Hi Geert,
Thanks for your review.
> -----Original Message-----
> From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Sent: Tuesday, June 17, 2025 5:11 PM
> To: John Madieu <john.madieu.xa@xxxxxxxxxxxxxx>
> Subject: Re: [PATCH v2 1/3] clk: renesas: r9a09g047: Add clock and reset
> signals for the GBETH IPs
>
> Hi John,
>
> On Wed, 11 Jun 2025 at 11:02, John Madieu <john.madieu.xa@xxxxxxxxxxxxxx>
> wrote:
> > Add clock and reset entries for the Gigabit Ethernet Interfaces (GBETH
> > 0-1) IPs found on the RZ/G3E SoC. This includes various PLLs,
> > dividers, and mux clocks needed by these two GBETH IPs.
> >
> > Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > Tested-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > Signed-off-by: John Madieu <john.madieu.xa@xxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/drivers/clk/renesas/r9a09g047-cpg.c
> > +++ b/drivers/clk/renesas/r9a09g047-cpg.c
> > @@ -85,7 +95,18 @@ static const struct clk_div_table dtable_2_64[] = {
> > {0, 0},
> > };
> >
> > +static const struct clk_div_table dtable_2_100[] = {
> > + {0, 2},
> > + {1, 10},
> > + {2, 100},
> > + {0, 0},
> > +};
> > +
> > /* Mux clock tables */
> > +static const char * const smux2_gbe0_rxclk[] = { ".plleth_gbe0",
> > +"et0_rxc_rx_clk" }; static const char * const smux2_gbe0_txclk[] = {
> > +".plleth_gbe0", "et0_txc_tx_clk" }; static const char * const
> > +smux2_gbe1_rxclk[] = { ".plleth_gbe1", "et1-rxc-rx_clk" }; static
> > +const char * const smux2_gbe1_txclk[] = { ".plleth_gbe1",
> > +"et1-txc-tx_clk" };
>
> Please use consistent naming for the external clocks (underscores vs.
> dashes). However, both differ from the similar names used on RZ/V2H and
> RZ/V2N; perhaps use the naming from the latter instead?
>
Noted.
> > static const char * const smux2_xspi_clk0[] = { ".pllcm33_div3",
> > ".pllcm33_div4" }; static const char * const smux2_xspi_clk1[] = {
> > ".smux2_xspi_clk0", ".pllcm33_div5" };
> >
>
> > @@ -214,6 +252,30 @@ static const struct rzv2h_mod_clk
> r9a09g047_mod_clks[] __initconst = {
> > BUS_MSTOP(8, BIT(4))),
> > DEF_MOD("sdhi_2_aclk", CLK_PLLDTY_ACPU_DIV4,
> 10, 14, 5, 14,
> > BUS_MSTOP(8, BIT(4))),
> > + DEF_MOD("gbeth_0_clk_tx_i", CLK_SMUX2_GBE0_TXCLK,
> 11, 8, 5, 24,
> > + BUS_MSTOP(8, BIT(5))),
> > + DEF_MOD("gbeth_0_clk_rx_i", CLK_SMUX2_GBE0_RXCLK,
> 11, 9, 5, 25,
> > + BUS_MSTOP(8, BIT(5))),
> > + DEF_MOD("gbeth_0_clk_tx_180_i", CLK_SMUX2_GBE0_TXCLK,
> 11, 10, 5, 26,
> > + BUS_MSTOP(8, BIT(5))),
> > + DEF_MOD("gbeth_0_clk_rx_180_i", CLK_SMUX2_GBE0_RXCLK,
> 11, 11, 5, 27,
> > + BUS_MSTOP(8, BIT(5))),
> > + DEF_MOD("gbeth_0_aclk_csr_i", CLK_PLLDTY_DIV8, 11, 12,
> 5, 28,
> > + BUS_MSTOP(8, BIT(5))),
> > + DEF_MOD("gbeth_0_aclk_i", CLK_PLLDTY_DIV8, 11, 13,
> 5, 29,
> > + BUS_MSTOP(8, BIT(5))),
> > + DEF_MOD("gbeth_1_clk_tx_i", CLK_SMUX2_GBE1_TXCLK,
> 11, 14, 5, 30,
> > + BUS_MSTOP(8, BIT(6))),
> > + DEF_MOD("gbeth_1_clk_rx_i", CLK_SMUX2_GBE1_RXCLK,
> 11, 15, 5, 31,
> > + BUS_MSTOP(8, BIT(6))),
> > + DEF_MOD("gbeth_1_clk_tx_180_i", CLK_SMUX2_GBE1_TXCLK,
> 12, 0, 6, 0,
>
> scripts/checkpatch.pl says:
>
> WARNING: please, no space before tabs
>
Noted.
> > + BUS_MSTOP(8, BIT(6))),
> > + DEF_MOD("gbeth_1_clk_rx_180_i", CLK_SMUX2_GBE1_RXCLK,
> 12, 1, 6, 1,
> > + BUS_MSTOP(8, BIT(6))),
> > + DEF_MOD("gbeth_1_aclk_csr_i", CLK_PLLDTY_DIV8, 12, 2,
> 6, 2,
> > + BUS_MSTOP(8, BIT(6))),
> > + DEF_MOD("gbeth_1_aclk_i", CLK_PLLDTY_DIV8, 12, 3,
> 6, 3,
> > + BUS_MSTOP(8, BIT(6))),
>
> Shouldn't all of these use DEF_MOD_MUX_EXTERNAL() instead of DEF_MOD(),
> like on RZ/V2H and RZ/V2N?
>
Do we really need to use DEF_MOD_MUX_EXTERNAL? Unlike for the RZ/V2H,
On G3E, unbind/bind works with DEF_MOD. I can however switch to
DEF_MOD_MUX_EXTERNAL for consistency if required.
Please let me know.
> > DEF_MOD("cru_0_aclk", CLK_PLLDTY_ACPU_DIV2,
> 13, 2, 6, 18,
> > BUS_MSTOP(9, BIT(4))),
> > DEF_MOD_NO_PM("cru_0_vclk", CLK_PLLVDO_CRU0, 13, 3,
> 6, 19,
>
> The rest LGTM. Note that I don't have access to the Additional Document,
> so I couldn't verify all details.
>
> Gr{oetje,eeting}s,
>
> Geert
>
Regards,
John
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
>
> In personal conversations with technical people, I call myself a hacker.
> But when I'm talking to journalists I just say "programmer" or something
> like that.
> -- Linus Torvalds
