From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Relocate the debug print in rcar_gen3_enable_vbus_ctrl() to appear after
the `val` variable is assigned and updated based on the VBUS state. This
ensures that the debug log reflects the actual register value being
written, improving debugging accuracy.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index bc841982a19a..86689d0cf74a 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -209,7 +209,6 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
u32 vbus_ctrl_val = USB2_ADPCTRL_DRVVBUS;
u32 val;
- dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
if (ch->drvdata->no_adp_ctrl || ch->drvdata->vblvl_ctrl) {
if (ch->vbus)
regulator_hardware_enable(ch->vbus, vbus);
@@ -223,6 +222,7 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
val |= vbus_ctrl_val;
else
val &= ~vbus_ctrl_val;
+ dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
writel(val, usb2_base + vbus_ctrl_reg);
}
--
2.50.1
