[PATCH 0/5] Add USB2 PHY support for RZ/T2H and RZ/N2H SoCs

[Prabhakar <prabhakar.csengg@xxxxxxxxx>]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Hi All,

This patch series adds support for the USB2 PHY on the Renesas RZ/T2H
and RZ/N2H SoCs. The USB2 PHY driver has been updated to handle
differences in clocking, reset handling, and register configurations
specific to these SoCs.

Cheers,
Prabhakar

Lad Prabhakar (5):
  dt-bindings: phy: renesas,usb2-phy: Add RZ/T2H and RZ/N2H support
  phy: renesas: rcar-gen3-usb2: Store drvdata pointer in channel
  phy: renesas: rcar-gen3-usb2: Allow SoC-specific OBINT bits via
    phy_data
  phy: renesas: rcar-gen3-usb2: Add support for RZ/T2H SoC
  phy: renesas: rcar-gen3-usb2: Move debug print after register value is
    updated

 .../bindings/phy/renesas,usb2-phy.yaml        |  17 +++
 drivers/phy/renesas/phy-rcar-gen3-usb2.c      | 127 ++++++++++++++----
 2 files changed, 115 insertions(+), 29 deletions(-)

-- 
2.50.1