Linux Samsung System on Chip
[Prev Page][Next Page]
- [PATCH v5 05/17] drm/exynos: exynos_dp: Remove unused &exynos_dp_device.connector, (continued)
- [PATCH v5 05/17] drm/exynos: exynos_dp: Remove unused &exynos_dp_device.connector, Damon Ding
- [PATCH v5 09/17] drm/bridge: analogix_dp: Remove unused &analogix_dp_plat_data.get_modes(), Damon Ding
- [PATCH v5 13/17] drm/rockchip: analogix_dp: Apply &analogix_dp_plat_data.attach() to attach next bridge, Damon Ding
- [PATCH v5 15/17] drm/bridge: analogix_dp: Remove panel disabling and enabling in analogix_dp_set_bridge(), Damon Ding
- [PATCH v5 14/17] drm/exynos: exynos_dp: Apply analogix_dp_finish_probe(), Damon Ding
- [PATCH v5 06/17] drm/bridge: analogix_dp: Remove redundant &analogix_dp_plat_data.skip_connector, Damon Ding
- [PATCH v5 04/17] drm/exynos: exynos_dp: Remove &exynos_dp_device.ptn_bridge, Damon Ding
- [PATCH v5 08/17] drm/bridge: analogix_dp: Move the color format check to .atomic_check() for Rockchip platforms, Damon Ding
- [PATCH v5 11/17] drm/bridge: analogix_dp: Add new API analogix_dp_finish_probe(), Damon Ding
- [PATCH v5 07/17] drm/exynos: exynos_dp: Add legacy bridge to parse the display-timings node, Damon Ding
- [PATCH v5 02/17] drm/bridge: analogix_dp: Move &drm_bridge_funcs.mode_set to &drm_bridge_funcs.atomic_enable, Damon Ding
- [PATCH v5 10/17] drm/bridge: analogix_dp: Apply drm_bridge_connector helper, Damon Ding
- [GIT PULL] samsung: drivers for v6.18, Krzysztof Kozlowski
- Re: [PATCH v4 0/5] exynos-acpm: add DVFS protocol and clock driver, Peter Griffin
- Re: [PATCH v9 3/4] PCI: qcom: Prepare for the DWC ECAM enablement,
Bjorn Helgaas
- [GIT PULL] drm-misc-next, Inki Dae
- [PATCH v1 0/3] soc: samsung: add chipid and pmu support for exynos8890,
Ivaylo Ivanov
- [PATCH 0/3] pinctrl: samsung: add Exynos9610 pinctrl support,
Alexandru Chimac
- [PATCH 0/2] soc: samsung: Add chipid support for Exynos9610,
Alexandru Chimac
- [PATCH v1 0/3] arm64: dts: exynos: add initial support for exynos8890,
Ivaylo Ivanov
- [PATCH v1 0/7] mfd: sec: add support for s2mps16 pmic,
Ivaylo Ivanov
- [PATCH v1] dt-bindings: timer: exynos4210-mct: Add samsung,exynos8890-mct compatible, Ivaylo Ivanov
- [PATCH v1 0/5] clk: samsung: introduce exynos8890 clock driver,
Ivaylo Ivanov
- [PATCH v1] dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8890, Ivaylo Ivanov
- [PATCH v1] dt-bindings: usb: samsung,exynos-dwc3 add exynos8890 compatible, Ivaylo Ivanov
- [PATCH v2 0/2] phy: exynos5-usbdrd: support the exynos8890 USBDRD,
Ivaylo Ivanov
- [PATCH v1] dt-bindings: gpu: arm,mali-midgard: add exynos8890-mali compatible, Ivaylo Ivanov
- [PATCH v1 0/2] Input: s6sa552 - add a driver for the Samsung A552,
Ivaylo Ivanov
- [PATCH v1 0/2] phy: exynos5-usbdrd: support the exynos8890 USBDRD,
Ivaylo Ivanov
- [PATCH v1] dt-bindings: serial: samsung: add samsung,exynos8890-uart compatible, Ivaylo Ivanov
- [PATCH v1] dt-bindings: i2c: exynos5: add samsung,exynos8890-hsi2c compatible, Ivaylo Ivanov
- [PATCH v1] dt-bindings: pwm: samsung: add exynos8890 compatible, Ivaylo Ivanov
- [PATCH v1 0/3] pinctrl: samsung: add exynos8890 SoC pinctrl,
Ivaylo Ivanov
- [PATCH v1 0/2] regulator: max77838: add max77838 regulator driver,
Ivaylo Ivanov
- [PATCH 0/8] clk: samsung: Introduce support for Exynos9610 clocks.,
Alexandru Chimac
- [PATCH 0/3] arm64: dts: exynos: Add initial support for Exynos9610,
Alexandru Chimac
- [PATCH v5 17/17] drm/bridge: analogix_dp: Apply panel_bridge helper, Damon Ding
- [PATCH] Documentation: Fix driver-api typos,
Ranganath V N
- [PATCH v4 00/13] Apply drm_bridge_connector and panel_bridge helper for the Analogix DP driver,
Damon Ding
- [PATCH v4 01/13] drm/bridge: analogix_dp: Formalize the struct analogix_dp_device, Damon Ding
- [PATCH v4 04/13] drm/exynos: exynos_dp: Remove &exynos_dp_device.ptn_bridge, Damon Ding
- [PATCH v4 08/13] drm/bridge: analogix_dp: Add new API analogix_dp_finish_probe(), Damon Ding
- [PATCH v4 11/13] drm/bridge: analogix_dp: Remove panel disabling and enabling in analogix_dp_set_bridge(), Damon Ding
- [PATCH v4 06/13] drm/bridge: analogix_dp: Remove redundant &analogix_dp_plat_data.skip_connector, Damon Ding
- [PATCH v4 12/13] drm/bridge: analogix_dp: Remove bridge disabing and panel unpreparing in analogix_dp_unbind(), Damon Ding
- [PATCH v4 07/13] drm/bridge: analogix_dp: Apply drm_bridge_connector helper, Damon Ding
- [PATCH v4 09/13] drm/rockchip: analogix_dp: Apply analogix_dp_finish_probe(), Damon Ding
- [PATCH v4 10/13] drm/exynos: exynos_dp: Apply analogix_dp_finish_probe(), Damon Ding
- [PATCH v4 03/13] drm/bridge: analogix_dp: Add &analogix_dp_plat_data.next_bridge, Damon Ding
- [PATCH v4 02/13] drm/bridge: analogix_dp: Move &drm_bridge_funcs.mode_set to &drm_bridge_funcs.atomic_enable, Damon Ding
