Linux IDE Archive

• Thread Index

• Re: [PATCH v2] ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled
  • From: Damien Le Moal
• Re: [PATCH v2 0/5] ata_eh_set_lpm() cleanups
  • From: Mikko Juhani Korhonen
• [PATCH V2] ahci: enhance error handling and resource management in ahci_init_one
  • From: Alexander Roman
• [PATCH] ahci: enhance error handling and resource management in ahci_init_one
  • From: Alexander Roman
• [PATCH] ahci: enhance error handling and resource management in ahci_init_one
  • From: Alexander Roman
• Re: ahci + intel iGPU problems
  • From: Niklas Cassel
• Re: ahci + intel iGPU problems
  • From: Jani Nikula
• Re: ahci + intel iGPU problems
  • From: Jani Nikula
• [PATCH] ahci: enhance error handling and resource management in ahci_init_one
  • From: monderasdor
• Re: [BUG] pata_jmicron - JMB368-based IDE to PCIe adapters capped at extremely slow speeds
  • From: Niklas Cassel
• [PATCH v16 42/42] dept: call dept_hardirqs_off() in local_irq_*() regardless of irq state
  • From: Byungchul Park
• [PATCH v16 39/42] dept: add module support for struct dept_event_site and dept_event_site_dep
  • From: Byungchul Park
• [PATCH v16 41/42] dept: implement a basic unit test for dept
  • From: Byungchul Park
• [PATCH v16 38/42] dept: introduce a new type of dependency tracking between multi event sites
  • From: Byungchul Park
• [PATCH v16 40/42] dept: introduce event_site() to disable event tracking if it's recoverable
  • From: Byungchul Park
• [PATCH v16 36/42] dept: assign unique dept_key to each distinct wait_for_completion() caller
  • From: Byungchul Park
• [PATCH v16 34/42] dept: make dept stop from working on debug_locks_off()
  • From: Byungchul Park
• [PATCH v16 37/42] completion, dept: introduce init_completion_dmap() API
  • From: Byungchul Park
• [PATCH v16 35/42] i2c: rename wait_for_completion callback to wait_for_completion_cb
  • From: Byungchul Park
• [PATCH v16 28/42] dept: add documentation for dept
  • From: Byungchul Park
• [PATCH v16 32/42] dept: assign unique dept_key to each distinct dma fence caller
  • From: Byungchul Park
• [PATCH v16 33/42] dept: make dept aware of lockdep_set_lock_cmp_fn() annotation
  • From: Byungchul Park
• [PATCH v16 30/42] fs/jbd2: use a weaker annotation in journal handling
  • From: Byungchul Park
• [PATCH v16 31/42] dept: assign dept map to mmu notifier invalidation synchronization
  • From: Byungchul Park
• [PATCH v16 29/42] cpu/hotplug: use a weaker annotation in AP thread
  • From: Byungchul Park
• [PATCH v16 26/42] dept: print staged wait's stacktrace on report
  • From: Byungchul Park
• [PATCH v16 27/42] locking/lockdep: prevent various lockdep assertions when lockdep_off()'ed
  • From: Byungchul Park
• [PATCH v16 25/42] dept: track PG_locked with dept
  • From: Byungchul Park
• [PATCH v16 24/42] dept: make dept able to work with an external wgen
  • From: Byungchul Park
• [PATCH v16 22/42] dept: apply timeout consideration to hashed-waitqueue wait
  • From: Byungchul Park
• [PATCH v16 18/42] dept: track timeout waits separately with a new Kconfig
  • From: Byungchul Park
• [PATCH v16 23/42] dept: apply timeout consideration to dma fence wait
  • From: Byungchul Park
• [PATCH v16 21/42] dept: apply timeout consideration to waitqueue wait
  • From: Byungchul Park
• [PATCH v16 20/42] dept: apply timeout consideration to swait
  • From: Byungchul Park
• [PATCH v16 19/42] dept: apply timeout consideration to wait_for_completion()/complete()
  • From: Byungchul Park
• [PATCH v16 17/42] dept: apply sdt_might_sleep_{start,end}() to dma fence
  • From: Byungchul Park
• [PATCH v16 13/42] dept: apply sdt_might_sleep_{start,end}() to wait_for_completion()/complete()
  • From: Byungchul Park
• [PATCH v16 16/42] dept: apply sdt_might_sleep_{start,end}() to hashed-waitqueue wait
  • From: Byungchul Park
• [PATCH v16 15/42] dept: apply sdt_might_sleep_{start,end}() to waitqueue wait
  • From: Byungchul Park
• [PATCH v16 14/42] dept: apply sdt_might_sleep_{start,end}() to swait
  • From: Byungchul Park
• [PATCH v16 06/42] dept: add proc knobs to show stats and dependency graph
  • From: Byungchul Park
• [PATCH v16 07/42] dept: distinguish each kernel context from another
  • From: Byungchul Park
• [PATCH v16 05/42] dept: tie to lockdep and IRQ tracing
  • From: Byungchul Park
• [PATCH v16 02/42] dept: implement DEPT(DEPendency Tracker)
  • From: Byungchul Park
• [PATCH v16 04/42] dept: add lock dependency tracker APIs
  • From: Byungchul Park
• [PATCH v16 12/42] dept: record the latest one out of consecutive waits of the same class
  • From: Byungchul Park
• [PATCH v16 03/42] dept: add single event dependency tracker APIs
  • From: Byungchul Park
• [PATCH v16 00/42] DEPT(DEPendency Tracker)
  • From: Byungchul Park
• [PATCH v16 01/42] llist: move llist_{head,node} definition to types.h
  • From: Byungchul Park
• [PATCH v16 09/42] arm64, dept: add support CONFIG_ARCH_HAS_DEPT_SUPPORT to arm64
  • From: Byungchul Park
• [PATCH v16 11/42] dept: add a mechanism to refill the internal memory pools on running out
  • From: Byungchul Park
• [PATCH v16 10/42] dept: distinguish each work from another
  • From: Byungchul Park
• [PATCH v16 08/42] x86_64, dept: add support CONFIG_ARCH_HAS_DEPT_SUPPORT to x86_64
  • From: Byungchul Park
• [PATCH v2] ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled
  • From: Tasos Sahanidis
• [PATCH v2] ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
  • From: Tasos Sahanidis
• Re: ahci + intel iGPU problems
  • From: Hannes Reinecke
• [BUG] pata_jmicron - JMB368-based IDE to PCIe adapters capped at extremely slow speeds
  • From: Joj Loj3
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v1 2/2] sata: eswin: Add eic7700 sata driver
  • From: kernel test robot
• ahci + intel iGPU problems
  • From: Niklas Cassel
• Re: [PATCH v15 33/43] dept: assign unique dept_key to each distinct dma fence caller
  • From: Byungchul Park
• [PATCH v2 5/5] ata: libata-eh: Keep DIPM disabled while modifying the allowed LPM states
  • From: Niklas Cassel
• [PATCH v2 4/5] ata: libata-eh: Rename no_dipm variable to be more clear
  • From: Niklas Cassel
• [PATCH v2 3/5] ata: libata-eh: Rename hipm and dipm variables
  • From: Niklas Cassel
• [PATCH v2 0/5] ata_eh_set_lpm() cleanups
  • From: Niklas Cassel
• [PATCH v2 2/5] ata: libata-eh: Add ata_eh_set_lpm() WARN_ON_ONCE
  • From: Niklas Cassel
• [PATCH v2 1/5] ata: libata-eh: Update DIPM comments to reflect reality
  • From: Niklas Cassel
• Re: [PATCH 7/7] ata: libata-eh: Always disable DIPM before calling set_lpm() callback
  • From: Damien Le Moal
• Re: [PATCH 7/7] ata: libata-eh: Always disable DIPM before calling set_lpm() callback
  • From: Niklas Cassel
• Re: [PATCH] ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled
  • From: Damien Le Moal
• Re: [PATCH 7/7] ata: libata-eh: Always disable DIPM before calling set_lpm() callback
  • From: Damien Le Moal
• Re: [PATCH 3/7] ata: libata-eh: Drop dipm variable
  • From: Damien Le Moal
• Re: [PATCH 2/7] ata: libata-eh: Add ata_eh_set_lpm() WARN_ON
  • From: Damien Le Moal
• Re: [PATCH] dt-bindings: ata: Convert arasan,cf-spear1340 to DT schema
  • From: Damien Le Moal
