Add DT overlay to bind RPi Display 2, both 5" and 7" variant, on
Retronix R-Car V4H Sparrow Hawk board. All of display output, the
touch controller, and backlight control have been tested.
Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
---
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Magnus Damm <magnus.damm@xxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
---
V2: Build also the plain DTBO for each DTO. Each new DTO entry in the
Makefile has three lines, the DTBO, combined and DTB targets. This
is easy to miss, so note this down for myself.
---
arch/arm64/boot/dts/renesas/Makefile | 6 ++
...a779g3-sparrow-hawk-rpi-display-2-5in.dtso | 13 +++
...a779g3-sparrow-hawk-rpi-display-2-7in.dtso | 13 +++
.../r8a779g3-sparrow-hawk-rpi-display-2.dtsi | 90 +++++++++++++++++++
4 files changed, 122 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso
create mode 100644 arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso
create mode 100644 arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index d8c9237624664..bef624636d58b 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -99,6 +99,12 @@ dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk.dtb
dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtbo
r8a779g3-sparrow-hawk-fan-pwm-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-pwm.dtbo
dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-5in.dtbo
+r8a779g3-sparrow-hawk-rpi-display-2-5in-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-rpi-display-2-5in.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-5in.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-7in.dtbo
+r8a779g3-sparrow-hawk-rpi-display-2-7in-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-rpi-display-2-7in.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-7in.dtb
dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single.dtb
r8a779g3-white-hawk-single-ard-audio-da7212-dtbs := r8a779g3-white-hawk-single.dtb white-hawk-ard-audio-da7212.dtbo
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso
new file mode 100644
index 0000000000000..bf7b531ae9d9b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for the RPi Display 2 5" MIPI DSI panel connected
+ * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
+ */
+
+#include "r8a779g3-sparrow-hawk-rpi-display-2.dtsi"
+
+&panel {
+ compatible = "raspberrypi,dsi-5inch", "ilitek,ili9881c";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso
new file mode 100644
index 0000000000000..6ec47f213c0ff
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for the RPi Display 2 7" MIPI DSI panel connected
+ * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
+ */
+
+#include "r8a779g3-sparrow-hawk-rpi-display-2.dtsi"
+
+&panel {
+ compatible = "raspberrypi,dsi-7inch", "ilitek,ili9881c";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi
new file mode 100644
index 0000000000000..733333b85a9d2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for the RPi Display 2 MIPI DSI panel connected
+ * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board
+ *
+ * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ display_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&mcu 0 255 0>;
+ };
+
+ reg_display: regulator-display {
+ compatible = "regulator-fixed";
+ regulator-name = "rpi-display";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_dsi_touch: regulator-dsi-touch {
+ compatible = "regulator-fixed";
+ gpio = <&mcu 1 GPIO_ACTIVE_HIGH>;
+ regulator-name = "rpi-touch";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <50000>;
+ enable-active-high;
+ };
+};
+
+&i2c0_mux3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mcu: gpio@45 {
+ compatible = "raspberrypi,touchscreen-panel-regulator-v2";
+ reg = <0x45>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #pwm-cells = <3>;
+ };
+
+ touchscreen@5d {
+ compatible = "goodix,gt911";
+ reg = <0x5d>;
+ AVDD28-supply = <®_dsi_touch>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+ };
+};
+
+&dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dsi0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
+ panel: panel@0 {
+ reg = <0>;
+ backlight = <&display_bl>;
+ power-supply = <®_display>;
+ reset-gpios = <&mcu 0 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+};
--
2.50.1
