2h: Make "oscclk" and reset controller optional
- Re: [PATCH v4 4/6] watchdog: rzv2h: Add support for configurable count clock source
- Re: [PATCH v4 6/6] watchdog: rzv2h: Improve error strings and add newlines
- RE: [PATCH v2 02/11] can: rcar_can: Add helper variable dev to rcar_can_probe()
- RE: [PATCH v2 08/11] can: rcar_can: BCR bitfield conversion
- RE: [PATCH v2 11/11] can: rcar_can: Convert to %pe
- RE: [PATCH 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
- RE: [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY
- Re: [PATCH v3 3/9] PCI: of_property: Restore the arguments of the next level parent
- RE: [PATCH v2 10/11] can: rcar_can: Do not print alloc_candev() failures
- RE: [PATCH 1/7] dt-bindings: pwm: renesas,rzg2l-gpt: Document RZ/G3E support
- RE: [PATCH 5/6] can: rcar_canfd: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
- RE: [PATCH v2 01/11] can: rcar_can: Consistently use ndev for net_device pointers
- RE: [PATCH 4/6] can: rcar_canfd: Invert CAN clock and close_candev() order
- RE: [PATCH 2/6] can: rcar_canfd: Invert global vs. channel teardown
- [geert-renesas-drivers:renesas-clk-for-v6.18] BUILD SUCCESS 07e7ccd804dc2aac6f3f96129a86b02391b5002d
- RE: [PATCH 1/6] can: rcar_canfd: Invert reset assert order
- Re: [PATCH net-next v2] net: pcs: rzn1-miic: Correct MODCTRL register offset
- Re: [PATCH 2/3] dt-bindings: dma: rz-dmac: Document RZ/G3E family of SoCs
- Re: [PATCH net-next v2] net: pcs: rzn1-miic: Correct MODCTRL register offset
- [PATCH v6 02/25] drm/dumb-buffers: Provide helper to set pitch and size
- [geert-renesas-devel:renesas-drivers-for-v6.18] BUILD SUCCESS 2da2740fb9c8e26b6b5e20d74f2ed1d49824236d
- [PATCH v6 09/25] drm/hibmc: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 00/25] drm/dumb-buffers: Fix and improve buffer-size calculation
- [geert-renesas-devel:renesas-dts-for-v6.18] BUILD SUCCESS 115b557b6f61ca279a4754b20b8686039fdb5234
- [geert-renesas-drivers:renesas-pinctrl] BUILD SUCCESS d1d31e2739ff063da1e85cd9b44316ca5cccdba8
- [geert-renesas-devel:next] BUILD SUCCESS 2267d950908408985716b8c834cf7f4e19b6ad1f
- [geert-renesas-devel:master] BUILD SUCCESS e7aa08fd9ddf9d7098ab0880445526eb90e3cb68
- Re: [PATCH v7 4/6] dt-bindings: display: bridge: renesas, dsi: Document RZ/V2H(P) and RZ/V2N
- [PATCH v6 10/25] drm/imx/ipuv3: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 03/25] drm/gem-dma: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 13/25] drm/msm: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 11/25] drm/loongson: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 23/25] drm/xe: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 17/25] drm/renesas/rcar-du: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 01/25] drm/dumb-buffers: Sanitize output on errors
- [PATCH v6 06/25] drm/armada: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 05/25] drm/gem-vram: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 07/25] drm/exynos: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 08/25] drm/gma500: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 18/25] drm/renesas/rz-du: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 12/25] drm/mediatek: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 21/25] drm/virtio: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 16/25] drm/qxl: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH 1/2] clk: Export clk_disable_unused()