- [PATCH v4 13/13] drm/bridge: analogix_dp: Apply panel_bridge helper, Damon Ding
- [PATCH v4 05/13] drm/bridge: exynos_dp: Remove unused &exynos_dp_device.connector, Damon Ding
- Re: [PATCH v4 00/13] Apply drm_bridge_connector and panel_bridge helper for the Analogix DP driver, Marek Szyprowski
[PATCH 00/21] treewide: remove unneeded 'fast_io' parameter in regmap_config,
Wolfram Sang
[PATCH v3 0/2] Add new phy_notify_state() api,
Peter Griffin
[PATCH v7 0/7] Exynos Thermal code improvement,
Anand Moon
[PATCH v7 4/7] thermal/drivers/exynos: Fixed the efuse min max value for exynos5422, Anand Moon
[PATCH v7 5/7] thermal/drivers/exynos: Remove unused base_second mapping and references, Anand Moon
[PATCH v7 3/7] thermal/drivers/exynos: Remove redundant IS_ERR() checks for clk_sec clock, Anand Moon
[PATCH v7 7/7] thermal/drivers/exynos: Refactor IRQ clear logic using SoC-specific config, Anand Moon
[PATCH v2 00/72] media: i2c: Reduce cargo-cult,
Laurent Pinchart
[PATCH v3 00/12] Add PCIe support for Tesla FSD SoC,
Shradha Todi
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
[PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate(),
Brian Masney via B4 Relay
- [PATCH 002/114] clk: at91: peripheral: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 001/114] clk: at91: peripheral: fix return value, Brian Masney via B4 Relay
- [PATCH 003/114] clk: fixed-factor: add determine_rate() ops, Brian Masney via B4 Relay
- [PATCH 005/114] clk: at91: h32mx: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 006/114] clk: at91: pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 004/114] clk: at91: audio-pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 008/114] clk: at91: sam9x60-pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 007/114] clk: at91: plldiv: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 016/114] clk: gemini: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 011/114] clk: baikal-t1: ccu-pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 014/114] clk: ep93xx: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 009/114] clk: at91: usb: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 021/114] clk: hisilicon: hi6220-stub: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 013/114] clk: cs2000-cp: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 026/114] clk: loongson1: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 024/114] clk: ingenic: x1000-cgu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 018/114] clk: hisilicon: clkdivider-hi6220: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 027/114] clk: max9485: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 019/114] clk: hisilicon: hi3660-stub: move comma from declaration of DEFINE_CLK_STUB(), Brian Masney via B4 Relay
- [PATCH 025/114] clk: lmk04832: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 017/114] clk: highbank: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 015/114] clk: fractional-divider: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 012/114] clk: cdce925: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 029/114] clk: mmp: audio: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 030/114] clk: mmp: frac: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 022/114] clk: ingenic: cgu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 010/114] clk: baikal-t1: ccu-div: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 020/114] clk: hisilicon: hi3660-stub: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 040/114] clk: scpi: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 041/114] clk: si514: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 032/114] clk: mxs: div: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 044/114] clk: si544: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 028/114] clk: milbeaut: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 023/114] clk: ingenic: jz4780-cgu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 049/114] clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 051/114] clk: spacemit: ccu_pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 031/114] clk: multiplier: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 033/114] clk: mxs: frac: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 052/114] clk: sparx5: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 047/114] clk: sophgo: cv18xx-ip: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 037/114] clk: nxp: lpc18xx-cgu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 035/114] clk: nuvoton: ma35d1-divider: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 036/114] clk: nuvoton: ma35d1-pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 038/114] clk: nxp: lpc32xx: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 039/114] clk: pistachio: pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 