Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx> wrote:
> This is needed for AP mode. Otherwise client sees the network, but
> can't connect to it.
>
> REG_FWHW_TXQ_CTRL+1 is set to WLAN_TXQ_RPT_EN (0x1F) in common mac
> init function (__rtw8723x_mac_init), but the value was overwritten
> from mac table later. mac_postinit is run after registers from mac
> table are set, this allows to set correct values.
>
> Tested on rtl8723cs, that reuses rtw8703b driver.
>
> Signed-off-by: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
> ---
> drivers/net/wireless/realtek/rtw88/rtw8703b.c | 1 +
> drivers/net/wireless/realtek/rtw88/rtw8723d.c | 1 +
> drivers/net/wireless/realtek/rtw88/rtw8723x.c | 9 ++++++++-
> drivers/net/wireless/realtek/rtw88/rtw8723x.h | 6 ++++++
> 4 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> index 03475af973b52..821c28d9cb5d4 100644
> --- a/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> +++ b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> @@ -1832,6 +1832,7 @@ static const struct rtw_chip_ops rtw8703b_ops = {
> .power_on = rtw_power_on,
> .power_off = rtw_power_off,
> .mac_init = rtw8723x_mac_init,
> + .mac_postinit = rtw8723x_mac_postinit,
If chips don't have this ops, please give them NULL to be clear that
we don't miss it.
Since these two patches are small, I don't mind to combine them together.
Make decision yourself.
By the way, please select rtw-next tree by [PATCH v3 rtw-next].
> .dump_fw_crash = NULL,
> .shutdown = NULL,
> .read_efuse = rtw8703b_read_efuse,
[...]
