Hi Geert,
Thanks for your patch.
On 2025-05-07 15:31:55 +0200, Geert Uytterhoeven wrote:
> - Add the missing "ethernet3" alias for the Ethernet TSN port, so
> U-Boot will fill its local-mac-address property based on the
> "eth3addr" environment variable (if set), avoiding a random MAC
> address being assigned by the OS,
> - Rename the numerical Ethernet PHY label to "tsn0_phy", to avoid
> future conflicts, and for consistency with the "avbN_phy" labels.
>
> Fixes: 3d8e475bd7a724a9 ("arm64: dts: renesas: white-hawk-single: Wire-up Ethernet TSN")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
> To be queued in renesas-devel for v-6.16.
>
> arch/arm64/boot/dts/renesas/white-hawk-single.dtsi | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
> index 8b4d313ad173cd3b..4ddb70e525c0532e 100644
> --- a/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
> +++ b/arch/arm64/boot/dts/renesas/white-hawk-single.dtsi
> @@ -11,6 +11,10 @@
> / {
> model = "Renesas White Hawk Single board";
> compatible = "renesas,white-hawk-single";
> +
> + aliases {
> + ethernet3 = &tsn0;
> + };
> };
>
> &hscif0 {
> @@ -53,7 +57,7 @@ &tsn0 {
> pinctrl-0 = <&tsn0_pins>;
> pinctrl-names = "default";
> phy-mode = "rgmii";
> - phy-handle = <&phy3>;
> + phy-handle = <&tsn0_phy>;
> status = "okay";
>
> mdio {
> @@ -63,7 +67,7 @@ mdio {
> reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
> reset-post-delay-us = <4000>;
>
> - phy3: ethernet-phy@0 {
> + tsn0_phy: ethernet-phy@0 {
> compatible = "ethernet-phy-id002b.0980",
> "ethernet-phy-ieee802.3-c22";
> reg = <0>;
> --
> 2.43.0
>
--
Kind Regards,
Niklas Söderlund