034/114] clk: mxs: ref: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 042/114] clk: si521xx: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 060/114] clk: tps68470: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 059/114] clk: stm32: stm32mp1: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 043/114] clk: si5341: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 050/114] clk: spacemit: ccu_mix: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 048/114] clk: sophgo: sg2042-clkgen: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 064/114] clk: x86: cgu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 062/114] clk: vt8500: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 065/114] clk: xgene: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 054/114] clk: sprd: pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 045/114] clk: si570: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 066/114] clk: xilinx: xlnx-clock-wizard: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 053/114] clk: sprd: div: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 057/114] clk: stm32f4: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 055/114] clk: st: clkgen-fsyn: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 056/114] clk: st: clkgen-pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 061/114] clk: versaclock3: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 046/114] clk: sifive: sifive-prci: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 073/114] clk: actions: owl-factor: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 058/114] clk: stm32: stm32-core: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 063/114] clk: wm831x: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 067/114] clk: xilinx: xlnx_vcu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 079/114] clk: bm1880: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 080/114] clk: cdce706: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 072/114] clk: actions: owl-divider: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 083/114] clk: microchip: core: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 078/114] clk: bcm: iproc-asiu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 086/114] clk: mvebu: armada-37xx-periph: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 074/114] clk: actions: owl-pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 071/114] clk: actions: owl-composite: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 094/114] clk: rockchip: ddr: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 070/114] clk: zynq: pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 099/114] clk: samsung: pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 068/114] clk: zynqmp: divider: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 069/114] clk: zynqmp: pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 106/114] clk: versaclock5: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 100/114] clk: sp7021: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 102/114] clk: spear: frac-synth: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 107/114] clk: versaclock7: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 096/114] clk: rockchip: pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 081/114] clk: hsdk-pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 082/114] clk: mediatek: pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 097/114] clk: rp1: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 077/114] clk: axs10x: pll_clock: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 108/114] clk: versatile: icst: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 109/114] clk: versatile: vexpress-osc: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 087/114] clk: mvebu: corediv: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 095/114] clk: rockchip: half-divider: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 088/114] clk: mvebu: cpu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 075/114] clk: apple-nco: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 085/114] clk: mvebu: ap-cpu-clk: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 101/114] clk: spear: aux-synth: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 103/114] clk: spear: gpt-synth: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 076/114] clk: axs10x: i2s_pll_clock: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 104/114] clk: spear: vco-pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 089/114] clk: mvebu: dove-divider: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 113/114] clk: sophgo: sg2042-pll: remove round_rate() in favor of determine_rate(), Brian Masney via B4 Relay
