On 05/08/2025 14:25, Prabhakar wrote:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Add initial support for the Renesas RZ/T2H SoC to the R-Car Gen3 USB2 PHY driver. The RZ/T2H SoC requires configuration of additional hardware-specific bits for proper VBUS level control and OTG operation. Introduce the `vblvl_ctrl` flag in the SoC-specific driver data to enable handling of VBUS level selection logic using `VBCTRL.VBLVL` bits. This is required for managing the VBUS status detection and drive logic based on SoC-specific needs. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 85 ++++++++++++++++++++++-- 1 file changed, 78 insertions(+), 7 deletions(-)
<snip> Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
