From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
This reverts commit 4fcfcbe457349267fe048524078e8970807c1a5b.
That commit introduces a regression, when HT40 mode is enabled,
received packets are lost, this was experience with W8997 with both
SDIO-UART and SDIO-SDIO variants. From an initial investigation the
issue solves on its own after some time, but it's not clear what is
the reason. Given that this was just a performance optimization, let's
revert it till we have a better understanding of the issue and a proper
fix.
Cc: Jeff Chen <jeff.chen_1@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth issue.")
Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
---
v2: fix reverted commit sha
v1: https://lore.kernel.org/all/20250605100313.34014-1-francesco@xxxxxxxxxx/
---
drivers/net/wireless/marvell/mwifiex/11n.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c
index 738bafc3749b..66f0f5377ac1 100644
--- a/drivers/net/wireless/marvell/mwifiex/11n.c
+++ b/drivers/net/wireless/marvell/mwifiex/11n.c
@@ -403,14 +403,12 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
bss_desc->bcn_ht_oper->ht_param &
- IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) {
- chan_list->chan_scan_param[0].radio_type |=
- CHAN_BW_40MHZ << 2;
+ IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)
SET_SECONDARYCHAN(chan_list->chan_scan_param[0].
radio_type,
(bss_desc->bcn_ht_oper->ht_param &
IEEE80211_HT_PARAM_CHA_SEC_OFFSET));
- }
+
*buffer += struct_size(chan_list, chan_scan_param, 1);
ret_len += struct_size(chan_list, chan_scan_param, 1);
}
--
2.39.5
