First three patches are to support channel switch. The patch 4/5 is to
adjust EHT PHY status report for RX packets. The last patch is to correct
non-AP STA behavior under EHT 20MHz bandwidth.
Eric Huang (1):
wifi: rtw89: add EHT physts and adjust init flow accordingly
Kuan-Chung Chen (1):
wifi: rtw89: fix EHT 20MHz TX rate for non-AP STA
Zong-Zhe Yang (3):
wifi: rtw89: chan: concentrate the logic of setting/clearing chanctx
bitmap
wifi: rtw89: chan: re-config default chandef only when none is
registered
wifi: rtw89: implement channel switch support
drivers/net/wireless/realtek/rtw89/chan.c | 58 ++++++++++---
drivers/net/wireless/realtek/rtw89/chan.h | 6 ++
drivers/net/wireless/realtek/rtw89/core.c | 40 +++++++++
drivers/net/wireless/realtek/rtw89/core.h | 2 +
drivers/net/wireless/realtek/rtw89/mac80211.c | 72 +++++++++++++++
drivers/net/wireless/realtek/rtw89/phy.c | 87 ++++++++++---------
drivers/net/wireless/realtek/rtw89/phy.h | 1 +
drivers/net/wireless/realtek/rtw89/reg.h | 1 +
8 files changed, 215 insertions(+), 52 deletions(-)
--
2.25.1
