Hi Conor, Thanks for the feedback. > -----Original Message----- > From: Conor Dooley <conor@xxxxxxxxxx> > Sent: 20 August 2025 21:11 > Subject: Re: [PATCH 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST > > On Wed, Aug 20, 2025 at 06:17:53PM +0100, Biju wrote: > > From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > > > Document the Renesas RZ/G3E USB3.2 Gen2 Host Controller (a.k.a USB3HOST). > > The USB3HOST is compliant with the Universal Serial Bus 3.2 > > Specification Revision 1.0. > > - Supports 1 downstream USB receptacles > > - Number of SSP Gen2 or SS ports: 1 > > - Number of HS or FS or LS ports: 1 > > - Supports Super Speed Plus Gen2x1 (10 Gbps), Super Speed (5 Gbps), > > High Speed (480 Mbps), Full Speed (12Mbps), and Low Speed (1.5 Mbps). > > - Supports all transfer-types: Control, Bulk, Interrupt, Isochronous, and > > these split-transactions. > > - Supports Power Control and Over Current Detection. > > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > > +--- > > +$id: http://devicetree.org/schemas/usb/renesas,rzg3e-xhci.yaml# > > > + const: renesas,r9a09g047-xhci > > How come these don't match? I don't understand your naming scheme at all, so idk which is even correct! r9a09g047 is SoC part number which also known as RZ/G3E SoC. I just followed the convention used in [1] and [2]. Please let me know I should change rzg3e-xhci.yaml->r9a09g047-xhci.yaml ? [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/Documentation/devicetree/bindings?h=next-20250820&id=44b91d61c505863b8ae90b7094aee5ca0dce808f [2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/Documentation/devicetree/bindings?h=next-20250820&id=b2d25905366b4e6791f60e6bc76a636d1b88e6f8 Cheers, Biju
