Enable the debug LEDs connected via the I2C GPIO extender. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- Changes since v3: - decided on LED_FUNCTION_DEBUG after discussion with LED maintainers - dropped "keep" default since it did not work reliably with the GPIO extender and no bandwidth to debug it - rebased to linux-next .../dts/renesas/r9a06g032-rzn1d400-db.dts | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts index 2de047393652..d734a432b3ec 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts +++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/net/pcs-rzn1-miic.h> #include <dt-bindings/pinctrl/rzn1-pinctrl.h> @@ -86,7 +87,66 @@ switch-8 { debounce-interval = <20>; gpios = <&pca9698 15 GPIO_ACTIVE_LOW>; }; + }; + + leds { + compatible = "gpio-leds"; + led-dbg0 { + gpios = <&pca9698 0 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <0>; + }; + + led-dbg1 { + gpios = <&pca9698 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + }; + + led-dbg2 { + gpios = <&pca9698 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + }; + + led-dbg3 { + gpios = <&pca9698 3 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <3>; + }; + + led-dbg4 { + gpios = <&pca9698 4 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <4>; + }; + + led-dbg5 { + gpios = <&pca9698 5 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <5>; + }; + + led-dbg6 { + gpios = <&pca9698 6 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <6>; + }; + + led-dbg7 { + gpios = <&pca9698 7 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <7>; + }; }; }; -- 2.47.2