[PATCH v2 3/4] soc: qcom: preserve CPU endianness for QMI_DATA_LEN

[Alexander Wilhelm <alexander.wilhelm@xxxxxxxxxxxx>]

To ensure correct handling of endianness in the QMI subsystem, the
QMI_DATA_LEN field used in host-side drivers remains in CPU-native byte
order. Remove unnecessary endianness conversions, considering that
QMI_DATA_LEN is always of type `u32` on the host. On the QMI wire
interface, however, its representation is variable and may use either 1 or
2 bytes.

Fixes: 3ced38da5f7d ("soc: qcom: QMI encoding/decoding for big endian")
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@xxxxxxxxxxxx>
---
 drivers/soc/qcom/qmi_encdec.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/soc/qcom/qmi_encdec.c b/drivers/soc/qcom/qmi_encdec.c
index d8575e92dbf6..01f7045e91dc 100644
--- a/drivers/soc/qcom/qmi_encdec.c
+++ b/drivers/soc/qcom/qmi_encdec.c
@@ -365,6 +365,7 @@ static int qmi_encode(const struct qmi_elem_info *ei_array, void *out_buf,
 			break;
 
 		case QMI_DATA_LEN:
+			memcpy(&data_len_value, buf_src, sizeof(u32));
 			data_len_sz = temp_ei->elem_size == sizeof(u8) ?
 					sizeof(u8) : sizeof(u16);
 			/* Check to avoid out of range buffer access */
@@ -375,13 +376,11 @@ static int qmi_encode(const struct qmi_elem_info *ei_array, void *out_buf,
 				return -ETOOSMALL;
 			}
 			if (data_len_sz == sizeof(u8)) {
-				val8 = *(u8 *)buf_src;
-				data_len_value = (u32)val8;
+				val8 = data_len_value;
 				rc = qmi_encode_basic_elem(buf_dst, &val8,
 							   1, data_len_sz);
 			} else {
-				val16 = *(u16 *)buf_src;
-				data_len_value = (u32)le16_to_cpu(val16);
+				val16 = data_len_value;
 				rc = qmi_encode_basic_elem(buf_dst, &val16,
 							   1, data_len_sz);
 			}
@@ -664,7 +663,6 @@ static int qmi_decode(const struct qmi_elem_info *ei_array, void *out_c_struct,
 	int rc;
 	u8 val8;
 	u16 val16;
-	u32 val32;
 
 	while (decoded_bytes < in_buf_len) {
 		if (dec_level >= 2 && temp_ei->data_type == QMI_EOTI)
@@ -712,8 +710,7 @@ static int qmi_decode(const struct qmi_elem_info *ei_array, void *out_c_struct,
 							   1, data_len_sz);
 				data_len_value = (u32)val16;
 			}
-			val32 = cpu_to_le32(data_len_value);
-			memcpy(buf_dst, &val32, sizeof(u32));
+			memcpy(buf_dst, &data_len_value, sizeof(u32));
 			temp_ei = temp_ei + 1;
 			buf_dst = out_c_struct + temp_ei->offset;
 			tlv_len -= data_len_sz;
-- 
2.34.1