Current code may fail Gen2 retraining if Target Link Speed is set to 2.5 GT/s in Link Control and Status Register 2. Set it to 5.0 GT/s accordingly. Signed-off-by: Geraldo Nascimento <geraldogabriel@xxxxxxxxx> --- drivers/pci/controller/pcie-rockchip-host.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c index 65653218b9ab..68634ae8caaf 100644 --- a/drivers/pci/controller/pcie-rockchip-host.c +++ b/drivers/pci/controller/pcie-rockchip-host.c @@ -341,6 +341,10 @@ static int rockchip_pcie_host_init_port(struct rockchip_pcie *rockchip) * Enable retrain for gen2. This should be configured only after * gen1 finished. */ + status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_CR + PCI_EXP_LNKCTL2); + status |= FIELD_PREP(PCI_EXP_LNKCTL2_TLS, PCI_EXP_LNKCTL2_TLS_5_0GT); + rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_CR + PCI_EXP_LNKCTL2); + status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_CR + PCI_EXP_LNKCTL); status |= PCI_EXP_LNKCTL_RL; rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_CR + PCI_EXP_LNKCTL); -- 2.49.0
