On 21/07/2025 04:30, ew kim wrote:
> Add device tree node for the abox_generic platform driver to enable
> its registration as a platform device. This node does not represent
> direct hardware resources but is necessary for driver initialization
> and platform device binding.
>
> Properties added in the device tree node:
>
> - samsung,num-pcm-playback (uint32):
> Maximum number of supported PCM playback devices.
> Here, PCM playback devices refer to ALSA PCM devices.
>
> - samsung,num-pcm-capture (uint32):
> Maximum number of supported PCM capture devices.
> Here, PCM capture devices refer to ALSA PCM devices.
>
> - samsung,num-i2s-dummy-backend (uint32):
> Maximum number of supported I2S dummy backend devices.
>
> The node is declared disabled by default in the main device tree source,
> and enabled via board-specific DTS overlays by setting status = "okay".
>
> This device tree binding document will be added under
> Documentation/devicetree/bindings/sound/samsung,exynosauto.yaml
>
> to describe the node properties and usage.
>
> Signed-off-by: ew kim <ew.kim@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts | 4 ++++
> arch/arm64/boot/dts/exynos/exynosautov920.dtsi | 10 ++++++++++
Entirely wrong order of patches.
> 2 files changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
> index a397f068ed53..a870c0b6847f 100644
> --- a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
> +++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
> @@ -86,3 +86,7 @@ &usi_0 {
> &xtcxo {
> clock-frequency = <38400000>;
> };
> +
> +&abox_generic {
> + status = "okay";
> +};
> \ No newline at end of file
?
> diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
> index 2cb8041c8a9f..4f086a7a79c8 100644
> --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
> @@ -1126,6 +1126,16 @@ timer {
> <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
> <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
> };
> +
> + abox_generic: abox_generic {
And you did not resolve any of previous comments, just sent the same v1.
NAK.
Implement and respond to feedback. Then version properly your patches.
Best regards,
Krzysztof
