Add nodes for serial_0 (UART_DBG) and serial_1 (UART_BT), which
allows using them.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
---
arch/arm64/boot/dts/exynos/exynos2200.dtsi | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos2200.dtsi b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
index bab77b442..22c6da907 100644
--- a/arch/arm64/boot/dts/exynos/exynos2200.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
@@ -336,6 +336,19 @@ pinctrl_peric1: pinctrl@10730000 {
reg = <0x10730000 0x1000>;
};
+ serial_1: serial@10840000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x10840000 0x100>;
+ clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+ <&cmu_peric1 CLK_DOUT_PERIC1_UART_BT>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart1_bus>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+
cmu_hsi0: clock-controller@10a00000 {
compatible = "samsung,exynos2200-cmu-hsi0";
reg = <0x10a00000 0x8000>;
@@ -458,6 +471,19 @@ pinctrl_peric2: pinctrl@11c30000 {
reg = <0x11c30000 0x1000>;
};
+ serial_0: serial@11c40000 {
+ compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+ reg = <0x11c40000 0x100>;
+ clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+ <&cmu_peric2 CLK_DOUT_PERIC2_UART_DBG>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&uart0_bus_single>;
+ pinctrl-names = "default";
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+
cmu_cmgp: clock-controller@14e00000 {
compatible = "samsung,exynos2200-cmu-cmgp";
reg = <0x14e00000 0x8000>;
--
2.43.0
