[PATCH 6/7] LoongArch: dts: use proper node names for GPIO based I2C busses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There shall not be a '-' before the number.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 arch/loongarch/boot/dts/loongson-2k1000.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
index 1da3beb00f0e..ddf63801eef0 100644
--- a/arch/loongarch/boot/dts/loongson-2k1000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -46,7 +46,7 @@ cpuintc: interrupt-controller {
 	};
 
 	/* i2c of the dvi eeprom edid */
-	i2c-gpio-0 {
+	i2c-gpio0 {
 		compatible = "i2c-gpio";
 		scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -57,7 +57,7 @@ i2c-gpio-0 {
 	};
 
 	/* i2c of the eeprom edid */
-	i2c-gpio-1 {
+	i2c-gpio1 {
 		compatible = "i2c-gpio";
 		scl-gpios = <&gpio0 33 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		sda-gpios = <&gpio0 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-- 
2.47.2





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux