Hi Prabhakar, On Mon, 18 Aug 2025 at 15:40, Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote: > On Mon, Aug 18, 2025 at 2:15 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote: > > On Tue, 12 Aug 2025 at 22:03, Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote: > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > > > > > Add USER LED0-LED8, which are available on RZ/T2H EVK. > > > > According to the schematics, only the first four are user LEDs? > > > As per [0] user manual Table 7-4, LEDs4-8 can be used as USER LEDs or > for Ethercat Slave. Since ESC is not enabled I haven't added any > #ifdefs. OK > [0] https://www.renesas.com/en/document/mat/rzt2h-evaluation-board-kit-users-manual?r=25567073 > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > > > > --- a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts > > > +++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts > Perhaps I'll have LED_FUNCTION_DEBUG for LEDs4-8 as currently they are > used as USER LEDs and function-enumerator = 4/5/6/7? That sounds fine, thanks! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
