RE: [PATCH v4 2/3] reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)

[Biju Das <biju.das.jz@xxxxxxxxxxxxxx>]

> -----Original Message-----
> From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Sent: 14 April 2025 14:05
> To: Prabhakar <prabhakar.csengg@xxxxxxxxx>; Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>; Rob Herring
> <robh@xxxxxxxxxx>; Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>; Geert
> Uytterhoeven <geert+renesas@xxxxxxxxx>; Magnus Damm <magnus.damm@xxxxxxxxx>
> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>; Prabhakar Mahadev Lad <prabhakar.mahadev-
> lad.rj@xxxxxxxxxxxxxx>
> Subject: RE: [PATCH v4 2/3] reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)
> 
> Hi Prabhakar,
> 
> Thanks for the patch.
> 
> > -----Original Message-----
> > From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
> > Sent: 14 April 2025 14:00
> > Subject: [PATCH v4 2/3] reset: Add USB2PHY port reset driver for
> > Renesas RZ/V2H(P)
> >
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > Implement a USB2PHY port reset driver for the Renesas RZ/V2H(P) SoC.
> > Enable control of USB2.0 PHY reset and power-down operations,
> > including assert and deassert functionalities for the PHY.
> >
> > Leverage device tree (OF) data to support future SoCs with similar
> > USB2PHY hardware but varying register configurations. Define
> > initialization values and control register settings to ensure flexibility for upcoming platforms.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> >  drivers/reset/Kconfig               |   7 +
> >  drivers/reset/Makefile              |   1 +
> >  drivers/reset/reset-rzv2h-usb2phy.c | 241
> > ++++++++++++++++++++++++++++
> >  3 files changed, 249 insertions(+)
> >  create mode 100644 drivers/reset/reset-rzv2h-usb2phy.c
> >
> > diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index
> > 99f6f9784e68..6c7dbd8ca580 100644
> > --- a/drivers/reset/Kconfig
> > +++ b/drivers/reset/Kconfig
> > @@ -225,6 +225,13 @@ config RESET_RZG2L_USBPHY_CTRL
> >  	  Support for USBPHY Control found on RZ/G2L family. It mainly
> >  	  controls reset and power down of the USB/PHY.
> >
> > +config RESET_RZV2H_USB2PHY
> > +	tristate "Renesas RZ/V2H(P) (and similar SoCs) USB2PHY Reset driver"
> > +	depends on ARCH_RENESAS || COMPILE_TEST
> > +	help
> > +	  Support for USB2PHY Port reset Control found on the RZ/V2H(P) SoC
> > +	  (and similar SoCs).
> > +
> >  config RESET_SCMI
> >  	tristate "Reset driver controlled via ARM SCMI interface"
> >  	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST diff --git
> > a/drivers/reset/Makefile b/drivers/reset/Makefile index
> > 31f9904d13f9..30d0fb4ac965 100644
> > --- a/drivers/reset/Makefile
> > +++ b/drivers/reset/Makefile
> > @@ -31,6 +31,7 @@ obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
> >  obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
> >  obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
> >  obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
> > +obj-$(CONFIG_RESET_RZV2H_USB2PHY) += reset-rzv2h-usb2phy.o
> >  obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
> >  obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
> >  obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o diff --git
> > a/drivers/reset/reset-rzv2h-usb2phy.c
> > b/drivers/reset/reset-rzv2h-usb2phy.c
> > new file mode 100644
> > index 000000000000..737b768829c9
> > --- /dev/null
> > +++ b/drivers/reset/reset-rzv2h-usb2phy.c
> > @@ -0,0 +1,241 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Renesas RZ/V2H(P) USB2PHY Port reset control driver
> > + *
> > + * Copyright (C) 2025 Renesas Electronics Corporation  */
> > +
> > +#include <linux/cleanup.h>
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/reset.h>
> > +#include <linux/reset-controller.h>
> 
> > +
> > +	priv->data = data;
> > +	priv->dev = dev;
> > +	priv->base = devm_platform_ioremap_resource(pdev, 0);
> > +	if (IS_ERR(priv->base))
> > +		return PTR_ERR(priv->base);
> > +
> > +	rstc = devm_reset_control_get_shared_deasserted(dev, NULL);
> > +	if (IS_ERR(rstc))
> > +		return dev_err_probe(dev, PTR_ERR(rstc),
> > +				     "failed to get deasserted reset\n");
> > +
> > +	spin_lock_init(&priv->lock);
> > +	dev_set_drvdata(dev, priv);

Also looks it is unused.

Cheers,
Biju