Hi Philipp, On Tue, Apr 15, 2025 at 8:51 PM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote: > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > Hi All, > > This patch series adds support for the USB2PHY Port Reset control driver > for the Renesas RZ/V2H(P) SoC. The changes include documenting the USB2PHY > Port Reset control bindings and adding the driver. > > v4->v5 > - Added Reviewed-by tag from Biju Das for patch 2/3 > - Dropped NULL check for of_device_get_match_data() in probe() > - Dropped dev_set_drvdata() in probe() > > v3->v4 > - Added Reviewed-by tag from Krzysztof Kozlowski for patch 1/3 > - Updated commit message for patch 1/3 as per review comments > > v2->v3 > - Dropped Acks from Conor and Fabrizio, due to below changes > - Renamed binding renesas,rzv2h-usb2phy-ctrl.yaml to > renesas,rzv2h-usb2phy-reset.yaml > - Renamed node name in example to reset-controller > - Renamed function names in reset-rzv2h-usb2phy.c > - Kept the reset line in asserted state during probe > - Added comment for rzv2h_init_vals[] > - Added entry in MAINTAINERS file > > v1->v2 > - Dropped binding postfix in subject line for patch 1/2 > - Moved acquiring the ctrl2 pin in deassert callback > - Updated ctrl_status_bits > > Cheers, > Prabhakar > > Lad Prabhakar (3): > dt-bindings: reset: Document RZ/V2H(P) USB2PHY reset > reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P) > MAINTAINERS: Add entry for Renesas RZ/V2H(P) USB2PHY Port Reset driver > > .../reset/renesas,rzv2h-usb2phy-reset.yaml | 56 +++++ > MAINTAINERS | 8 + > drivers/reset/Kconfig | 7 + > drivers/reset/Makefile | 1 + > drivers/reset/reset-rzv2h-usb2phy.c | 236 ++++++++++++++++++ > 5 files changed, 308 insertions(+) > create mode 100644 Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml > create mode 100644 drivers/reset/reset-rzv2h-usb2phy.c > Gentle ping for review. Cheers, Prabhakar