• Re: [PATCH] dt-bindings: ata: Convert cavium,ebt3000-compact-flash to DT schema
  • From: Damien Le Moal
• Re: [PATCH] dt-bindings: ata: Convert marvell,orion-sata to DT schema
  • From: Damien Le Moal
• Re: [PATCH] dt-bindings: ata: Convert apm,xgene-ahci to DT schema
  • From: Damien Le Moal
• Re: [PATCH] dt-bindings: ata: Convert st,ahci to DT schema
  • From: Damien Le Moal
• Re: [PATCH v1 2/2] sata: eswin: Add eic7700 sata driver
  • From: Niklas Cassel
• Re: [PATCH v1 1/2] dt-bindings: sata: eswin: Document for EIC7700 SoC
  • From: Niklas Cassel
• Re: [PATCH v1 1/2] dt-bindings: sata: eswin: Document for EIC7700 SoC
  • From: Rob Herring (Arm)
• [PATCH v1 2/2] sata: eswin: Add eic7700 sata driver
  • From: hehuan1
• [PATCH v1 1/2] dt-bindings: sata: eswin: Document for EIC7700 SoC
  • From: hehuan1
• [PATCH v1 0/2] ESWIN EIC7700 sata driver
  • From: hehuan1
• Re: [PATCH v15 02/43] dept: implement DEPT(DEPendency Tracker)
  • From: Byungchul Park
• Re: [PATCH v15 01/43] llist: move llist_{head,node} definition to types.h
  • From: Byungchul Park
• Re: [PATCH v15 01/43] llist: move llist_{head,node} definition to types.h
  • From: Waiman Long
• Re: [PATCH] dt-bindings: ata: Convert ti,dm816-ahci to DT schema
  • From: Rob Herring
• Re: [PATCH v15 02/43] dept: implement DEPT(DEPendency Tracker)
  • From: ALOK TIWARI
• [PATCH] ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
  • From: Tasos Sahanidis
• [PATCH] ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled
  • From: Tasos Sahanidis
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• [PATCH 7/7] ata: libata-eh: Always disable DIPM before calling set_lpm() callback
  • From: Niklas Cassel
• [PATCH 5/7] ata: libata-eh: Rename no_dipm variable to be more clear
  • From: Niklas Cassel
• [PATCH 0/7] ata_eh_set_lpm() cleanups
  • From: Niklas Cassel
• [PATCH 4/7] ata: libata-eh: Introduce dev_has_dipm and dev_has_hipm variables
  • From: Niklas Cassel
• [PATCH 2/7] ata: libata-eh: Add ata_eh_set_lpm() WARN_ON
  • From: Niklas Cassel
• [PATCH 1/7] ata: libata-eh: Update DIPM comments to reflect reality
  • From: Niklas Cassel
• [PATCH 6/7] ata: libata-eh: Host support has nothing to do with disabling DIPM
  • From: Niklas Cassel
• [PATCH 3/7] ata: libata-eh: Drop dipm variable
  • From: Niklas Cassel
• Re: [PATCH v15 34/43] dept: make dept aware of lockdep_set_lock_cmp_fn() annotation
  • From: kernel test robot
• Re: [PATCH v15 02/43] dept: implement DEPT(DEPendency Tracker)
  • From: kernel test robot
• Re: [PATCH v4 0/2] m68k: pata_cswarp: Add Amiga cslab ata support
  • From: Damien Le Moal
• Re: [PATCH v15 33/43] dept: assign unique dept_key to each distinct dma fence caller
  • From: kernel test robot
• Re: [PATCH v15 02/43] dept: implement DEPT(DEPendency Tracker)
  • From: kernel test robot
• Re: [PATCH v4 0/2] m68k: pata_cswarp: Add Amiga cslab ata support
  • From: Paolo Pisati
• Re: [PATCH] dt-bindings: ata: Convert ti,dm816-ahci to DT schema
  • From: Damien Le Moal
• Re: [PATCH] ata: libata: Print if port is external on boot
  • From: Damien Le Moal
• [Bug 220121] Not found
  • From: bugzilla-daemon
• [Bug 220121] Not found
  • From: bugzilla-daemon
• [Bug 220121] New: Not found
  • From: bugzilla-daemon
• Re: [PATCH v15 00/43] DEPT(DEPendency Tracker)
  • From: Byungchul Park
• Re: [PATCH v15 33/43] dept: assign unique dept_key to each distinct dma fence caller
  • From: kernel test robot
• Re: [PATCH] dt-bindings: ata: Convert ti,dm816-ahci to DT schema
  • From: Bartosz Golaszewski
• [PATCH v15 41/43] dept: introduce event_site() to disable event tracking if it's recoverable
  • From: Byungchul Park
• [PATCH v15 40/43] dept: add module support for struct dept_event_site and dept_event_site_dep
  • From: Byungchul Park
• [PATCH v15 36/43] i2c: rename wait_for_completion callback to wait_for_completion_cb
  • From: Byungchul Park
• [PATCH v15 37/43] dept: assign unique dept_key to each distinct wait_for_completion() caller
  • From: Byungchul Park
• [PATCH v15 33/43] dept: assign unique dept_key to each distinct dma fence caller
  • From: Byungchul Park
• [PATCH v15 42/43] dept: implement a basic unit test for dept
  • From: Byungchul Park
• [PATCH v15 43/43] dept: call dept_hardirqs_off() in local_irq_*() regardless of irq state
  • From: Byungchul Park
• [PATCH v15 38/43] completion, dept: introduce init_completion_dmap() API
  • From: Byungchul Park
• [PATCH v15 39/43] dept: introduce a new type of dependency tracking between multi event sites
  • From: Byungchul Park
• [PATCH v15 27/43] locking/lockdep: prevent various lockdep assertions when lockdep_off()'ed
  • From: Byungchul Park
• [PATCH v15 34/43] dept: make dept aware of lockdep_set_lock_cmp_fn() annotation
  • From: Byungchul Park
• [PATCH v15 35/43] dept: make dept stop from working on debug_locks_off()
  • From: Byungchul Park
• [PATCH v15 32/43] dept: assign dept map to mmu notifier invalidation synchronization
  • From: Byungchul Park
• [PATCH v15 29/43] dept: add documentation for dept
  • From: Byungchul Park
• [PATCH v15 31/43] fs/jbd2: use a weaker annotation in journal handling
  • From: Byungchul Park
• [PATCH v15 24/43] dept: make dept able to work with an external wgen
  • From: Byungchul Park
• [PATCH v15 23/43] dept: apply timeout consideration to dma fence wait
  • From: Byungchul Park
• [PATCH v15 30/43] cpu/hotplug: use a weaker annotation in AP thread
  • From: Byungchul Park
• [PATCH v15 28/43] dept: suppress reports with classes that have been already reported
  • From: Byungchul Park
• [PATCH v15 25/43] dept: track PG_locked with dept
  • From: Byungchul Park
• [PATCH v15 26/43] dept: print staged wait's stacktrace on report
  • From: Byungchul Park
• [PATCH v15 21/43] dept: apply timeout consideration to waitqueue wait
  • From: Byungchul Park
• [PATCH v15 18/43] dept: track timeout waits separately with a new Kconfig
  • From: Byungchul Park
• [PATCH v15 19/43] dept: apply timeout consideration to wait_for_completion()/complete()
  • From: Byungchul Park
• [PATCH v15 22/43] dept: apply timeout consideration to hashed-waitqueue wait
  • From: Byungchul Park
• [PATCH v15 16/43] dept: apply sdt_might_sleep_{start,end}() to hashed-waitqueue wait
  • From: Byungchul Park
• [PATCH v15 14/43] dept: apply sdt_might_sleep_{start,end}() to swait
  • From: Byungchul Park
• [PATCH v15 20/43] dept: apply timeout consideration to swait
  • From: Byungchul Park
• [PATCH v15 13/43] dept: apply sdt_might_sleep_{start,end}() to wait_for_completion()/complete()
  • From: Byungchul Park
• [PATCH v15 17/43] dept: apply sdt_might_sleep_{start,end}() to dma fence
  • From: Byungchul Park
• [PATCH v15 09/43] arm64, dept: add support CONFIG_ARCH_HAS_DEPT_SUPPORT to arm64
  • From: Byungchul Park
• [PATCH v15 12/43] dept: record the latest one out of consecutive waits of the same class
  • From: Byungchul Park
• [PATCH v15 15/43] dept: apply sdt_might_sleep_{start,end}() to waitqueue wait
  • From: Byungchul Park
• [PATCH v15 11/43] dept: add a mechanism to refill the internal memory pools on running out
  • From: Byungchul Park
• [PATCH v15 08/43] x86_64, dept: add support CONFIG_ARCH_HAS_DEPT_SUPPORT to x86_64
  • From: Byungchul Park
