On Wed, Sep 03, 2025 at 03:16:55PM +0300, Dmitry Baryshkov wrote:
> On Wed, Sep 03, 2025 at 05:17:06PM +0530, Wasim Nazir wrote:
> > From: Viken Dadhaniya <viken.dadhaniya@xxxxxxxxxxxxxxxx>
> >
> > Enable GPI DMA controllers (gpi_dma0, gpi_dma1, gpi_dma2) and QUPv3
> > interfaces (qupv3_id_0, qupv3_id_2) in the device tree to support
> > DMA and peripheral communication on the Lemans EVK platform.
> >
> > Signed-off-by: Viken Dadhaniya <viken.dadhaniya@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Wasim Nazir <wasim.nazir@xxxxxxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/lemans-evk.dts | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > index c60629c3369e..196c5ee0dd34 100644
> > --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > @@ -277,6 +277,18 @@ vreg_l8e: ldo8 {
> > };
> > };
> >
> > +&gpi_dma0 {
> > + status = "okay";
> > +};
> > +
> > +&gpi_dma1 {
> > + status = "okay";
> > +};
> > +
> > +&gpi_dma2 {
> > + status = "okay";
> > +};
> > +
> > &i2c18 {
> > status = "okay";
> >
> > @@ -367,10 +379,18 @@ &mdss0_dp1_phy {
> > status = "okay";
> > };
> >
> > +&qupv3_id_0 {
> > + status = "okay";
> > +};
> > +
> > &qupv3_id_1 {
> > status = "okay";
> > };
> >
> > +&qupv3_id_2 {
> > + status = "okay";
> > +};
>
> You've added i2c18 device in patch 1, but it could not be enabled before
> this one because it's a part of QUP2.
Thanks for pointing this, I will update it in next series.
>
> > +
> > &sleep_clk {
> > clock-frequency = <32768>;
> > };
> >
> > --
> > 2.51.0
> >
>
> --
> With best wishes
> Dmitry
--
Regards,
Wasim
