There shall not be a '-' before the number.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index ed79ad1ae871..d0e1d8f064c4 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -64,7 +64,7 @@ wps-key {
};
/* i2c of the left SFP cage (wan) */
- i2c_sfp1: i2c-gpio-0 {
+ i2c_sfp1: i2c-gpio0 {
compatible = "i2c-gpio";
sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -74,7 +74,7 @@ i2c_sfp1: i2c-gpio-0 {
};
/* i2c of the right SFP cage (lan) */
- i2c_sfp2: i2c-gpio-1 {
+ i2c_sfp2: i2c-gpio1 {
compatible = "i2c-gpio";
sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
--
2.47.2
