On Wed, Sep 03, 2025 at 05:17:06PM +0530, Wasim Nazir wrote:
> From: Viken Dadhaniya <viken.dadhaniya@xxxxxxxxxxxxxxxx>
>
> Enable GPI DMA controllers (gpi_dma0, gpi_dma1, gpi_dma2) and QUPv3
> interfaces (qupv3_id_0, qupv3_id_2) in the device tree to support
> DMA and peripheral communication on the Lemans EVK platform.
>
> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@xxxxxxxxxxxxxxxx>
> Signed-off-by: Wasim Nazir <wasim.nazir@xxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/lemans-evk.dts | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> index c60629c3369e..196c5ee0dd34 100644
> --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> @@ -277,6 +277,18 @@ vreg_l8e: ldo8 {
> };
> };
>
> +&gpi_dma0 {
> + status = "okay";
> +};
> +
> +&gpi_dma1 {
> + status = "okay";
> +};
> +
> +&gpi_dma2 {
> + status = "okay";
> +};
> +
> &i2c18 {
> status = "okay";
>
> @@ -367,10 +379,18 @@ &mdss0_dp1_phy {
> status = "okay";
> };
>
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> &qupv3_id_1 {
> status = "okay";
> };
>
> +&qupv3_id_2 {
> + status = "okay";
> +};
You've added i2c18 device in patch 1, but it could not be enabled before
this one because it's a part of QUP2.
> +
> &sleep_clk {
> clock-frequency = <32768>;
> };
>
> --
> 2.51.0
>
--
With best wishes
Dmitry
