- Add the missing "ethernet3" alias for the Ethernet TSN port, so
U-Boot will fill its local-mac-address property based on the
"eth3addr" environment variable (if set), avoiding a random MAC
address being assigned by the OS,
- Rename the numerical Ethernet PHY label to "tsn0_phy", to avoid
future conflicts, and for consistency with the "avbN_phy" labels.
Fixes: 3d8e475bd7a724a9 ("arm64: dts: renesas: white-hawk-single: Wire-up Ethernet TSN")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
To be queued in renesas-devel for v-6.16.
arch/arm64/boot/dts/renesas/white-hawk-single.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
index 8b4d313ad173cd3b..4ddb70e525c0532e 100644
--- a/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
+++ b/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
@@ -11,6 +11,10 @@
/ {
model = "Renesas White Hawk Single board";
compatible = "renesas,white-hawk-single";
+
+ aliases {
+ ethernet3 = &tsn0;
+ };
};
&hscif0 {
@@ -53,7 +57,7 @@ &tsn0 {
pinctrl-0 = <&tsn0_pins>;
pinctrl-names = "default";
phy-mode = "rgmii";
- phy-handle = <&phy3>;
+ phy-handle = <&tsn0_phy>;
status = "okay";
mdio {
@@ -63,7 +67,7 @@ mdio {
reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
reset-post-delay-us = <4000>;
- phy3: ethernet-phy@0 {
+ tsn0_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id002b.0980",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
--
2.43.0