- [PATCH 093/114] clk: renesas: rzv2h-cpg: remove round_rate() in favor of determine_rate(), Brian Masney via B4 Relay
- [PATCH 105/114] clk: ux500: prcmu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 110/114] clk: visconti: pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 084/114] clk: mstar: msc313-cpupll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 098/114] clk: samsung: cpu: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 090/114] clk: qcom: alpha-pll: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 111/114] clk: divider: remove round_rate() in favor of determine_rate(), Brian Masney via B4 Relay
- [PATCH 092/114] clk: renesas: rzg2l-cpg: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 112/114] clk: scmi: remove round_rate() in favor of determine_rate(), Brian Masney via B4 Relay
- [PATCH 091/114] clk: qcom: regmap-divider: convert from round_rate() to determine_rate(), Brian Masney via B4 Relay
- [PATCH 114/114] clk: fixed-factor: drop round_rate() clk ops, Brian Masney via B4 Relay
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate(), Manivannan Sadhasivam
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate(), Brian Masney
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate(), Icenowy Zheng
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate(), Brian Masney
- Re: (subset) [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate(), Yixun Lan
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate(), Krzysztof Kozlowski
- Re: [PATCH 000/114] clk: convert drivers from deprecated round_rate() to determine_rate(), Krzysztof Kozlowski
[PATCH v3 00/76] media: Rationalise usage of v4l2_fh,
Laurent Pinchart
[PATCH v2 00/76] media: Rationalise usage of v4l2_fh,
Laurent Pinchart
[PATCH 00/21] gpiolib: fence off legacy interfaces,
Arnd Bergmann
[PATCH v1 0/3] Add clock support for CMU_M2M,
Raghav Sharma
Message not available
Message not available
[PATCH 00/10] Use SoC-specific compatible string for Samsung MFC,
Aakarsh Jain
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Message not available
Re: [PATCH 00/10] Use SoC-specific compatible string for Samsung MFC, Krzysztof Kozlowski
[PATCH v5 0/5] Increase max timeout value of s3c2410 watchdog,
Sangwook Shin
Message not available
Message not available
Message not available
Message not available
[PATCH v8] regulator: add s2dos05 regulator support,
Dzmitry Sankouski
[PATCH v5 0/6] initial usbdrd phy support for Exynosautov920 soc,
Pritam Manohar Sutar
Message not available
Message not available
Message not available
Message not available
Message not available
[PATCH v2] phy: exynos5-usbdrd: Remove error print for devm_add_action_or_reset(), Waqar Hameed
[PATCH v5 0/4] gs101: MAX77759 Fuel Gauge driver support and enablement,
Thomas Antoine via B4 Relay
[PATCH] scsi: ufs: exynos: fsd: Gate ref_clk and put UFS device in reset on suspend,
Bharat Uppal
[PATCH v7] regulator: add s2dos05 regulator support,
Dzmitry Sankouski
[PATCH 00/65] media: Rationalise usage of v4l2_fh,
Jacopo Mondi
- [PATCH 01/65] media: pci: saa7164: Store v4l2_fh pointer in file->private_data, Jacopo Mondi
- [PATCH 02/65] media: imagination: Store v4l2_fh pointer in file->private_data, Jacopo Mondi
- [PATCH 03/65] media: ti: vpe: Store v4l2_fh pointer in file->private_data, Jacopo Mondi
- [PATCH 04/65] media: usb: hdpvr: Store v4l2_fh pointer in file->private_data, Jacopo Mondi
- [PATCH 05/65] media: usb: pvrusb2: Store v4l2_fh pointer in file->private_data, Jacopo Mondi
- [PATCH 06/65] media: usb: uvcvideo: Store v4l2_fh pointer in file->private_data, Jacopo Mondi
- [PATCH 07/65] media: staging: most: Store v4l2_fh pointer in file->private_data, Jacopo Mondi
- [PATCH 08/65] media: Wrap file->private_data access with a helper function, Jacopo Mondi
- [PATCH 09/65] media: Replace file->private_data access with file_to_v4l2_fh(), Jacopo Mondi
- [PATCH 10/65] media: nvidia: tegra-vde: Replace file->private_data access, Jacopo Mondi
- [PATCH 11/65] media: Replace file->private_data access with custom functions, Jacopo Mondi
- [PATCH 12/65] media: pci: ivtv: Don't create fake v4l2_fh, Jacopo Mondi
- [PATCH 13/65] media: amphion: Make some vpu_v4l2 functions static, Jacopo Mondi
- [PATCH 14/65] media: amphion: Delete v4l2_fh synchronously in .release(), Jacopo Mondi
- [PATCH 15/65] media: visl: Drop visl_v4l2fh_to_ctx() function, Jacopo Mondi
- [PATCH 16/65] media: v4l2-fh: Move piece of documentation to correct function, Jacopo Mondi
- [PATCH 17/65] media: rcar-vin: Do not set file->private_data, Jacopo Mondi
- [PATCH 18/65] media: rzg2l-cru: Do not set file->private_data, Jacopo Mondi
- [PATCH 19/65] media: camss: Replace .open() file operation with v4l2_fh_open(), Jacopo Mondi
- [PATCH 20/65] media: camss: Remove custom .release fop(), Jacopo Mondi