- [PATCH v6 22/25] drm/vmwgfx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 19/25] drm/rockchip: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 20/25] drm/tegra: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 24/25] drm/xen: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 04/25] drm/gem-shmem: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 14/25] drm/nouveau: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v6 15/25] drm/omapdrm: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH 2/2] clk: renesas: rzg2l: Register PM notifier to disable unused clocks
- [PATCH 0/2] clk: renesas: rzg2l: Disable unused clocks after resume
- Re: [PATCH v7 6/6] drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC
- RE: [PATCH RFT] mmc: host: renesas_sdhi: Fix the actual clock
- RE: [PATCH v6 18/25] drm/renesas/rz-du: Compute dumb-buffer sizes with drm_mode_size_dumb()
- RE: [PATCH v6 18/25] drm/renesas/rz-du: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v6 18/25] drm/renesas/rz-du: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v7 5/6] drm: renesas: rz-du: mipi_dsi: Add support for LPCLK clock handling
- Re: [PATCH RFT] mmc: host: renesas_sdhi: Fix the actual clock
- Re: [PATCH] mmc: host: renesas_sdhi: Replace magic number '0xff' in renesas_sdhi_set_clock()
- Re: [PATCH RFT] mmc: host: renesas_sdhi: Fix the actual clock
- RE: [PATCH/RFC 6/6] can: rcar_canfd: Add suspend/resume support
- [PATCH v2 3/4] can: rcar_canfd: Simplify nominal bit rate config
- [PATCH v2 4/4] can: rcar_canfd: Simplify data bit rate config
- [PATCH v2 1/4] can: rcar_canfd: Add shared_bittiming variable to struct rcar_canfd_hw_info
- [PATCH v2 2/4] can: rcar_canfd: Update RCANFD_CFG_* macros
- [PATCH v2 0/4] R-Car CANFD Improvements
- Re: [PATCH 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
- Re: [PATCH 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
- Re: [PATCH 03/11] dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY
- [PATCH 6/6] arm64: dts: renesas: rzt2h-n2h-evk: Enable USB2.0 support
- [PATCH 2/6] arm64: dts: renesas: r9a09g087: Add WDT nodes
- [PATCH 1/6] arm64: dts: renesas: r9a09g077: Add WDT nodes
- [PATCH 5/6] arm64: dts: renesas: r9a09g087: Add USB2.0 support
- [PATCH 4/6] arm64: dts: renesas: r9a09g077: Add USB2.0 support
- [PATCH 0/6] arm64: dts: renesas: Add support for WDT/USB2.0 on RZ/{T2H,N2H} SoCs and EVKs
- [PATCH] phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
- [PATCH 3/6] arm64: dts: renesas: rzt2h-evk-common: Enable WDT2
- [PATCH] media: vsp1: Export missing vsp1_isp_free_buffer symbol
- Re: [PATCH] media: vsp1: Export missing vsp1_isp_free_buffer symbol
- Re: [PATCH 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
- Re: [PATCH] media: vsp1: Export missing vsp1_isp_free_buffer symbol
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate()
- From: Krzysztof Kozlowski
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate()
- From: Krzysztof Kozlowski
- Re: (subset) [PATCH 098/114] clk: samsung: cpu: convert from round_rate() to determine_rate()
- From: Krzysztof Kozlowski
- Re: (subset) [PATCH 099/114] clk: samsung: pll: convert from round_rate() to determine_rate()
- From: Krzysztof Kozlowski
- Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure
- Re: [PATCH 049/114] clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate()
- Re: [PATCH 050/114] clk: spacemit: ccu_mix: convert from round_rate() to determine_rate()
- Re: [PATCH 051/114] clk: spacemit: ccu_pll: convert from round_rate() to determine_rate()
