On Fri, 08 Aug 2025 22:52:04 +0100, Prabhakar wrote:
> This patch series adds support for the USB2 PHY on the Renesas RZ/T2H
> and RZ/N2H SoCs. The USB2 PHY driver has been updated to handle
> differences in clocking, reset handling, and register configurations
> specific to these SoCs.
>
> v1->v2:
> - Added Acked-by from Conor for the DT bindings.
> - Renamed drvdata to phy_data.
> - Updated commit message to clarify the change.
> - Dropped local phy_data variable in probe, using channel->phy_data
> directly.
> - Included the necessary header files.
> - Simplified device/host detection in rcar_gen3_check_id() as suggested
> by Geert.
> - Added Reviewed-by from Neil.
>
> [...]
Applied, thanks!
[1/5] dt-bindings: phy: renesas,usb2-phy: Add RZ/T2H and RZ/N2H support
commit: ab9c8aeb2d208381a7c948ea2f753cbe8a451502
[2/5] phy: renesas: rcar-gen3-usb2: store drvdata pointer in channel
commit: f75806d26318c08ddb79652cce89086e4da17257
[3/5] phy: renesas: rcar-gen3-usb2: Allow SoC-specific OBINT bits via phy_data
commit: 4b7aa47e4c2c921b9511389bf42a4e30d64373e6
[4/5] phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC
commit: b725741f1c21e8507a58ae86c5a80ca383f96852
[5/5] phy: renesas: rcar-gen3-usb2: Move debug print after register value is updated
commit: 5f54134428b48261151c725c64b40be54e373345
Best regards,
--
~Vinod