- [PATCH 21/65] media: chips-media: wave5: Pass file pointer to wave5_cleanup_instance(), Jacopo Mondi
- [PATCH 22/65] media: qcom: iris: Pass file pointer to iris_v4l2_fh_(de)init(), Jacopo Mondi
- [PATCH 23/65] media: qcom: iris: Set file->private_data in iris_v4l2_fh_(de)init(), Jacopo Mondi
- [PATCH 24/65] media: qcom: iris: Drop unused argument to iris_get_inst(), Jacopo Mondi
- [PATCH 25/65] media: qcom: venus: Pass file pointer to venus_close_common(), Jacopo Mondi
- [PATCH 26/65] media: Set file->private_data in v4l2_fh_add(), Jacopo Mondi
- [PATCH 27/65] media: Reset file->private_data to NULL in v4l2_fh_del(), Jacopo Mondi
- [PATCH 28/65] media: v4l2-ioctl: Access v4l2_fh from private_data, Jacopo Mondi
- [PATCH 29/65] media: allegro: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 30/65] media: meson-ge2d: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 31/65] media: coda: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 32/65] media: wave5: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 33/65] media: m2m-deinterlace: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 34/65] media: mtk: jpeg: Access v4l2_fh from file->private_data, Jacopo Mondi
- [PATCH 35/65] media: mtk_mdp_m2m: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 36/65] media: mtk: mdp3: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 37/65] media: mtk: vcodec: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 38/65] media: tegra-vde: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 39/65] media: imx-jpeg: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 40/65] media: imx-isi: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 41/65] media: nxp: mx2: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 42/65] media: renesas: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 43/65] media: rockhip: rga: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 44/65] media: rockchip: rkvdec: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 45/65] media: exynos-gsc: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 46/65] media: exynos4-is: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 47/65] media: s3c-camif: Set queue owner using file, Jacopo Mondi
- [PATCH 48/65] media: s5p-g2d: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 49/65] media: s5p-jpeg: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 50/65] media: s5p-mfc: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 51/65] media: bdisp: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 52/65] media: st: delta: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 53/65] media: stm32: dma2d: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 54/65] media: hantro: Access v4l2_fh from file->private_data, Jacopo Mondi
- [PATCH 55/65] media: omap3isp: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 57/65] media: ivtv: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 56/65] media: cx18: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 58/65] media: zoran: Remove access to __fh, Jacopo Mondi
- [PATCH 59/65] media: usb: hdpvr: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 60/65] media: usb: uvc: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 61/65] media: staging: imx: Access v4l2_fh from file, Jacopo Mondi
- [PATCH 62/65] media: v4l2-ctrls: Move v4l2_fh retrieval after V4L2_FL_USES_V4L2_FH check, Jacopo Mondi
- [PATCH 64/65] media: staging: ipu7: isys: Don't set V4L2_FL_USES_V4L2_FH manually, Jacopo Mondi
- [PATCH 65/65] media: v4l2-ioctl: Stop passing fh pointer to ioctl handlers, Jacopo Mondi
- [PATCH 63/65] media: ipu6: isys: Don't set V4L2_FL_USES_V4L2_FH manually, Jacopo Mondi
[PATCH] arm64: dts: exynos: Add Ethernet node for E850-96 board,
Sam Protsenko
[PATCH] memory: samsung: exynos-srom: Fix of_iomap leak in exynos_srom_probe,
Zhen Ni
[PATCH v5 0/2] Samsung S2MPG10 PMIC MFD-based drivers,
André Draszik
[PATCH v2 0/5] arm64: dts: exynos2200: introduce serial busses, except spi,
Ivaylo Ivanov
[PATCH v2] dt-bindings: soc: samsung: usi: add samsung,exynos2200-usi compatible,
Ivaylo Ivanov
[PATCH] ARM: s3c/gpio: complete the conversion to new GPIO value setters,
Bartosz Golaszewski
[PATCH v2 0/2] scsi: ufs: core: interrupt handling optimisations,
André Draszik
[PATCH] clocksource/drivers/exynos_mct: Revert commits causing section mismatches,
Krzysztof Kozlowski
[PATCH v2 0/3] drm/bridge: sii9234: use extcon to detect cable attachment,
Henrik Grimler
[PATCH 1/4] dt-bindings: iio: Drop unused header includes in examples,
Krzysztof Kozlowski
[PATCH v4 0/4] Increase max timeout value of s3c2410 watchdog,
Sangwook Shin
Message not available
[Index of Archives]
[Linux Rockchip Development]
[Linux for Synopsys ARC Processors]
[Linux Actions SoC]
[Linux on Unisoc (RDA Micro) SoCs]
[Linux USB Devel]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