- Re: [PATCH v2 3/4] can: rcar_canfd: Simplify nominal bit rate config
- Re: [PATCH v2 1/4] can: rcar_canfd: Add shared_bittiming variable to struct rcar_canfd_hw_info
- Re: [PATCH v2 02/12] iio: adc: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3] net: pcs: rzn1-miic: Correct MODCTRL register offset
- Re: [PATCH v2 2/4] can: rcar_canfd: Update RCANFD_CFG_* macros
- Re: [PATCH v2 2/4] can: rcar_canfd: Update RCANFD_CFG_* macros
- Re: [PATCH v6 06/15] pinctrl: imx: don't access the pin function radix tree directly
- [PATCH v3 02/12] iio: adc: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 08/12] iio: light: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 00/12] iio: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 07/12] iio: imu: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 01/12] iio: accel: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 09/12] iio: magnetometer: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 10/12] iio: pressure: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH 19/65] media: camss: Replace .open() file operation with v4l2_fh_open()
- Re: [PATCH 20/65] media: camss: Remove custom .release fop()
- [PATCH v3 06/12] iio: gyro: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 03/12] iio: chemical: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 12/12] iio: temperature: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 05/12] iio: dac: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 11/12] iio: proximity: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v3 04/12] iio: common: Remove redundant pm_runtime_mark_last_busy() calls
- [PATCH v1] clk: renesas: r8a779g0: Add ZG clocks
- RE: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure
- [PATCH v1] arm64: dts: renesas: r8a779g0: Add new gsx node for V4H
- Re: [PATCH v3 08/12] iio: light: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH 049/114] clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate()
- Re: [PATCH 050/114] clk: spacemit: ccu_mix: convert from round_rate() to determine_rate()
- Re: [PATCH 051/114] clk: spacemit: ccu_pll: convert from round_rate() to determine_rate()
- Re: [PATCH v3 05/12] iio: dac: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 09/12] iio: magnetometer: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 01/12] iio: accel: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 06/12] iio: gyro: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 02/12] iio: adc: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 12/12] iio: temperature: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 11/12] iio: proximity: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 07/12] iio: imu: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 10/12] iio: pressure: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 03/12] iio: chemical: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 04/12] iio: common: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH v3 05/12] iio: dac: Remove redundant pm_runtime_mark_last_busy() calls
- Re: [PATCH 0/2] clk: renesas: rzg2l: Disable unused clocks after resume
- Re: (subset) [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate()
- Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure
- Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure
- [PATCH] dt-bindings: soc: renesas: Document R-Car X5H
