Hi Prabhakar,
On Fri, 20 Jun 2025 at 14:10, Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Introduce device tree overlays to support the eMMC (RTK0EF0186B02000BJ)
> and microSD (RTK0EF0186B01000BJ) sub-boards via the CN15 connector on the
> RZ/V2N EVK. These overlays enable SDHI0 with appropriate pinctrl settings,
> regulator configurations, and GPIO handling.
>
> Shared DTSI fragments (rzv2-evk-cn15-emmc-common.dtsi and
> rzv2-evk-cn15-sd-common.dtsi) provide reusable configurations for both
> RZ/V2N and RZ/V2H EVKs, as both support the same CN15 sub-boards.
>
> Additionally, the base board DTS is updated to define an `mmc0` alias
> pointing to `&sdhi0`, and to add a fixed 1.8V regulator node (`reg_1p8v`)
> intended for use by the optional eMMC sub-board and, in the future, the
> ADV7535 HDMI encoder (not yet enabled in the DTS).
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Thanks for your patch!
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-emmc.dtso
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree overlay for the RZ/V2N EVK with the eMMC sub-board
> + * (RTK0EF0186802000BJ) connected to the CN15 connector.
> + *
> + * Copyright (C) 2025 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#define RZV2N_PA 10
This is duplicated from r9a09g056.dtsi, but unused?
> +#define EMMC_GPIO(port, pin) RZG2L_GPIO(RZV2N_P##port, pin)
Unused?
> +
> +#include "rzv2-evk-cn15-emmc-common.dtsi"
Hence you can just have a single rzv2-evk-cn15-emmc.dtso that works
on both RZ/V2H and RZ/V2N.
> diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-sd.dtso b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-sd.dtso
> new file mode 100644
> index 000000000000..6268dda138ab
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-sd.dtso
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree overlay for the RZ/V2N EVK with the SD sub-board
> + * (RTK0EF0186B01000BJ) connected to the CN15 connector.
> + *
> + * Copyright (C) 2025 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#define RZV2N_PA 10
This is duplicated from r9a09g056.dtsi. Can we avoid that?
If not, I think we found the justification for moving these definitions
to include/dt-bindings/pinctrl/renesas,r9a09g056-pinctrl.h...
> +#define SD_GPIO(port, pin) RZG2L_GPIO(RZV2N_P##port, pin)
> +#define SD_PORT_PINMUX(b, p, f) RZG2L_PORT_PINMUX(RZV2N_P##b, p, f)
> +
> +#include "rzv2-evk-cn15-sd-common.dtsi"
> diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
> index b63ee1ff18d5..795d9f6b9651 100644
> --- a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
> +++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
> @@ -24,6 +24,7 @@ aliases {
> i2c6 = &i2c6;
> i2c7 = &i2c7;
> i2c8 = &i2c8;
> + mmc0 = &sdhi0;
While (out-of-tree) dynamic DT overlays do not support updating aliases
yet, this logically belongs in the overlay, so please move it there.
> mmc1 = &sdhi1;
> serial0 = &scif;
> };
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc-common.dtsi
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Shared DT include for the eMMC Sub Board (RTK0EF0186B02000BJ), which
> + * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs.
> + *
> + * Contains common pinctrl and SDHI0 definitions.
> + *
> + * Copyright (C) 2025 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +/plugin/;
These two directives belong in the .dtso files (and you already have
them there).
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd-common.dtsi
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Shared DT include for the microSD Sub Board (RTK0EF0186B01000BJ), which
> + * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs.
> + *
> + * Contains common pinctrl and SDHI0 definitions.
> + *
> + * Copyright (C) 2025 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +/plugin/;
Likewise.
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
> +
> +&{/} {
> + vqmmc_sdhi0: regulator-vqmmc-sdhi0 {
> + compatible = "regulator-gpio";
> + regulator-name = "SDHI0 VqmmC";
> + gpios = <&pinctrl SD_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
If you use a macro to abstract the GPIO number, please include the
bank and port number in the abstraction.
Alternatively, as both RZ/V2H and RZ/V2N use PA0, you can use
RZG2L_GPIO(10, 10) directly. That just leaves us with a desire to
express "A" instead of 10...
Note that you end up with the exact same .dtbo for RZ/V2H and RZ/V2N
again...
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + gpios-states = <0>;
> + states = <3300000 0>, <1800000 1>;
> + };
> +};
> +
> +&pinctrl {
> + sdhi0-pwr-en-hog {
> + gpio-hog;
> + gpios = <SD_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
Likewise.
> + output-high;
> + line-name = "sd0_pwr_en";
> + };
> +
> + sdhi0_pins: sd0 {
> + sd0-cd {
> + pinmux = <SD_PORT_PINMUX(A, 5, 15)>; /* SD0_CD */
Likewise.
> + };
The rest LGTM.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
