On Wed, Sep 03, 2025 at 07:39:30PM +0530, Wasim Nazir wrote:
> On Wed, Sep 03, 2025 at 03:16:55PM +0300, Dmitry Baryshkov wrote:
> > On Wed, Sep 03, 2025 at 05:17:06PM +0530, Wasim Nazir wrote:
> > > From: Viken Dadhaniya <viken.dadhaniya@xxxxxxxxxxxxxxxx>
> > >
> > > Enable GPI DMA controllers (gpi_dma0, gpi_dma1, gpi_dma2) and QUPv3
> > > interfaces (qupv3_id_0, qupv3_id_2) in the device tree to support
> > > DMA and peripheral communication on the Lemans EVK platform.
> > >
> > > Signed-off-by: Viken Dadhaniya <viken.dadhaniya@xxxxxxxxxxxxxxxx>
> > > Signed-off-by: Wasim Nazir <wasim.nazir@xxxxxxxxxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/qcom/lemans-evk.dts | 20 ++++++++++++++++++++
> > > 1 file changed, 20 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > > index c60629c3369e..196c5ee0dd34 100644
> > > --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > > +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > > @@ -277,6 +277,18 @@ vreg_l8e: ldo8 {
> > > };
> > > };
> > >
> > > +&gpi_dma0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&gpi_dma1 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&gpi_dma2 {
> > > + status = "okay";
> > > +};
> > > +
> > > &i2c18 {
> > > status = "okay";
> > >
> > > @@ -367,10 +379,18 @@ &mdss0_dp1_phy {
> > > status = "okay";
> > > };
> > >
> > > +&qupv3_id_0 {
> > > + status = "okay";
> > > +};
> > > +
> > > &qupv3_id_1 {
> > > status = "okay";
> > > };
> > >
> > > +&qupv3_id_2 {
> > > + status = "okay";
> > > +};
> >
> > You've added i2c18 device in patch 1, but it could not be enabled before
> > this one because it's a part of QUP2.
>
> Thanks for pointing this, I will update it in next series.
>
Also I will try to update the clients in commit message too.
> >
> > > +
> > > &sleep_clk {
> > > clock-frequency = <32768>;
> > > };
> > >
> > > --
> > > 2.51.0
> > >
> >
> > --
> > With best wishes
> > Dmitry
>
> --
> Regards,
> Wasim
--
Regards,
Wasim