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- From: Bartosz Golaszewski
- Re: [PATCH] dt-bindings: soc: renesas: Document R-Car X5H
- Re: [PATCH] dt-bindings: soc: renesas: Document R-Car X5H
- [geert-renesas-drivers:renesas-clk-for-v6.18] BUILD SUCCESS 6bbf77bb22565332744c74e9806f8fb50402d73e
- Re: [PATCH 112/114] clk: scmi: remove round_rate() in favor of determine_rate()
- Re: [RFC PATCH 1/8] drm: writeback: Refactor drm_writeback_connector structure
- Re: [PATCH v4 0/4] thermal: renesas: Add support for RZ/G3S
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC
- [PATCH net-next v4 3/4] net: renesas: rswitch: add offloading for L2 switching
- Re: [PATCH net-next v2] net: pcs: rzn1-miic: Correct MODCTRL register offset
- [net-next PATCH v4 0/4] net: renesas: rswitch: R-Car S4 add HW offloading for layer 2 switching
- Re: [PATCH net-next v2] net: pcs: rzn1-miic: Correct MODCTRL register offset
- [PATCH net-next v4 2/4] net: renesas: rswitch: configure default ageing time
- [PATCH net-next v4 4/4] net: renesas: rswitch: add modifiable ageing time
- [PATCH net-next v4 1/4] net: renesas: rswitch: rename rswitch.c to rswitch_main.c
- Re: [PATCH] PCI: rcar-host: Use proper IRQ domain
- From: Manivannan Sadhasivam
- [PATCH v2] regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
- [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
- [PATCH 0/3] phy: Remove redundant ternary operators
- Re: [PATCH v2 4/4] dt-bindings: display: bridge: renesas,dsi-csi2-tx: Allow panel@ subnode
- [PATCH] thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
- Re: [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
- Re: [PATCH] regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
- Re: [PATCH] regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
- Re: [PATCH] regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
- Re: [PATCH] dt-bindings: input: touchscreen: goodix: Drop 'interrupts' requirement
- [geert-renesas-drivers:master] BUILD SUCCESS b3c4f4122b286b19df1138f6f5eb9a0a8e6d1d79
- Re: [PATCH] thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- From: Bartosz Golaszewski
- Re: [PATCH v2] arm64: dts: renesas: r8a779g3: Add Argon40 fan HAT DTO to Retronix R-Car V4H Sparrow Hawk
- Re: [PATCH net-next v4 4/4] net: renesas: rswitch: add modifiable ageing time
- Re: [RESEND PATCH 2/2] hwmon: (pwm-fan) Implement after shutdown fan settings
- Re: [RESEND PATCH 1/2] dt-bindings: hwmon: pwm-fan: Document after shutdown fan settings
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- [PATCH v6 05/15] pinctrl: mediatek: moore: replace struct function_desc with struct pinfunction
- From: Bartosz Golaszewski
- [PATCH v6 12/15] pinctrl: allow to mark pin functions as requestable GPIOs
- From: Bartosz Golaszewski
- [PATCH v6 10/15] pinctrl: make struct pinfunction a pointer in struct function_desc
- From: Bartosz Golaszewski
- [geert-renesas-devel:master] BUILD SUCCESS 0424f9660128275846e8ae59dfbdc3afd83fb6cc
- [PATCH v2 01/11] media: adv7180: Move adv7180_set_power() and init_device()
- [PATCH v6 11/15] pinctrl: qcom: use generic pin function helpers
- From: Bartosz Golaszewski
- [PATCH v6 06/15] pinctrl: imx: don't access the pin function radix tree directly
- From: Bartosz Golaszewski
- [PATCH v6 08/15] pinctrl: keembay: use a dedicated structure for the pinfunction description
- From: Bartosz Golaszewski
- [PATCH v6 04/15] pinctrl: mediatek: mt7988: use PINCTRL_PIN_FUNCTION()
- From: Bartosz Golaszewski