• [PATCH v15 05/43] dept: tie to lockdep and IRQ tracing
  • From: Byungchul Park
• [PATCH v15 07/43] dept: distinguish each kernel context from another
  • From: Byungchul Park
• [PATCH v15 10/43] dept: distinguish each work from another
  • From: Byungchul Park
• [PATCH v15 04/43] dept: add lock dependency tracker APIs
  • From: Byungchul Park
• [PATCH v15 06/43] dept: add proc knobs to show stats and dependency graph
  • From: Byungchul Park
• [PATCH v15 02/43] dept: implement DEPT(DEPendency Tracker)
  • From: Byungchul Park
• [PATCH v15 03/43] dept: add single event dependency tracker APIs
  • From: Byungchul Park
• [PATCH v15 00/43] DEPT(DEPendency Tracker)
  • From: Byungchul Park
• [PATCH v15 01/43] llist: move llist_{head,node} definition to types.h
  • From: Byungchul Park
• Re: [PATCH] dt-bindings: ata: Convert marvell,orion-sata to DT schema
  • From: Andrew Lunn
• [PATCH] dt-bindings: ata: Convert arasan,cf-spear1340 to DT schema
  • From: Rob Herring (Arm)
• [PATCH] dt-bindings: ata: Convert marvell,orion-sata to DT schema
  • From: Rob Herring (Arm)
• [PATCH] dt-bindings: ata: Convert cavium,ebt3000-compact-flash to DT schema
  • From: Rob Herring (Arm)
• [PATCH] dt-bindings: ata: Convert apm,xgene-ahci to DT schema
  • From: Rob Herring (Arm)
• [PATCH] dt-bindings: ata: Convert st,ahci to DT schema
  • From: Rob Herring (Arm)
• [PATCH] dt-bindings: ata: Convert ti,dm816-ahci to DT schema
  • From: Rob Herring (Arm)
• [no subject]
  • From: Unknown
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• [PATCH] ata: libata: Print if port is external on boot
  • From: Niklas Cassel
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Ioannis Barkas
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v7 08/19] scsi: detect support for command duration limits
  • From: Damien Le Moal
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mario Limonciello
• Re: [PATCH v7 08/19] scsi: detect support for command duration limits
  • From: Mira Limbeck
• Re: Multi-LUN ATAPI devices (Panasonic PD)
  • From: Damien Le Moal
• Multi-LUN ATAPI devices (Panasonic PD)
  • From: Phil Pemberton
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Damien Le Moal
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Damien Le Moal
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Damien Le Moal
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Ioannis Barkas
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• [no subject]
  • From: Unknown
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Damien Le Moal
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Damien Le Moal
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Ioannis Barkas
• Re: [PATCH v7 08/19] scsi: detect support for command duration limits
  • From: Damien Le Moal
• Re: [PATCH v7 08/19] scsi: detect support for command duration limits
  • From: Friedrich Weber
• Re: [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• Re: (subset) [PATCH 0/2] RK3576 SATA Enablement
  • From: Heiko Stuebner
• [PATCH v4] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Korhonen
• Re: [PATCH v3] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Damien Le Moal
• Re: (subset) [PATCH 0/2] RK3576 SATA Enablement
  • From: Niklas Cassel
• Re: [PATCH 1/2] dt-bindings: ata: rockchip-dwc-ahci: add RK3576 compatible
  • From: Krzysztof Kozlowski
• Re: [PATCH v3] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• Re: [PATCH v3] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Niklas Cassel
• Re: [GIT PULL] ata fixes for 6.15-rc4
  • From: pr-tracker-bot
• [GIT PULL] ata fixes for 6.15-rc4
  • From: Damien Le Moal
• [PATCH v3] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• Re: [PATCH 1/2] dt-bindings: ata: rockchip-dwc-ahci: add RK3576 compatible
  • From: Niklas Cassel
• Re: [PATCH v3] ata: libata-scsi: Do not set the INFORMATION field twice for ATA PT
  • From: Damien Le Moal
• Re: [PATCH v2] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Damien Le Moal
• [PATCH v2] ata: libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drives
  • From: Mikko Juhani Korhonen
• [PATCH 2/2] arm64: dts: rockchip: add SATA nodes to RK3576
  • From: Nicolas Frattaroli
• [PATCH 1/2] dt-bindings: ata: rockchip-dwc-ahci: add RK3576 compatible
  • From: Nicolas Frattaroli
• [PATCH 0/2] RK3576 SATA Enablement
  • From: Nicolas Frattaroli
• Re: [PATCH v3] ata: libata-scsi: Do not set the INFORMATION field twice for ATA PT
  • From: Niklas Cassel
• Re: [PATCH][next] ata: sata_sx4: Fix spelling mistake "parttern" -> "pattern"
  • From: Damien Le Moal
• Re: [PATCH] libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drive
  • From: Damien Le Moal
• [PATCH] libata: disable LPM for WDC WD20EFAX-68FB5N0 hard drive
  • From: Mikko Juhani Korhonen
• [PATCH v3] ata: libata-scsi: Do not set the INFORMATION field twice for ATA PT
  • From: Igor Pylypiv
• [PATCH][next] ata: sata_sx4: Fix spelling mistake "parttern" -> "pattern"
  • From: Colin Ian King
• Re: [PATCH v3 0/4] CDL Feature control improvements
  • From: Martin K. Petersen
• Re: [PATCH v3 0/3] Successful NCQ commands sense_valid cleanups/fixes
  • From: Damien Le Moal
• Re: [PATCH v3 1/4] ata: libata-scsi: Fix ata_mselect_control_ata_feature() return type
  • From: Igor Pylypiv
• [PATCH v3 4/4] scsi: Improve CDL control
  • From: Damien Le Moal
• [PATCH v3 3/4] ata: libata-scsi: Improve CDL control
  • From: Damien Le Moal
• [PATCH v3 2/4] ata: libata-scsi: Fix ata_msense_control_ata_feature()
  • From: Damien Le Moal
• [PATCH v3 1/4] ata: libata-scsi: Fix ata_mselect_control_ata_feature() return type
  • From: Damien Le Moal
• [PATCH v3 0/4] CDL Feature control improvements
  • From: Damien Le Moal
• Re: [PATCH v2 2/5] ata: libata-scsi: Fail MODE SELECT for unsupported mode pages
  • From: Damien Le Moal
• Re: [PATCH v2 2/5] ata: libata-scsi: Fail MODE SELECT for unsupported mode pages
  • From: Niklas Cassel
• Re: [PATCH v2 2/5] ata: libata-scsi: Fail MODE SELECT for unsupported mode pages
  • From: Damien Le Moal
• Re: [PATCH v2 2/5] ata: libata-scsi: Fail MODE SELECT for unsupported mode pages
  • From: Niklas Cassel
• Re: [PATCH v2 1/5] ata: libata-scsi: Fix ata_mselect_control_ata_feature() return type
  • From: Niklas Cassel
• [PATCH v2 5/5] scsi: Improve CDL control
  • From: Damien Le Moal
• [PATCH v2 4/5] ata: libata-scsi: Improve CDL control
  • From: Damien Le Moal
• [PATCH v2 3/5] ata: libata-scsi: Fix ata_msense_control_ata_feature()
  • From: Damien Le Moal
• [PATCH v2 1/5] ata: libata-scsi: Fix ata_mselect_control_ata_feature() return type
  • From: Damien Le Moal
• [PATCH v2 0/5] CDL Feature control improvements
  • From: Damien Le Moal
• [PATCH v2 2/5] ata: libata-scsi: Fail MODE SELECT for unsupported mode pages
  • From: Damien Le Moal
• Re: [PATCH 1/3] ata: libata-scsi: Fix ata_msense_control_ata_feature()
  • From: Damien Le Moal
• Re: [PATCH 1/3] ata: libata-scsi: Fix ata_msense_control_ata_feature()
  • From: Damien Le Moal
• Re: [PATCH 3/3] scsi: Improve CDL control
  • From: Igor Pylypiv
• Re: [PATCH 2/3] ata: libata-scsi: Improve CDL control
  • From: Igor Pylypiv
• Re: [PATCH 1/3] ata: libata-scsi: Fix ata_msense_control_ata_feature()
  • From: Igor Pylypiv
• Re: [GIT PULL] ata fixes for 6.15-rc3
  • From: pr-tracker-bot
• [GIT PULL] ata fixes for 6.15-rc3
  • From: Damien Le Moal
• Re: [RFC PATCH v1 13/15] x86/msr: Use the alternatives mechanism to read MSR
  • From: Xin Li
• Re: [PATCH 3/3] scsi: Improve CDL control
  • From: Damien Le Moal
• Re: [PATCH 3/3] scsi: Improve CDL control
  • From: Igor Pylypiv
• Re: [PATCH v3 0/3] Successful NCQ commands sense_valid cleanups/fixes
  • From: Damien Le Moal
• Re: [PATCH 3/3] scsi: Improve CDL control
  • From: Niklas Cassel
• Re: [PATCH 2/3] ata: libata-scsi: Improve CDL control
  • From: Niklas Cassel
• Re: [PATCH 1/3] ata: libata-scsi: Fix ata_msense_control_ata_feature()
  • From: Niklas Cassel
• [PATCH v3 2/3] ata: libata-sata: Simplify sense_valid fetching
  • From: Niklas Cassel
• [PATCH v3 3/3] ata: libata-sata: Use BIT() macro to convert tag to bit field
  • From: Niklas Cassel
• [PATCH v3 1/3] ata: libata-sata: Save all fields from sense data descriptor
  • From: Niklas Cassel
• [PATCH v3 0/3] Successful NCQ commands sense_valid cleanups/fixes
  • From: Niklas Cassel
• Re: [PATCH v2 3/3] ata: libata-sata: Use BIT() macro
  • From: Niklas Cassel
• [PATCH 1/3] ata: libata-scsi: Fix ata_msense_control_ata_feature()
  • From: Damien Le Moal
• [PATCH 3/3] scsi: Improve CDL control
  • From: Damien Le Moal
• [PATCH 2/3] ata: libata-scsi: Improve CDL control
  • From: Damien Le Moal
• [PATCH 0/3] CDL Feature control improvements
  • From: Damien Le Moal
• Re: [PATCH v2 1/3] ata: libata-sata: Save all fields from sense data descriptor
  • From: Damien Le Moal
• Re: [PATCH v2 3/3] ata: libata-sata: Use BIT() macro
  • From: Damien Le Moal
• Re: [PATCH v2 3/3] ata: libata-sata: Use BIT() macro
  • From: Igor Pylypiv
• Re: [PATCH v2 2/3] ata: libata-sata: Simplify sense_valid fetching
  • From: Igor Pylypiv
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: H. Peter Anvin
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Xin Li
• Re: [PATCH v2 3/3] ata: libata-sata: Use BIT() macro
  • From: Hannes Reinecke
• Re: [PATCH 2/2] ata: libata-sata: Simplify sense_valid fetching
  • From: Niklas Cassel
• [PATCH v2 2/3] ata: libata-sata: Simplify sense_valid fetching
  • From: Niklas Cassel
• [PATCH v2 1/3] ata: libata-sata: Save all fields from sense data descriptor
  • From: Niklas Cassel
• [PATCH v2 0/3] Successful NCQ commands sense_valid cleanups/fixes
  • From: Niklas Cassel
• [PATCH v2 3/3] ata: libata-sata: Use BIT() macro
  • From: Niklas Cassel
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: H. Peter Anvin
• Re: [PATCH 2/2] ata: libata-sata: Simplify sense_valid fetching
  • From: Hannes Reinecke
• Re: [PATCH 1/2] ata: libata-sata: Save all fields from sense data descriptor
  • From: Hannes Reinecke
• Re: [PATCH 2/2] ata: libata-sata: Simplify sense_valid fetching
  • From: Igor Pylypiv
• Re: [PATCH 1/2] ata: libata-sata: Save all fields from sense data descriptor
  • From: Igor Pylypiv
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Xin Li
• Re: [RFC PATCH v1 13/15] x86/msr: Use the alternatives mechanism to read MSR
  • From: Francesco Lavra
• Re: [PATCH v2] ata: libata-core: Simplify ata_print_version_once
  • From: Damien Le Moal
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: H. Peter Anvin
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Xin Li
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Xin Li
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Jim Mattson
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: H. Peter Anvin
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Xin Li
• Re: [GIT PULL] ata fixes for 6.15-rc2
  • From: pr-tracker-bot
• [PATCH 2/2] ata: libata-sata: Simplify sense_valid fetching
  • From: Niklas Cassel
• [PATCH 1/2] ata: libata-sata: Save all fields from sense data descriptor
  • From: Niklas Cassel
• Re: [PATCH v2] ata: libata-sata: Use LBA from sense data descriptor
  • From: Niklas Cassel
• [PATCH v2] ata: libata-core: Simplify ata_print_version_once
  • From: Heiner Kallweit
• [GIT PULL] ata fixes for 6.15-rc2
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-core: Simplify ata_print_version_once
  • From: Heiner Kallweit
• Re: [PATCH v2] ata: libata-sata: Use LBA from sense data descriptor
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-core: Simplify ata_print_version_once
  • From: Damien Le Moal
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Sean Christopherson
• [PATCH] ata: libata-core: Simplify ata_print_version_once
  • From: Heiner Kallweit
• Re: [PATCH v2] ata: libata-sata: Use LBA from sense data descriptor
  • From: Igor Pylypiv
• Re: [PATCH v2] ata: libata-sata: Use LBA from sense data descriptor
  • From: Niklas Cassel
• Re: [PATCH v2] ata: libata-sata: Use LBA from sense data descriptor
  • From: Niklas Cassel
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Ingo Molnar
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Ingo Molnar
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Dave Hansen
• [PATCH] x86/msr: Standardize on 'u32' MSR indices in <asm/msr.h>
  • From: Ingo Molnar
• Re: [PATCH v2] ata: libata-sata: Use LBA from sense data descriptor
  • From: Igor Pylypiv
• [PATCH v2] ata: libata-sata: Use LBA from sense data descriptor
  • From: Niklas Cassel
• Re: [PATCH] ata: libata-sata: Use LBA from sense data descriptor
  • From: Damien Le Moal
• Re: [PATCH v3] ata: sata_sx4: Add error handling in pdc20621_i2c_read()
  • From: Damien Le Moal
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Xin Li
• [PATCH] ata: libata-sata: Use LBA from sense data descriptor
  • From: Niklas Cassel
• Re: [PATCH v3] ata: sata_sx4: Add error handling in pdc20621_i2c_read()
  • From: Niklas Cassel
• [PATCH v3] ata: sata_sx4: Add error handling in pdc20621_i2c_read()
  • From: Wentao Liang
• Re: [PATCH v2] ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
  • From: Damien Le Moal
• Re: [PATCH v2] libata: Add error handling for pdc20621_i2c_read()
  • From: Damien Le Moal
• Re: [PATCH v2] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Damien Le Moal
• Re: [PATCH v2] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Igor Pylypiv
• Re: [PATCH v2] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Niklas Cassel
• Re: [PATCH v2] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Niklas Cassel
• Re: [PATCH v2] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Niklas Cassel
• [PATCH v2] libata: Add error handling for pdc20621_i2c_read()
  • From: Wentao Liang
• Re: [PATCH v2] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Igor Pylypiv
• Re: [PATCH] dt-bindings: xilinx: Remove myself from maintainership
  • From: Rob Herring (Arm)
• [no subject]
  • From: Unknown
• Re: [PATCH v2] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Niklas Cassel
• Re: [PATCH v2] ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
  • From: Markus Elfring
• [PATCH v2] ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
  • From: Henry Martin
• Re: [PATCH v1] [ARM] pata_pxa: Fix null-ptr-deref in pxa_ata_probe()
  • From: Damien Le Moal
• Re: [PATCH v1] [ARM] pata_pxa: Fix null-ptr-deref in pxa_ata_probe()
  • From: Damien Le Moal
• Re: [PATCH] libata: Add error handling for pdc20621_i2c_read().
  • From: Damien Le Moal
• Re: [PATCH] libata: Add error handling for pdc20621_i2c_read().
  • From: Damien Le Moal
• [PATCH v2] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Igor Pylypiv
• [PATCH AUTOSEL 5.10 08/15] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 06/15] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 07/14] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 06/14] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 09/16] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 07/16] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 10/18] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 08/18] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Sasha Levin
• [PATCH AUTOSEL 6.6 12/26] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Sasha Levin
• [PATCH AUTOSEL 6.6 16/26] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Sasha Levin
• [PATCH AUTOSEL 6.12 35/47] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Sasha Levin
• [PATCH AUTOSEL 6.12 23/47] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Sasha Levin
• [PATCH AUTOSEL 6.12 29/47] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Sasha Levin
• [PATCH AUTOSEL 6.12 05/47] ata: libata-core: Add 'external' to the libata.force kernel parameter
  • From: Sasha Levin
• [PATCH AUTOSEL 6.13 29/49] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Sasha Levin
• [PATCH AUTOSEL 6.13 35/49] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Sasha Levin
• [PATCH AUTOSEL 6.13 23/49] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Sasha Levin
• [PATCH AUTOSEL 6.13 05/49] ata: libata-core: Add 'external' to the libata.force kernel parameter
  • From: Sasha Levin
• [PATCH AUTOSEL 6.14 39/54] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Sasha Levin
• [PATCH AUTOSEL 6.14 26/54] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Sasha Levin
• [PATCH AUTOSEL 6.14 32/54] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Sasha Levin
• [PATCH AUTOSEL 6.14 07/54] ata: libata-core: Add 'external' to the libata.force kernel parameter
  • From: Sasha Levin
• [PATCH] libata: Add error handling for pdc20621_i2c_read().
  • From: Wentao Liang
• Re: [PATCH] [ARM] pata_pxa: Fix null-ptr-deref in pxa_ata_probe()
  • From: Markus Elfring
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Xin Li
• Re: [PATCH] dt-bindings: xilinx: Remove myself from maintainership
  • From: Damien Le Moal
• Re: [PATCH] dt-bindings: xilinx: Remove myself from maintainership
  • From: Bartosz Golaszewski
• [PATCH] dt-bindings: xilinx: Remove myself from maintainership
  • From: Mubin Sayyed
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: H. Peter Anvin
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Xin Li
• [PATCH v1] [ARM] pata_pxa: Fix null-ptr-deref in pxa_ata_probe()
  • From: Henry Martin
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: H. Peter Anvin
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Dave Hansen
• Re: ATA WRITE DMA Timeouts and Link Reset Issues
  • From: Damien Le Moal
• Re: ATA WRITE DMA Timeouts and Link Reset Issues
  • From: Naveen Kumar P
• Re: ATA WRITE DMA Timeouts and Link Reset Issues
  • From: Damien Le Moal
• ATA WRITE DMA Timeouts and Link Reset Issues
  • From: Naveen Kumar P
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Xin Li
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Ingo Molnar
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Xin Li
• Re: [PATCH] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Igor Pylypiv
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Ingo Molnar
• Re: [PATCH] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Damien Le Moal
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Xin Li
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Xin Li
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: H. Peter Anvin
• Re: [PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw
  • From: yangxingui
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Andrew Cooper
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: H. Peter Anvin
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: H. Peter Anvin
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Andrew Cooper
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Borislav Petkov
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: H. Peter Anvin
• Re: [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Konrad Rzeszutek Wilk
• Re: [RFC PATCH v1 02/15] x86/msr: Replace __rdmsr() with native_rdmsrl()
  • From: Ingo Molnar
• Re: [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Ingo Molnar
• [RFC PATCH v1 07/15] x86/msr: Remove pmu_msr_{read,write}()
  • From: Xin Li (Intel)
• [RFC PATCH v1 05/15] x86/msr: Replace wrmsr(msr, low, 0) with wrmsrl(msr, value)
  • From: Xin Li (Intel)
• [RFC PATCH v1 01/15] x86/msr: Replace __wrmsr() with native_wrmsrl()
  • From: Xin Li (Intel)
• [RFC PATCH v1 12/15] x86/msr: Use the alternatives mechanism to write MSR
  • From: Xin Li (Intel)
• [RFC PATCH v1 03/15] x86/msr: Simplify pmu_msr_{read,write}()
  • From: Xin Li (Intel)
• [RFC PATCH v1 11/15] x86/extable: Implement EX_TYPE_FUNC_REWIND
  • From: Xin Li (Intel)
• [RFC PATCH v1 08/15] x86/cpufeatures: Add a CPU feature bit for MSR immediate form instructions
  • From: Xin Li (Intel)
• [RFC PATCH v1 10/15] KVM: VMX: Use WRMSRNS or its immediate form when available
  • From: Xin Li (Intel)
• [RFC PATCH v1 00/15] MSR refactor with new MSR instructions support
  • From: Xin Li (Intel)
• [RFC PATCH v1 15/15] x86/msr: Move the ARGS macros after the MSR read/write APIs
  • From: Xin Li (Intel)
• [RFC PATCH v1 06/15] x86/msr: Remove MSR write APIs that take the MSR value in two u32 arguments
  • From: Xin Li (Intel)
• [RFC PATCH v1 04/15] x86/msr: Let pv_cpu_ops.write_msr{_safe}() take an u64 instead of two u32
  • From: Xin Li (Intel)
• [RFC PATCH v1 13/15] x86/msr: Use the alternatives mechanism to read MSR
  • From: Xin Li (Intel)
• [RFC PATCH v1 02/15] x86/msr: Replace __rdmsr() with native_rdmsrl()
  • From: Xin Li (Intel)
• [RFC PATCH v1 14/15] x86/extable: Add support for the immediate form MSR instructions
  • From: Xin Li (Intel)
• [RFC PATCH v1 09/15] x86/opcode: Add immediate form MSR instructions to x86-opcode-map
  • From: Xin Li (Intel)
• Re: [PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw
  • From: John Garry
• [PATCH] ata: libata-scsi: Set INFORMATION sense data field consistently
  • From: Igor Pylypiv
• Re: [GIT PULL] ata changes for 6.15-rc1
  • From: pr-tracker-bot
• [GIT PULL] ata changes for 6.15-rc1
  • From: Niklas Cassel
• Re: [PATCH v3 1/2] ata: pata_cswarp: Add Amiga cslab ata support
  • From: Geert Uytterhoeven
• [PATCH v4 0/2] m68k: pata_cswarp: Add Amiga cslab ata support
  • From: Paolo Pisati
• [PATCH v4 2/2] m68k: defconfig: enable PATA_CSWARP
  • From: Paolo Pisati
• [PATCH v4 1/2] ata: pata_cswarp: Add Amiga cslab ata support
  • From: Paolo Pisati
• Re: [PATCH v3 1/2] ata: pata_cswarp: Add Amiga cslab ata support
  • From: Paolo Pisati
• Re: [PATCH v3 1/2] ata: pata_cswarp: Add Amiga cslab ata support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] m68k: amiga_defconfig: enable PATA_CSWARP
  • From: Geert Uytterhoeven
• [PATCH v3 2/2] m68k: amiga_defconfig: enable PATA_CSWARP
  • From: Paolo Pisati
• [PATCH v3 1/2] ata: pata_cswarp: Add Amiga cslab ata support
  • From: Paolo Pisati
• [PATCH v3 0/2] m68k: pata_cswarp: Add Amiga cslab ata support
  • From: Paolo Pisati
• Re: [PATCH v2 2/2] ata: pata_cswarp: Add Amiga cslab ata support
  • From: Paolo Pisati
• Re: [PATCH v2 2/2] ata: pata_cswarp: Add Amiga cslab ata support
  • From: Damien Le Moal
• Re: [PATCH v2 1/2] m68k: amiga_defconfig: enable PATA_CSWARP
  • From: Damien Le Moal
• Re: [PATCH 2/3] amiga: cslab ata support
  • From: Geert Uytterhoeven
• [PATCH v2 2/2] ata: pata_cswarp: Add Amiga cslab ata support
  • From: Paolo Pisati
• [PATCH v2 1/2] m68k: amiga_defconfig: enable PATA_CSWARP
  • From: Paolo Pisati
• [PATCH v2 0/2] m68k: pata_cswarp: Add Amiga cslab ata support
  • From: Paolo Pisati
• Re: [PATCH 2/3] amiga: cslab ata support
  • From: Paolo Pisati
• Re: [PATCH 2/3] amiga: cslab ata support
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] amiga: cslab ata support
  • From: Paolo Pisati
• Re: [PATCH 1/3] include/uapi/linux/zorro_ids.h: add more cslab warp id
  • From: Geert Uytterhoeven
• Re: REMINDER - LSF/MM/BPF: 2025: Call for Proposals
  • From: Matthew Wilcox
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: [PATCH 2/3] amiga: cslab ata support
  • From: Damien Le Moal
• Re: [PATCH v3 14/16] platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
  • From: Ilpo Järvinen
• Re: [PATCH v3 15/16] platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
  • From: Ilpo Järvinen
• [PATCH 2/3] amiga: cslab ata support
  • From: Paolo Pisati
• [PATCH 1/3] include/uapi/linux/zorro_ids.h: add more cslab warp id
  • From: Paolo Pisati
• [PATCH 0/3] m68k: amiga: CS-Lab Warp ata support (and a small zorro id refactor)
  • From: Paolo Pisati
• [PATCH 3/3] m68k: amiga_defconfig: enable PATA_CSWARP
  • From: Paolo Pisati
• Re: [GIT PULL] ata fixes for 6.14-final
  • From: pr-tracker-bot
• Re: [PATCH V4] ata: ahci: simplify init function
  • From: Niklas Cassel
• [PATCH V4] ata: ahci: simplify init function
  • From: Tomas Henzl
• [GIT PULL] ata fixes for 6.14-final
  • From: Niklas Cassel
• Re: [PATCH V4] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Niklas Cassel
• [PATCH V4] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Huacai Chen
• Re: [PATCH] ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: [PATCH V3] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Huacai Chen
• Re: [PATCH] ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs
  • From: Damien Le Moal
• Re: [PATCH] ata: libata: Fix NCQ Non-Data log not supported print
  • From: Niklas Cassel
• Re: [PATCH V3] ata: ahci: simplify init function
  • From: Niklas Cassel
• Re: [PATCH V3] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Niklas Cassel
• Re: [PATCH] ata: libata: Fix NCQ Non-Data log not supported print
  • From: Damien Le Moal
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• [PATCH] ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Mario Limonciello
• Re: [PATCH V3] ata: ahci: simplify init function
  • From: Niklas Cassel
• Re: [PATCH V3] ata: ahci: simplify init function
  • From: Tomas Henzl
• Re: [PATCH] ata: libata: Fix NCQ Non-Data log not supported print
  • From: Hannes Reinecke
• [PATCH] ata: libata: Fix NCQ Non-Data log not supported print
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Hans de Goede
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Hans de Goede
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Hans de Goede
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: [PATCH V3] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Daniel Kral
• Re: [PATCH V3] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Niklas Cassel
• Re: [PATCH] ata: libata: Return -EOPNOTSUPP instead of 1 in atapi_check_dma()
  • From: Niklas Cassel
• [PATCH V3] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Huacai Chen
• [PATCH] ata: libata: Return -EOPNOTSUPP instead of 1 in atapi_check_dma()
  • From: Huacai Chen
• Re: [PATCH V2] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Huacai Chen
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: [PATCH V2] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Niklas Cassel
• [PATCH V2] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  • From: Huacai Chen
• Re: (subset) [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Martin K. Petersen
• Re: (subset) [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Andrew Morton
• Re: (subset) [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Martin K. Petersen
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Hans de Goede
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Hans de Goede
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: [PATCH] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Niklas Cassel
• [PATCH] ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  • From: Daniel Kral
• Re: [PATCH v3 02/16] scsi: lpfc: convert timeouts to secs_to_jiffies()
  • From: Martin K. Petersen
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Eric
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Niklas Cassel
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Salvatore Bonaccorso
• Re: Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Christian Heusel
• Regression from 7627a0edef54 ("ata: ahci: Drop low power policy board type") on reboot (but not cold boot)
  • From: Salvatore Bonaccorso
• Re: ahci module throws "Internal error: synchronous external abort: 0000000096000210 [#1] SMP"
  • From: Ruben Van Boxem
• Re: [GIT PULL] ata changes for 6.14-rc5
  • From: pr-tracker-bot
• [GIT PULL] ata changes for 6.14-rc5
  • From: Niklas Cassel
• Re: [PATCH] Revert "ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives"
  • From: Niklas Cassel
• [PATCH] Revert "ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives"
  • From: Niklas Cassel
• Re: [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Carlos Maiolino
• Re: [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Mark Brown
• Re: [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Andrew Morton
• Re: (subset) [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Mark Brown
• Re: [cocci] [PATCH v3 04/16] ALSA: ac97: convert timeouts to secs_to_jiffies()
  • From: Markus Elfring
• Re: [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Mark Brown
• Re: [PATCH] ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
  • From: Niklas Cassel
• Re: [PATCH v3 06/16] rbd: convert timeouts to secs_to_jiffies()
  • From: Daniel Vacek
• Re: [PATCH v3 06/16] rbd: convert timeouts to secs_to_jiffies()
  • From: Christophe JAILLET
• Re: [PATCH v3 06/16] rbd: convert timeouts to secs_to_jiffies()
  • From: Daniel Vacek
• Re: [PATCH] ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
  • From: Damien Le Moal
• Re: [PATCH v3 08/16] ata: libata-zpodd: convert timeouts to secs_to_jiffies()
  • From: Damien Le Moal
• Re: [PATCH v3 06/16] rbd: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• Re: [PATCH v3 07/16] libceph: convert timeouts to secs_to_jiffies()
  • From: Christophe JAILLET
• Re: [PATCH v3 06/16] rbd: convert timeouts to secs_to_jiffies()
  • From: Christophe JAILLET
• Re: (subset) [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Jens Axboe
• Re: [PATCH v3 13/16] spi: spi-imx: convert timeouts to secs_to_jiffies()
  • From: Marc Kleine-Budde
• Re: [PATCH v3 08/16] ata: libata-zpodd: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 15/16] platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 16/16] RDMA/bnxt_re: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 11/16] nvme: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 12/16] spi: spi-fsl-lpspi: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 14/16] platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 13/16] spi: spi-imx: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 10/16] power: supply: da9030: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 09/16] xfs: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 08/16] ata: libata-zpodd: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 06/16] rbd: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 05/16] btrfs: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 07/16] libceph: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 04/16] ALSA: ac97: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 03/16] accel/habanalabs: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 02/16] scsi: lpfc: convert timeouts to secs_to_jiffies()
  • From: Easwar Hariharan
• [PATCH v3 00/16] Converge on using secs_to_jiffies() part two
  • From: Easwar Hariharan
• [PATCH v3 01/16] coccinelle: misc: secs_to_jiffies: Patch expressions too
  • From: Easwar Hariharan
• Re: [PATCH] ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
  • From: Marek Szyprowski
• Re: [PATCH v2] ata: libahci_platform: Do not set mask_port_map when not needed
  • From: Niklas Cassel
• [PATCH] ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
  • From: Niklas Cassel
• Re: [PATCH v2 05/12] dt-bindings: dma: Convert fsl,elo*-dma to YAML
  • From: J. Neuschäfer
• Re: [PATCH v2] ata: libahci_platform: Do not set mask_port_map when not needed
  • From: Marek Szyprowski
• Re: Samsung SSD 870 QVO LPM issues
  • From: Niklas Cassel
• Re: [PATCH] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Niklas Cassel
• Re: Zip 100 ATAPI not working, "qc timeout" and "failed to clear UNIT ATTENTION"
  • From: Niklas Cassel
• Re: Zip 100 ATAPI not working, "qc timeout" and "failed to clear UNIT ATTENTION"
  • From: Philip Pemberton
• Re: [PATCH v3] dt-bindings: ata: Convert fsl,pq-sata to YAML
  • From: Niklas Cassel
• Re: [PATCH] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Damien Le Moal
• Re: [GIT PULL] ata changes for 6.14-rc4
  • From: pr-tracker-bot
• Re: Zip 100 ATAPI not working, "qc timeout" and "failed to clear UNIT ATTENTION"
  • From: Niklas Cassel
• [PATCH] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  • From: Niklas Cassel
• [GIT PULL] ata changes for 6.14-rc4
  • From: Niklas Cassel
• Re: [PATCH v2] ata: sata_via: Use str_up_down() helper in vt6420_prereset()
  • From: Niklas Cassel
• [PATCH v3] dt-bindings: ata: Convert fsl,pq-sata to YAML
  • From: J. Neuschäfer via B4 Relay
• Re: [PATCH 0/2] arm64: zynqmp: Move firmware constants from binding to platform
  • From: Michal Simek
• [PATCH v2] ata: sata_via: Use str_up_down() helper in vt6420_prereset()
  • From: Salah Triki
• Re: [PATCH] ata: Use str_up_down() helper in vt6420_prereset()
  • From: Damien Le Moal
• [PATCH] ata: Use str_up_down() helper in vt6420_prereset()
  • From: Salah Triki
• Re: Zip 100 ATAPI not working, "qc timeout" and "failed to clear UNIT ATTENTION"
  • From: Philip Pemberton
• Re: Zip 100 ATAPI not working, "qc timeout" and "failed to clear UNIT ATTENTION"
  • From: Niklas Cassel
• Re: Zip 100 ATAPI not working, "qc timeout" and "failed to clear UNIT ATTENTION"
  • From: Niklas Cassel
• Re: Samsung SSD 870 QVO LPM issues
  • From: Niklas Cassel
• Re: [PATCH 2/2] dt-bindings: xilinx: Deprecate header with firmware constants
  • From: Vinod Koul
• Re: Zip 100 ATAPI not working, "qc timeout" and "failed to clear UNIT ATTENTION"
  • From: Philip Pemberton
• Re: [PATCH 0/2] arm64: zynqmp: Move firmware constants from binding to platform
  • From: Michal Simek
• Re: Re: [PATCH] ahci: Marvell controllers prefer DMA for ATAPI
  • From: Huacai Chen
• Re: Re: [PATCH] ahci: Marvell controllers prefer DMA for ATAPI
  • From: Niklas Cassel
• Re: [PATCH v2 12/12] dt-bindings: mtd: raw-nand-chip: Relax node name pattern
  • From: J. Neuschäfer
• Re: [PATCH v2 12/12] dt-bindings: mtd: raw-nand-chip: Relax node name pattern
  • From: Miquel Raynal
• Re: Re: [PATCH] ahci: Marvell controllers prefer DMA for ATAPI
  • From: WangYuli
• Re: [PATCH v2 11/12] dt-bindings: nand: Add fsl,elbc-fcm-nand
  • From: J. Neuschäfer
• Re: [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: J. Neuschäfer
• Re: [PATCH v2 12/12] dt-bindings: mtd: raw-nand-chip: Relax node name pattern
  • From: J. Neuschäfer
• Re: [PATCH v2 05/12] dt-bindings: dma: Convert fsl,elo*-dma to YAML
  • From: J. Neuschäfer
• Re: [PATCH v2 03/12] dt-bindings: crypto: Convert fsl,sec-2.0 to YAML
  • From: J. Neuschäfer
• Re: [PATCH 00/16] Converge on using secs_to_jiffies() part two
  • From: Easwar Hariharan
• Re: [PATCH v2 10/12] dt-bindings: memory-controllers: Add fsl,elbc-gpcm-uio
  • From: Rob Herring (Arm)
• Re: [PATCH v2 08/12] dt-bindings: spi: Convert Freescale SPI bindings to YAML
  • From: Rob Herring
• Re: [PATCH v2 05/12] dt-bindings: dma: Convert fsl,elo*-dma to YAML
  • From: Rob Herring
• Re: [PATCH v2 03/12] dt-bindings: crypto: Convert fsl,sec-2.0 to YAML
  • From: Rob Herring
• Re: (subset) [PATCH 4/9] dt-bindings: mfd: Convert fsl,mcu-mpc8349emitx binding to YAML
  • From: Lee Jones
• Re: [PATCH v2 11/12] dt-bindings: nand: Add fsl,elbc-fcm-nand
  • From: Rob Herring
• Re: [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: Rob Herring
• Re: [PATCH v2 06/12] dt-bindings: pci: Convert fsl,mpc83xx-pcie to YAML
  • From: Rob Herring
• Re: [PATCH v2 11/12] dt-bindings: nand: Add fsl,elbc-fcm-nandy
  • From: Frank Li
• Re: [PATCH v2 10/12] dt-bindings: memory-controllers: Add fsl,elbc-gpcm-uio
  • From: Frank Li
• Re: [PATCH v2 08/12] dt-bindings: spi: Convert Freescale SPI bindings to YAML
  • From: Frank Li
• Re: [PATCH v2 05/12] dt-bindings: dma: Convert fsl,elo*-dma to YAML
  • From: Frank Li
• Re: [PATCH v2 03/12] dt-bindings: crypto: Convert fsl,sec-2.0 to YAMLy
  • From: Frank Li
• Re: Samsung SSD 870 QVO LPM issues
  • From: Daniel Baumann
• Re: [PATCH v2 00/12] YAML conversion of several Freescale/PowerPC DT bindings
  • From: Mark Brown
• Re: [PATCH v2 00/12] YAML conversion of several Freescale/PowerPC DT bindings
  • From: J. Neuschäfer
• Re: [PATCH v2 00/12] YAML conversion of several Freescale/PowerPC DT bindings
  • From: Mark Brown
• Re: [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: J. Neuschäfer
• Re: Samsung SSD 870 QVO LPM issues
  • From: Niklas Cassel
• Re: [PATCH v2] ata: libahci_platform: Do not set mask_port_map when not needed
  • From: Niklas Cassel
• Re: [PATCH v2 12/12] dt-bindings: mtd: raw-nand-chip: Relax node name pattern
  • From: Miquel Raynal
• Re: [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: Crystal Wood
• Re: [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: Crystal Wood
• Re: [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: J. Neuschäfer
• Re: [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: J. Neuschäfer
• Re: [PATCH v2 06/12] dt-bindings: pci: Convert fsl,mpc83xx-pcie to YAML
  • From: J. Neuschäfer
• Re: [PATCH v2] ata: libahci_platform: Do not set mask_port_map when not needed
  • From: Josua Mayer
• Re: [PATCH v2] ata: libahci_platform: support non-consecutive port numbers
  • From: Josua Mayer
• Re: [PATCH v2 00/12] YAML conversion of several Freescale/PowerPC DT bindings
  • From: J. Neuschäfer
• Re: [PATCH v2 06/12] dt-bindings: pci: Convert fsl,mpc83xx-pcie to YAML
  • From: kernel test robot
• Re: [PATCH v2 11/12] dt-bindings: nand: Add fsl,elbc-fcm-nand
  • From: Rob Herring (Arm)
• Re: [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: Rob Herring (Arm)
• Re: [PATCH v2 06/12] dt-bindings: pci: Convert fsl,mpc83xx-pcie to YAML
  • From: Rob Herring (Arm)
• [PATCH v2] ata: libahci_platform: Do not set mask_port_map when not needed
  • From: Damien Le Moal
• Re: [PATCH v2 02/12] dt-bindings: ata: Convert fsl,pq-sata to YAML
  • From: Damien Le Moal
• Re: [PATCH v2 00/12] YAML conversion of several Freescale/PowerPC DT bindings
  • From: Mark Brown
• [PATCH v2 12/12] dt-bindings: mtd: raw-nand-chip: Relax node name pattern
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 10/12] dt-bindings: memory-controllers: Add fsl,elbc-gpcm-uio
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 09/12] dt-bindings: memory-controllers: Convert fsl,elbc to YAML
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 11/12] dt-bindings: nand: Add fsl,elbc-fcm-nand
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 08/12] dt-bindings: spi: Convert Freescale SPI bindings to YAML
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 07/12] dt-bindings: watchdog: Convert mpc8xxx-wdt to YAML
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 06/12] dt-bindings: pci: Convert fsl,mpc83xx-pcie to YAML
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 05/12] dt-bindings: dma: Convert fsl,elo*-dma to YAML
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 04/12] dt-bindings: mfd: Convert fsl,mcu-mpc8349emitx to YAML
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 02/12] dt-bindings: ata: Convert fsl,pq-sata to YAML
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 03/12] dt-bindings: crypto: Convert fsl,sec-2.0 to YAML
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 01/12] dt-bindings: powerpc: Add Freescale/NXP MPC83xx SoCs
  • From: J. Neuschäfer via B4 Relay
• [PATCH v2 00/12] YAML conversion of several Freescale/PowerPC DT bindings
  • From: J. Neuschäfer via B4 Relay
• Re: [PATCH v2] ata: libahci_platform: support non-consecutive port numbers
  • From: Klaus Kudielka
• Re: [PATCH 6/9] dt-bindings: pci: Add fsl,mpc83xx-pcie bindings
  • From: J. Neuschäfer
• Re: [PATCH] ata: libahci_platform: Do not set mask_port_map when not needed
  • From: Josua Mayer
• Re: [PATCH v2] ata: libahci_platform: support non-consecutive port numbers
  • From: Josua Mayer
• Re: [PATCH] ata: libahci_platform: Do not set mask_port_map when not needed
  • From: Niklas Cassel
• [PATCH] ata: libahci_platform: Do not set mask_port_map when not needed
  • From: Damien Le Moal
• Re: [PATCH RFC 9/9] dt-bindings: nand: Convert fsl,elbc bindings to YAML
  • From: J. Neuschäfer
• Re: [PATCH RFC 9/9] dt-bindings: nand: Convert fsl,elbc bindings to YAML
  • From: J. Neuschäfer
• Re: [PATCH RFC 9/9] dt-bindings: nand: Convert fsl,elbc bindings to YAML
  • From: J. Neuschäfer
• Re: [PATCH v2] ata: libahci_platform: support non-consecutive port numbers
  • From: Klaus Kudielka
• Re: [PATCH 6/9] dt-bindings: pci: Add fsl,mpc83xx-pcie bindings
  • From: Mukesh Kumar Savaliya
• Re: [PATCH v2] ata: libahci_platform: support non-consecutive port numbers
  • From: Damien Le Moal
• Re: [PATCH v2] ata: libahci_platform: support non-consecutive port numbers
  • From: Klaus Kudielka
• Re: [PATCH 8/9] dt-bindings: spi: Convert Freescale SPI bindings to YAML
  • From: J. Neuschäfer
• Samsung SSD 870 QVO LPM issues
  • From: Niklas Cassel
• Re: [PATCH 6/9] dt-bindings: pci: Add fsl,mpc83xx-pcie bindings
  • From: J. Neuschäfer
• Re: [PATCH 6/9] dt-bindings: pci: Add fsl,mpc83xx-pcie bindings
  • From: J. Neuschäfer
• Re: [PATCH 5/9] dt-bindings: dma: Convert fsl,elo*-dma bindings to YAML
  • From: J. Neuschäfer
• Re: [PATCH 2/2] dt-bindings: xilinx: Deprecate header with firmware constants
  • From: Jonathan Cameron
• Re: [PATCH 0/2] arm64: zynqmp: Move firmware constants from binding to platform
  • From: Conor Dooley
• Re: [PATCH 5/9] dt-bindings: dma: Convert fsl,elo*-dma bindings to YAML
  • From: J. Neuschäfer
• Re: [PATCH 06/16] rbd: convert timeouts to secs_to_jiffies()
  • From: Ilya Dryomov
• [PATCH 2/2] dt-bindings: xilinx: Deprecate header with firmware constants
  • From: Michal Simek
• [PATCH 0/2] arm64: zynqmp: Move firmware constants from binding to platform
  • From: Michal Simek
• Re: REMINDER - LSF/MM/BPF: 2025: Call for Proposals
  • From: Michal Hocko
• Re: [PATCH 0/1] Add 'external' to the libata.force kernel parameter
  • From: Niklas Cassel
• Re: [PATCH 1/1] ata: libata-core: Add 'external' to the libata.force kernel parameter
  • From: Damien Le Moal
• Re: [01/16] coccinelle: misc: secs_to_jiffies: Patch expressions too
  • From: Markus Elfring
• Re: [PATCH 01/16] coccinelle: misc: secs_to_jiffies: Patch expressions too
  • From: Easwar Hariharan
• Re: [PATCH 5/9] dt-bindings: dma: Convert fsl,elo*-dma bindings to YAML
  • From: Rob Herring