Hi Prabhakar,
On Tue, 12 Aug 2025 at 22:03, Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Enable eMMC on RZ/T2H and RZ/N2H EVKs. As SDHI0 can be connected to
> either eMMC0/SD0 `SD0_EMMC` macro is added.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
> +++ b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
> @@ -10,6 +10,15 @@
> #include <dt-bindings/gpio/gpio.h>
>
> #include "r9a09g087m44.dtsi"
> +
> +/*
> + * SD0 can be connected to either eMMC (U33) or SD card slot CN21
> + * Lets by default enable the eMMC, note we need the below SW settings
> + * for eMMC.
> + * DSW5[1] = ON; DSW5[2] = ON
> + */
Both SD0 and eMMC also need DSW17[5] = OFF; DSW17[6] = ON.
> +#define SD0_EMMC 1
> +
> #include "rzt2h-n2h-evk-common.dtsi"
>
> /*
> --- a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
> +++ b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
> @@ -44,6 +63,34 @@ sci0_pins: sci0-pins {
> pinmux = <RZT2H_PORT_PINMUX(27, 4, 0x14)>,
> <RZT2H_PORT_PINMUX(27, 5, 0x14)>;
> };
> +
> +#if SD0_EMMC
> + sdhi0-emmc-iovs-hog {
> + gpio-hog;
> + gpios = <RZT2H_GPIO(2, 6) GPIO_ACTIVE_HIGH>;
> + output-high;
> + line-name = "SD0_IOVS";
> + };
> +#endif
> +
> + sdhi0_emmc_pins: sd0-emmc-group {
> + sd0-emmc-data-pins {
No need for repeated sd0-emmc-prefixes in the subnodes.
> + pinmux = <RZT2H_PORT_PINMUX(12, 2, 0x29)>, /* SD0_DATA0 */
> + <RZT2H_PORT_PINMUX(12, 3, 0x29)>, /* SD0_DATA1 */
> + <RZT2H_PORT_PINMUX(12, 4, 0x29)>, /* SD0_DATA2 */
> + <RZT2H_PORT_PINMUX(12, 5, 0x29)>, /* SD0_DATA3 */
> + <RZT2H_PORT_PINMUX(12, 6, 0x29)>, /* SD0_DATA4 */
> + <RZT2H_PORT_PINMUX(12, 7, 0x29)>, /* SD0_DATA5 */
> + <RZT2H_PORT_PINMUX(13, 0, 0x29)>, /* SD0_DATA6 */
> + <RZT2H_PORT_PINMUX(13, 1, 0x29)>; /* SD0_DATA7 */
> + };
> +
> + sd0-emmc-ctrl-pins {
> + pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
> + <RZT2H_PORT_PINMUX(12, 1, 0x29)>, /* SD0_CMD */
> + <RZT2H_PORT_PINMUX(13, 2, 0x29)>; /* SD0_RST# */
> + };
> + };
> };
The rest LGTM.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