- Re: [PATCH 0/2] clk: renesas: rzg2l: Disable unused clocks after resume
- Re: [PATCH 0/2] clk: renesas: rzg2l: Disable unused clocks after resume
- Re: [PATCH net-next 0/3] sh_eth: PM-related cleanups
- From: patchwork-bot+netdevbpf
- [PATCH v2 06/11] media: adv7180: Power down decoder when configuring the device
- [PATCH v6 01/15] devres: provide devm_kmemdup_const()
- From: Bartosz Golaszewski
- [PATCH v6 03/15] pinctrl: airoha: replace struct function_desc with struct pinfunction
- From: Bartosz Golaszewski
- Re: [PATCH v7 6/6] drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC
- [PATCH v6 07/15] pinctrl: keembay: release allocated memory in detach path
- From: Bartosz Golaszewski
- [PATCH v2 00/11] media: adv7180: Improve the control over decoder power
- [PATCH v6 13/15] pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
- From: Bartosz Golaszewski
- [PATCH v2 08/11] media: adv7180: Remove the s_power callback
- [PATCH v6 15/15] pinctrl: qcom: make the pinmuxing strict
- From: Bartosz Golaszewski
- [PATCH v2 03/11] media: adv7180: Move state mutex handling outside init_device()
- [PATCH v2 07/11] media: adv7180: Split device initialization and reset
- [PATCH v2 11/11] media: adv7180: Only validate format in querystd
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- From: Bartosz Golaszewski
- Re: [PATCH v7 6/6] drm: renesas: rz-du: mipi_dsi: Add support for RZ/V2H(P) SoC
- [PATCH v2 04/11] media: adv7180: Use v4l2-ctrls core to handle s_ctrl locking
- [PATCH v2 05/11] media: adv7180: Setup controls every time the device is reset
- Re: [PATCH 112/114] clk: scmi: remove round_rate() in favor of determine_rate()
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- [PATCH v6 14/15] pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
- From: Bartosz Golaszewski
- [PATCH v6 00/15] pinctrl: introduce the concept of a GPIO pin function category
- From: Bartosz Golaszewski
- [PATCH v6 09/15] pinctrl: constify pinmux_generic_get_function()
- From: Bartosz Golaszewski
- [PATCH v6 02/15] pinctrl: ingenic: use struct pinfunction instead of struct function_desc
- From: Bartosz Golaszewski
- [PATCH v2 02/11] media: adv7180: Add missing lock in suspend callback
- [PATCH v2 09/11] media: adv7180: Do not write format to device in set_fmt
- [PATCH v2 10/11] media: adv7180: Only validate format in s_std
- Re: [PATCH 112/114] clk: scmi: remove round_rate() in favor of determine_rate()
- Re: [PATCH net-next v2 0/9] Add PCS support for Renesas RZ/{T2H,N2H} SoCs
- Re: [PATCH v4 1/4] arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J1
- Re: [PATCH v2] dt-bindings: soc: renesas: Document R-Car X5H
- Re: [PATCH 1/2] dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet and GMAC clocks
- Re: [PATCH net-next v4 3/4] net: renesas: rswitch: add offloading for L2 switching
- Re: [PATCH v3 4/9] dt-bindings: PCI: renesas,r9a08g045s33-pcie: Add documentation for the PCIe IP on Renesas RZ/G3S
- Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH v4 0/4] thermal: renesas: Add support for RZ/G3S
- Re: [PATCH v3 4/9] dt-bindings: PCI: renesas,r9a08g045s33-pcie: Add documentation for the PCIe IP on Renesas RZ/G3S
- Re: [PATCH] dt-bindings: input: touchscreen: goodix: Drop 'interrupts' requirement
- [PATCH 1/2] clocksource/drivers/sh_cmt: Split start/stop of clock source and events
- [PATCH 2/2] clocksource/drivers/sh_cmt: Do not power down channels used for events
- Re: [PATCH v5 00/15] pinctrl: introduce the concept of a GPIO pin function category
- From: Bartosz Golaszewski
- [RFC/PATCH 0/2] clocksource/drivers/sh_cmt: Improve clock event design
- Re: [PATCH] dt-bindings: soc: renesas: Document R-Car X5H
- [PATCH 2/2] clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks
- [PATCH 1/2] dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet and GMAC clocks
- [PATCH 0/2] Add Ethernet and GMAC clocks for Renesas RZ/{T2H, N2H} SoCs
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate()
- Re: [PATCH v6 01/15] devres: provide devm_kmemdup_const()
- Re: [PATCH v3 4/9] dt-bindings: PCI: renesas,r9a08g045s33-pcie: Add documentation for the PCIe IP on Renesas RZ/G3S
- RE: [PATCH net-next v4 3/4] net: renesas: rswitch: add offloading for L2 switching
- [PATCH v4 4/4] arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J2
- [PATCH v4 3/4] arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J1
- RE: [PATCH net-next v4 4/4] net: renesas: rswitch: add modifiable ageing time
- [PATCH v4 2/4] arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J2
- [PATCH v4 1/4] arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J1
- [PATCH v4 0/4] arm64: dts: renesas: sparrow-hawk: Add overlays for camera sensors
- [PATCH] thermal/drivers/rcar_gen3: Fix comment typo
- [PATCH v3] arm64: dts: renesas: r8a779g3: Add Argon40 fan HAT DTO to Retronix R-Car V4H Sparrow Hawk
- Re: [PATCH v2] arm64: dts: renesas: r8a779g3: Add Argon40 fan HAT DTO to Retronix R-Car V4H Sparrow Hawk
- Re: [PATCH v2] clk: renesas: cpg-mssr: Add module reset support for RZ/T2H
- Re: [PATCH v2] clk: renesas: cpg-mssr: Add module reset support for RZ/T2H
- Re: [PATCH v3 0/2] Enable 64-bit polling mode for R-Car Gen3 and RZ/G2+ family
- Re: [PATCH v3 0/2] Enable 64-bit polling mode for R-Car Gen3 and RZ/G2+ family
- Re: [PATCH] thermal/drivers/rcar_gen3: Fix comment typo
- Re: [PATCH v3 0/2] Enable 64-bit polling mode for R-Car Gen3 and RZ/G2+ family
- Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC
- Bouncing email for Renesas Versaclock 7 Clock Driver maintainer
- Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH v3 0/2] Enable 64-bit polling mode for R-Car Gen3 and RZ/G2+ family
- [PATCH v2] dt-bindings: soc: renesas: Document R-Car X5H
- [GIT PULL 4/4] Renesas DTS updates for v6.18
- Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC
- [GIT PULL] clk: renesas: Updates for v6.18
- [GIT PULL] pinctrl: renesas: Updates for v6.18
- Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC
- [GIT PULL 0/4] Renesas SoC updates for v6.18
- [GIT PULL 3/4] Renesas driver updates for v6.18
- [GIT PULL 1/4] Renesas ARM defconfig updates for v6.18
- [GIT PULL 2/4] Renesas ARM SoC updates for v6.18
- Re: Bouncing email for Renesas Versaclock 7 Clock Driver maintainer
- Re: [PATCH v3 5/9] PCI: rzg3s-host: Add Initial PCIe Host Driver for Renesas RZ/G3S SoC
- From: Manivannan Sadhasivam
- [PATCH 0/3] pinctrl: Use int type to store negative error codes
- [PATCH 3/3] pinctrl: renesas: Use int type to store negative error codes
- Re: [PATCH v3] arm64: dts: renesas: r8a779g3: Add Argon40 fan HAT DTO to Retronix R-Car V4H Sparrow Hawk
- Re: [PATCH v2] drm/rcar-du: dsi: Fix 1/2/3 lane support
- Re: [PATCH v2 1/2] thermal: rcar_gen3: Add support for per-SoC default trim values
- [PATCH v2] drm/rcar-du: dsi: Implement DSI command support
- Re: [PATCH 4/4] drm/rcar-du: dsi: Implement DSI command support
- Re: [PATCH 1/2] dt-bindings: hwmon: pwm-fan: Document after shutdown fan settings
