From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Hi All, This patch series adds support for the USB2PHY Port Reset control driver for the Renesas RZ/V2H(P) SoC. The changes include documenting the USB2PHY Port Reset control bindings and adding the driver. v2->v3 - Dropped Acks from Conor and Fabrizio, due to below changes - Renamed binding renesas,rzv2h-usb2phy-ctrl.yaml to renesas,rzv2h-usb2phy-reset.yaml - Renamed node name in example to reset-controller - Renamed function names in reset-rzv2h-usb2phy.c - Kept the reset line in asserted state during probe - Added comment for rzv2h_init_vals[] - Added entry in MAINTAINERS file v1->v2 - Dropped binding postfix in subject line for patch 1/2 - Moved acquiring the ctrl2 pin in deassert callback - Updated ctrl_status_bits Cheers, Prabhakar Lad Prabhakar (3): dt-bindings: reset: Document RZ/V2H(P) USB2PHY reset driver reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P) MAINTAINERS: Add entry for Renesas RZ/V2H(P) USB2PHY Port Reset driver .../reset/renesas,rzv2h-usb2phy-reset.yaml | 56 ++++ MAINTAINERS | 8 + drivers/reset/Kconfig | 7 + drivers/reset/Makefile | 1 + drivers/reset/reset-rzv2h-usb2phy.c | 241 ++++++++++++++++++ 5 files changed, 313 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/renesas,rzv2h-usb2phy-reset.yaml create mode 100644 drivers/reset/reset-rzv2h-usb2phy.c -- 2.49.0
