[PATCH 2/2] arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable USB2.0 support

[Prabhakar <prabhakar.csengg@xxxxxxxxx>]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Enable USB2.0 support on the RZ/V2H EVK board, CN3 supports
host only operation and CN2 supports host/function operation.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 .../dts/renesas/r9a09g057h44-rzv2h-evk.dts    | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
index d6d2f689b875..f4203e7cdc6b 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
@@ -80,6 +80,15 @@ &audio_extal_clk {
 	clock-frequency = <22579200>;
 };
 
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
 &eth0 {
 	pinctrl-0 = <&eth0_pins>;
 	pinctrl-names = "default";
@@ -101,6 +110,11 @@ &gpu {
 	mali-supply = <&reg_0p8v>;
 };
 
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
@@ -195,6 +209,15 @@ phy1: ethernet-phy@1 {
 	};
 };
 
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
 &ostm0 {
 	status = "okay";
 };
@@ -303,6 +326,28 @@ sd1_cd {
 			pinmux = <RZV2H_PORT_PINMUX(9, 4, 14)>; /* SD1_CD */
 		};
 	};
+
+	usb20_pins: usb20 {
+		vbus {
+			pinmux = <RZV2H_PORT_PINMUX(9, 5, 14)>; /* VBUS */
+		};
+
+		ovc {
+			pinmux =  <RZV2H_PORT_PINMUX(9, 6, 14)>; /* OVC */
+			bias-pull-up;
+		};
+	};
+
+	usb21_pins: usb21 {
+		vbus {
+			pinmux = <RZV2H_PORT_PINMUX(6, 6, 14)>; /* VBUS */
+		};
+
+		ovc {
+			pinmux = <RZV2H_PORT_PINMUX(6, 7, 14)>; /* OVC */
+			bias-pull-up;
+		};
+	};
 };
 
 &qextal_clk {
@@ -332,6 +377,28 @@ &sdhi1 {
 	status = "okay";
 };
 
+&usb20phyrst {
+	status = "okay";
+};
+
+&usb21phyrst {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb20_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb21_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &wdt1 {
 	status = "okay";
 };
-- 
2.49.0