Hi Biju,
Thank you for your patch.
On Thu, Aug 14, 2025 at 07:41:11PM +0100, Biju wrote:
> From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
>
> The GTIOC4{A,B} IOs are available on the carrier board's PMOD1_6A
> connector. Enable the GPT on the carrier board by adding the GPT pinmux
> and node on the carrier board dtsi file.
>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@xxxxxxxxxxxxxx>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
> index 1e67f0a2a945..093c0202b4f9 100644
> --- a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
> +++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
> @@ -84,6 +84,14 @@ &can_transceiver1 {
> };
> #endif
>
> +#if (!SW_LCD_EN) && (!SW_GPIO8_CAN0_STB)
> +&gpt0 {
> + pinctrl-0 = <&gpt0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +#endif
> +
> &i2c0 {
> pinctrl-0 = <&i2c0_pins>;
> pinctrl-names = "default";
> @@ -125,6 +133,11 @@ can4_pins: can4 {
> };
> };
>
> + gpt0_pins: gpt0 {
> + pinmux = <RZG3E_PORT_PINMUX(5, 4, 10)>, /* GTIOC4A */
> + <RZG3E_PORT_PINMUX(5, 5, 10)>; /* GTIOC4B */
> + };
> +
> i2c0_pins: i2c0 {
> pinmux = <RZG3E_PORT_PINMUX(D, 4, 4)>, /* SCL0 */
> <RZG3E_PORT_PINMUX(D, 5, 4)>; /* SDA0 */
> --
> 2.43.0
>
Thanks & Regards,
Tommaso
