On Wed, 07 May 2025 15:50:27 +0300, Claudiu wrote:
> Series add fixes for the Renesas USB2 PHY driver identified while
> working on the Renesas RZ/G3S USB support. These changes are
> needed for the upcomming RZ/G3S USB support (especially for the
> power management support).
>
> Series (with [1] on top) was tested on Renesas RZ/G3S with consecutive
> unbind/bind and data transfer tests before/after the unbind/bind.
>
> [...]
Applied, thanks!
[1/5] phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
commit: 54c4c58713aaff76c2422ff5750e557ab3b100d7
[2/5] phy: renesas: rcar-gen3-usb2: Move IRQ request in probe
commit: de76809f60cc938d3580bbbd5b04b7d12af6ce3a
[3/5] phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data
commit: 55a387ebb9219cbe4edfa8ba9996ccb0e7ad4932
[4/5] phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off
commit: 9ce71e85b29eb63e48e294479742e670513f03a0
[5/5] phy: renesas: rcar-gen3-usb2: Set timing registers only once
commit: 86e70849f4b2b4597ac9f7c7931f2a363774be25
Best regards,
--
~Vinod
