On 8/29/25 14:51, Wolfram Sang wrote:
Yes, I added it and it made the error go away, but still no USB. I
The drivers are not probed or you see no activity when connecting USB devices?
Sigh, I was so sure to have checked OHCI/EHCI but only EHCI was enabled :(
Checking with the schematics, I get it that only the rightmost USB-A
connectors on the carrier board are routed. Those two work fine now.
If that is to be expected, then for the whole series:
Yes, only those 2 are routed on RZ SMARC Carrier II + RZ/G3S SMARC Module.
Tested-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Thank you for doing this,
Claudiu