- Re: [PATCH v2] dt-bindings: soc: renesas: Document R-Car X5H
- From: Krzysztof Kozlowski
- Re: [PATCH v2] dt-bindings: soc: renesas: Document R-Car X5H
- Re: [GIT PULL] pinctrl: renesas: Updates for v6.18
- [PATCH net-next v5 3/4] net: renesas: rswitch: add offloading for L2 switching
- [net-next PATCH v5 0/4] net: renesas: rswitch: R-Car S4 add HW offloading for layer 2 switching
- [PATCH net-next v5 2/4] net: renesas: rswitch: configure default ageing time
- [PATCH net-next v5 4/4] net: renesas: rswitch: add modifiable ageing time
- [PATCH net-next v5 1/4] net: renesas: rswitch: rename rswitch.c to rswitch_main.c
- Re: [PATCH v3 3/9] PCI: of_property: Restore the arguments of the next level parent
- From: Manivannan Sadhasivam
- Re: [PATCH v3 5/9] PCI: rzg3s-host: Add Initial PCIe Host Driver for Renesas RZ/G3S SoC
- From: Manivannan Sadhasivam
- [PATCH] MAINTAINERS: Add entries for Renesas Versaclock {3,7} clock drivers
- Re: [PATCH 2/4] dmaengine: sh: rz-dmac: Use devm_add_action_or_reset()
- [PATCH 4/4] dmaengine: sh: rz-dmac: Add system sleep power management
- [PATCH 2/4] dmaengine: sh: rz-dmac: Use devm_add_action_or_reset()
- [PATCH 3/4] dmaengine: sh: rz-dmac: Refactor runtime PM handling
- [PATCH 1/4] dmaengine: sh: rz-dmac: Use devm_pm_runtime_enable()
- Re: [PATCH v6 00/15] pinctrl: introduce the concept of a GPIO pin function category
- Re: [PATCH 0/4] dmaengine: sh: rz-dmac: Add system sleep PM support
- Re: [PATCH v3] clk: renesas: cpg-mssr: Add module reset support for RZ/T2H
- Re: [PATCH v6 04/15] pinctrl: mediatek: mt7988: use PINCTRL_PIN_FUNCTION()
- [PATCH 0/4] dmaengine: sh: rz-dmac: Add system sleep PM support
- Re: [PATCH v3 1/6] dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
- Re: [PATCH v3 2/6] watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data
- Re: [PATCH v3 5/6] watchdog: rzv2h: Add support for RZ/T2H
- Re: [PATCH v3 3/6] watchdog: rzv2h: Make "oscclk" and reset controller optional
- Re: [PATCH v3 4/6] watchdog: rzv2h: Add support for configurable count clock source
- [geert-renesas-devel:renesas-dts-for-v6.18] BUILD SUCCESS a3d8443fcb36739ab37901d8fee7c7d2c4db78ab
- Re: [PATCH v3 6/6] watchdog: rzv2h: Improve error strings and add newlines
- Re: [PATCH 2/4] dmaengine: sh: rz-dmac: Use devm_add_action_or_reset()
- Re: [PATCH v2 4/4] dt-bindings: display: bridge: renesas,dsi-csi2-tx: Allow panel@ subnode
- Re: [PATCH] MAINTAINERS: Add entries for Renesas Versaclock {3,7} clock drivers
- Re: [PATCH v5 0/4] arm64: dts: renesas: sparrow-hawk: Add overlays for camera sensors
- Re: [PATCH 2/4] dmaengine: sh: rz-dmac: Use devm_add_action_or_reset()
- Re: [PATCH v3 5/9] PCI: rzg3s-host: Add Initial PCIe Host Driver for Renesas RZ/G3S SoC
- Re: [PATCH v6 00/15] pinctrl: introduce the concept of a GPIO pin function category
- Re: [PATCH 0/2] clk: renesas: rzg2l: Disable unused clocks after resume
- Re: [PATCH v5 4/7] reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
- RE: [PATCH 3/4] dmaengine: sh: rz-dmac: Refactor runtime PM handling
- [geert-renesas-devel:next] BUILD SUCCESS fb4033e24970baa3fe10b9ce9f95f8908b72db37
- [geert-renesas-drivers:renesas-r9a09g077-dt-binding-defs] BUILD SUCCESS 0dcfb6fcdd085bbfcdfdcf64a7d4a75c63c108af
- [geert-renesas-devel:master] BUILD SUCCESS 14222b52662487cfed5de86314a9b66f324e2f98
- [geert-renesas-drivers:renesas-clk-for-v6.18] BUILD SUCCESS 09e3a0467375fe7bb19c66eaf5ad3edfd90ea16c
- Re: [PATCH] regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
- Re: [PATCH net-next 2/3] sh_eth: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
- [PATCH v3] PCI: endpoint: pci-epf-test: Limit PCIe BAR size for fixed BARs
- Re: [PATCH v2 2/2] drm/panel: ilitek-ili9881c: Add configuration for 5" Raspberry Pi 720x1280
- Re: [PATCH v2] arm64: dts: renesas: r8a779g3: Add Argon40 fan HAT DTO to Retronix R-Car V4H Sparrow Hawk
- Re: [PATCH v2] PCI: endpoint: pci-epf-test: Limit PCIe BAR size for fixed BARs
- Re: [PATCH] dt-bindings: ili9881c: Allow port subnode
- Re: [RESEND PATCH 1/2] dt-bindings: hwmon: pwm-fan: Document after shutdown fan settings
- Re: [PATCH 1/2] dt-bindings: ili9881c: Document 5" Raspberry Pi 720x1280
- Re: [PATCH 2/4] clk: renesas: rzg2l: Re-assert reset on deassert timeout
- Re: [PATCH 2/4] clk: renesas: rzg2l: Re-assert reset on deassert timeout
- Re: [PATCH 3/4] clk: renesas: rzv2h: Re-assert reset on deassert timeout
- Re: [PATCH v7 01/16] pinctrl: check the return value of pinmux_ops::get_function_name()
- From: Bartosz Golaszewski
- Re: [PATCH 2/4] clk: renesas: rzg2l: Re-assert reset on deassert timeout
- Re: [PATCH v7 01/16] pinctrl: check the return value of pinmux_ops::get_function_name()
- Re: [PATCH net-next 01/10] dt-bindings: net: pcs: renesas,rzn1-miic: Document RZ/T2H and RZ/N2H SoCs
- Re: [PATCH v7 01/16] pinctrl: check the return value of pinmux_ops::get_function_name()
- Re: [PATCH v7 13/16] pinctrl: allow to mark pin functions as requestable GPIOs
- Re: [PATCH v7 15/16] pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
- Re: [PATCH v2 2/2] clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks
- Re: [PATCH v7 12/16] pinctrl: qcom: use generic pin function helpers
- From: Krzysztof Kozlowski
- Re: [PATCH v7 00/16] pinctrl: introduce the concept of a GPIO pin function category
- Re: [PATCH v7 12/16] pinctrl: qcom: use generic pin function helpers
- From: Krzysztof Kozlowski
- [PATCH v2 1/2] dt-bindings: net: altr,socfpga-stmmac: Constrain interrupts
- From: Krzysztof Kozlowski
- Re: [PATCH net-next 2/2] dt-bindings: net: renesas,rzn1-gmac: Constrain interrupts
- Re: [PATCH v2 1/2] dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet and GMAC clocks
- Re: [PATCH net-next 2/2] dt-bindings: net: renesas,rzn1-gmac: Constrain interrupts
- From: Krzysztof Kozlowski
- Re: [PATCH v7 12/16] pinctrl: qcom: use generic pin function helpers
- Re: [PATCH v7 16/16] pinctrl: qcom: make the pinmuxing strict
- Re: [PATCH net-next 2/4] dt-bindings: net: renesas,rzv2h-gbeth: Document Renesas RZ/T2H and RZ/N2H SoCs
- [PATCH v2 2/2] dt-bindings: net: renesas,rzn1-gmac: Constrain interrupts
- From: Krzysztof Kozlowski
- Re: [PATCH net-next 1/4] dt-bindings: net: dwmac: Increase 'maxItems' for 'interrupts' and 'interrupt-names'
- From: Krzysztof Kozlowski
- Re: [PATCH net-next 1/4] dt-bindings: net: dwmac: Increase 'maxItems' for 'interrupts' and 'interrupt-names'
- Re: [PATCH v7 00/16] pinctrl: introduce the concept of a GPIO pin function category
- From: Bartosz Golaszewski
- Re: [PATCH 2/4] clk: renesas: rzg2l: Re-assert reset on deassert timeout
- Re: [PATCH v7 13/16] pinctrl: allow to mark pin functions as requestable GPIOs
- From: Bartosz Golaszewski
- Re: [PATCH v7 16/16] pinctrl: qcom: make the pinmuxing strict
- From: Bartosz Golaszewski
[Index of Archives]
[Linux Samsung SOC]
[Linux Wireless]
[Linux Bluetooth]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]