From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
The Renesas RZ/G3S SoC USB PHY HW block receives as input the USB PWRRDY
signal from the system controller. Add support for the Renesas RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
Changes in v3:
- none; this patch is new
drivers/reset/reset-rzg2l-usbphy-ctrl.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
index 016aae883b2e..98d6323e9f56 100644
--- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
+++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
@@ -97,6 +97,10 @@ static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev,
static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = {
{ .compatible = "renesas,rzg2l-usbphy-ctrl" },
+ {
+ .compatible = "renesas,r9a08g045-usbphy-ctrl",
+ .data = (void *)RZG2L_USBPHY_CTRL_PWRRDY
+ },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table);
--
2.43.0
