[PATCH v2] regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The 5" and 7" Raspberry Pi 720x1280 Display 2 MCU is a bit more
complex than the original Display 1 ATTINY88 and the binding is
also a bit more demanding. Split the binding into separate file
and fill in required gpio-controller, #gpio-cells and #pwm-cells
which must be present for the V2 MCU. Include mention of the 5"
panel in the description of Display 2, as the 5" panel uses the
same MCU.

Fixes: 6d09c6e474bd ("regulator: dt-bindings: rpi-panel: Add regulator for 7" Raspberry Pi 720x1280")
Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
---
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@xxxxxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Cc: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Liam Girdwood <lgirdwood@xxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-rpi-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
---
V2: Replace node name from gpio@ to regulator@
---
 ...,7inch-touchscreen-panel-regulator-v2.yaml | 61 +++++++++++++++++++
 ...ypi,7inch-touchscreen-panel-regulator.yaml |  7 +--
 2 files changed, 63 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml

diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml
new file mode 100644
index 0000000000000..37b9ed371b67d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/raspberrypi,7inch-touchscreen-panel-regulator-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RaspberryPi 5" and 7" display V2 MCU-based regulator/backlight controller
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
+
+description: |
+  The RaspberryPi 5" and 7" display 2 has an MCU-based regulator, PWM
+  backlight and GPIO controller on the PCB, which is used to turn the
+  display unit on/off and control the backlight.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: raspberrypi,touchscreen-panel-regulator-v2
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+    description:
+      The first cell is the pin number, and the second cell is used to
+      specify the gpio polarity (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW).
+
+  "#pwm-cells":
+    const: 3
+    description: See ../../pwm/pwm.yaml for description of the cell formats.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - "#pwm-cells"
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      regulator@45 {
+        compatible = "raspberrypi,touchscreen-panel-regulator-v2";
+        reg = <0x45>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #pwm-cells = <3>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
index 18944d39d08fc..41678400e63fa 100644
--- a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
@@ -12,17 +12,14 @@ maintainers:
 description: |
   The RaspberryPi 7" display has an ATTINY88-based regulator/backlight
   controller on the PCB, which is used to turn the display unit on/off
-  and control the backlight. The V2 supports 5" and 7" panels and also
-  offers PWM backlight control.
+  and control the backlight.
 
 allOf:
   - $ref: regulator.yaml#
 
 properties:
   compatible:
-    enum:
-      - raspberrypi,7inch-touchscreen-panel-regulator
-      - raspberrypi,touchscreen-panel-regulator-v2
+    const: raspberrypi,7inch-touchscreen-panel-regulator
 
   reg:
     maxItems: 1
-- 
2.50.1





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux