Hi,
> +&pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pciem1_pins>, <&pcie_reset_g>;
The pciem1_pins contains PCIE20_PERSTn_M1 (GPIO1_A2)
This will cause conflicts, "pinctrl-0 = <&pciem1_pins>" is enough.
[ 0.115608] rockchip-pinctrl pinctrl: not freeing pin 34 (gpio1-2) as part of deactivating group pciem1-pins - it is already used for some other setting
[ 0.191042] rockchip-pinctrl pinctrl: pin gpio1-2 already requeste by pll_gpll; cannot claim for 140000000.pcie
[ 0.191949] rockchip-pinctrl pinctrl: error -EINVAL: pin-34 (140000000.pcie)
[ 0.192570] rockchip-pinctrl pinctrl: error -EINVAL: could not request pin 34 (gpio1-2) from group pciem1-pins on device rockchip-pinctrl
> + reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
Missing supply: "vpcie3v3-supply = <&vcc_3v3>;"
> + status = "okay";
> +};
> +
Thanks,
Chukun
