DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding. While re-indenting, drop
unused labels.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Changes in v2:
1. Move pwm-leds removal hunk in iqs62x.yaml to prev patch (Geert)
---
.../devicetree/bindings/mfd/iqs62x.yaml | 146 +++++++--------
.../bindings/mfd/netronix,ntxec.yaml | 24 +--
.../bindings/mfd/rohm,bd9571mwv.yaml | 46 ++---
.../bindings/mfd/x-powers,axp152.yaml | 168 +++++++++---------
4 files changed, 192 insertions(+), 192 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
index 3fc758664614..f242dd0e18fd 100644
--- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml
+++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -60,34 +60,34 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- iqs620a@44 {
- compatible = "azoteq,iqs620a";
- reg = <0x44>;
- interrupt-parent = <&gpio>;
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ iqs620a@44 {
+ compatible = "azoteq,iqs620a";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
- keys {
- compatible = "azoteq,iqs620a-keys";
+ keys {
+ compatible = "azoteq,iqs620a-keys";
- linux,keycodes = <KEY_SELECT>,
- <KEY_MENU>,
- <KEY_OK>,
- <KEY_MENU>;
+ linux,keycodes = <KEY_SELECT>,
+ <KEY_MENU>,
+ <KEY_OK>,
+ <KEY_MENU>;
- hall-switch-south {
- linux,code = <SW_LID>;
- azoteq,use-prox;
- };
- };
-
- iqs620a_pwm: pwm {
- compatible = "azoteq,iqs620a-pwm";
- #pwm-cells = <2>;
- };
+ hall-switch-south {
+ linux,code = <SW_LID>;
+ azoteq,use-prox;
+ };
};
+
+ iqs620a_pwm: pwm {
+ compatible = "azoteq,iqs620a-pwm";
+ #pwm-cells = <2>;
+ };
+ };
};
- |
@@ -96,37 +96,37 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- iqs620a@44 {
- compatible = "azoteq,iqs620a";
- reg = <0x44>;
- interrupt-parent = <&gpio>;
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ iqs620a@44 {
+ compatible = "azoteq,iqs620a";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
- firmware-name = "iqs620a_coil.bin";
+ firmware-name = "iqs620a_coil.bin";
- keys {
- compatible = "azoteq,iqs620a-keys";
+ keys {
+ compatible = "azoteq,iqs620a-keys";
- linux,keycodes = <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <KEY_MUTE>;
+ linux,keycodes = <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <KEY_MUTE>;
- hall-switch-north {
- linux,code = <SW_DOCK>;
- };
+ hall-switch-north {
+ linux,code = <SW_DOCK>;
+ };
- hall-switch-south {
- linux,code = <SW_TABLET_MODE>;
- };
- };
+ hall-switch-south {
+ linux,code = <SW_TABLET_MODE>;
+ };
};
+ };
};
- |
@@ -135,36 +135,36 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- iqs624@44 {
- compatible = "azoteq,iqs624";
- reg = <0x44>;
- interrupt-parent = <&gpio>;
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ iqs624@44 {
+ compatible = "azoteq,iqs624";
+ reg = <0x44>;
+ interrupt-parent = <&gpio>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
- keys {
- compatible = "azoteq,iqs624-keys";
+ keys {
+ compatible = "azoteq,iqs624-keys";
- linux,keycodes = <BTN_0>,
- <0>,
- <BTN_1>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <KEY_VOLUMEUP>,
- <KEY_VOLUMEDOWN>;
- };
+ linux,keycodes = <BTN_0>,
+ <0>,
+ <BTN_1>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <KEY_VOLUMEUP>,
+ <KEY_VOLUMEDOWN>;
};
+ };
};
...
diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
index 06bada577acb..37fbb953ea12 100644
--- a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
+++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
@@ -48,18 +48,18 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- ec: embedded-controller@43 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ntxec>;
+ ec: embedded-controller@43 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ntxec>;
- compatible = "netronix,ntxec";
- reg = <0x43>;
- system-power-controller;
- interrupt-parent = <&gpio4>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
- #pwm-cells = <2>;
- };
+ compatible = "netronix,ntxec";
+ reg = <0x43>;
+ system-power-controller;
+ interrupt-parent = <&gpio4>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ #pwm-cells = <2>;
+ };
};
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
index 534cf03f36bb..47611c2a982c 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
@@ -99,29 +99,29 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- pmic: pmic@30 {
- compatible = "rohm,bd9571mwv";
- reg = <0x30>;
- interrupt-parent = <&gpio2>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- rohm,ddr-backup-power = <0xf>;
- rohm,rstbmode-pulse;
+ pmic: pmic@30 {
+ compatible = "rohm,bd9571mwv";
+ reg = <0x30>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ rohm,ddr-backup-power = <0xf>;
+ rohm,rstbmode-pulse;
- regulators {
- dvfs: dvfs {
- regulator-name = "dvfs";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1030000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
+ regulators {
+ dvfs: dvfs {
+ regulator-name = "dvfs";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index 3f7661bdd202..45f015d63df1 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -316,106 +316,106 @@ additionalProperties: false
examples:
- |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
- pmic@30 {
- compatible = "x-powers,axp152";
- reg = <0x30>;
- interrupts = <0>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ pmic@30 {
+ compatible = "x-powers,axp152";
+ reg = <0x30>;
+ interrupts = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
- |
- #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
- pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <1>;
+ pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
- ac_power_supply: ac-power {
- compatible = "x-powers,axp202-ac-power-supply";
- };
+ ac_power_supply: ac-power {
+ compatible = "x-powers,axp202-ac-power-supply";
+ };
- axp_adc: adc {
- compatible = "x-powers,axp209-adc";
- #io-channel-cells = <1>;
- };
+ axp_adc: adc {
+ compatible = "x-powers,axp209-adc";
+ #io-channel-cells = <1>;
+ };
- axp_gpio: gpio {
- compatible = "x-powers,axp209-gpio";
- gpio-controller;
- #gpio-cells = <2>;
+ axp_gpio: gpio {
+ compatible = "x-powers,axp209-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
- gpio0-adc-pin {
- pins = "GPIO0";
- function = "adc";
- };
- };
+ gpio0-adc-pin {
+ pins = "GPIO0";
+ function = "adc";
+ };
+ };
- battery_power_supply: battery-power {
- compatible = "x-powers,axp209-battery-power-supply";
- };
+ battery_power_supply: battery-power {
+ compatible = "x-powers,axp209-battery-power-supply";
+ };
- regulators {
- /* Default work frequency for buck regulators */
- x-powers,dcdc-freq = <1500>;
+ regulators {
+ /* Default work frequency for buck regulators */
+ x-powers,dcdc-freq = <1500>;
- reg_dcdc2: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1450000>;
- regulator-name = "vdd-cpu";
- };
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+ };
- reg_dcdc3: dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-int-dll";
- };
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+ };
- reg_ldo1: ldo1 {
- /* LDO1 is a fixed output regulator */
- regulator-always-on;
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-name = "vdd-rtc";
- };
+ reg_ldo1: ldo1 {
+ /* LDO1 is a fixed output regulator */
+ regulator-always-on;
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-rtc";
+ };
- reg_ldo2: ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
- };
+ reg_ldo2: ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+ };
- reg_ldo3: ldo3 {
- regulator-name = "ldo3";
- };
+ reg_ldo3: ldo3 {
+ regulator-name = "ldo3";
+ };
- reg_ldo4: ldo4 {
- regulator-name = "ldo4";
- };
+ reg_ldo4: ldo4 {
+ regulator-name = "ldo4";
+ };
- reg_ldo5: ldo5 {
- regulator-name = "ldo5";
- };
- };
+ reg_ldo5: ldo5 {
+ regulator-name = "ldo5";
+ };
+ };
- usb_power_supply: usb-power {
- compatible = "x-powers,axp202-usb-power-supply";
- };
- };
- };
+ usb_power_supply: usb-power {
+ compatible = "x-powers,axp202-usb-power-supply";
+ };
+ };
+ };
--
2.45.2
