Convert CAN Bit Configuration Register field accesses to use the
FIELD_PREP() bitfield access macro. While at it, fix the misspelling of
BRP.
This gets rid of custom function-like field preparation macros.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v2:
- No changes.
---
drivers/net/can/rcar/rcar_can.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 6f28dc9354511120..4c5c1f0446913d37 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -152,10 +152,10 @@ static const struct can_bittiming_const rcar_can_bittiming_const = {
#define RCAR_CAN_N_RX_MKREGS2 8
/* Bit Configuration Register settings */
-#define RCAR_CAN_BCR_TSEG1(x) (((x) & 0x0f) << 20)
-#define RCAR_CAN_BCR_BPR(x) (((x) & 0x3ff) << 8)
-#define RCAR_CAN_BCR_SJW(x) (((x) & 0x3) << 4)
-#define RCAR_CAN_BCR_TSEG2(x) ((x) & 0x07)
+#define RCAR_CAN_BCR_TSEG1 GENMASK(23, 20)
+#define RCAR_CAN_BCR_BRP GENMASK(17, 8)
+#define RCAR_CAN_BCR_SJW GENMASK(5, 4)
+#define RCAR_CAN_BCR_TSEG2 GENMASK(2, 0)
/* Mailbox and Mask Registers bits */
#define RCAR_CAN_IDE BIT(31) /* ID Extension */
@@ -428,9 +428,10 @@ static void rcar_can_set_bittiming(struct net_device *ndev)
struct can_bittiming *bt = &priv->can.bittiming;
u32 bcr;
- bcr = RCAR_CAN_BCR_TSEG1(bt->phase_seg1 + bt->prop_seg - 1) |
- RCAR_CAN_BCR_BPR(bt->brp - 1) | RCAR_CAN_BCR_SJW(bt->sjw - 1) |
- RCAR_CAN_BCR_TSEG2(bt->phase_seg2 - 1);
+ bcr = FIELD_PREP(RCAR_CAN_BCR_TSEG1, bt->phase_seg1 + bt->prop_seg - 1) |
+ FIELD_PREP(RCAR_CAN_BCR_BRP, bt->brp - 1) |
+ FIELD_PREP(RCAR_CAN_BCR_SJW, bt->sjw - 1) |
+ FIELD_PREP(RCAR_CAN_BCR_TSEG2, bt->phase_seg2 - 1);
/* Don't overwrite CLKR with 32-bit BCR access; CLKR has 8-bit access.
* All the registers are big-endian but they get byte-swapped on 32-bit
* read/write (but not on 8-bit, contrary to the manuals)...
--
2.43.0
