Re: [PATCH v2] PCI: endpoint: pci-epf-test: Limit PCIe BAR size for fixed BARs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 05, 2025 at 02:12:43PM +0200, Marek Vasut wrote:
> Currently, the test allocates BAR sizes according to fixed table
> bar_size[] = { 512, 512, 1024, 16384, 131072, 1048576 } . This
> does not work with controllers which have fixed size BARs, like
> Renesas R-Car V4H PCIe controller, which has BAR4 size limited
> to 256 Bytes, which is much less than 131072 currently requested
> by this test.

Perhaps rephase this to more clearly state that:
This does not work with controllers with have fixed size BARs that is
smaller than the requested BAR size.

(Since a lot of controllers drivers in-tree have fixed size BARs,
and they do work perfectly fine, but it is only because their fixed
size is larger than the size requested by pci-epf-test.c)


> 
> Adjust the test such, that in case a fixed size BAR is detected
> on a controller, minimum of requested size and fixed size BAR
> size is used during the test instead.

This sentence needs to be updated, since you no longer take the minimum
of requested size and fixed size BAR.

Perhaps simply:
"Adjust the test such that in case a fixed size BAR is detected,
the fixed BAR size is used, as that is the only possibly option."


With that:
Reviewed-by: Niklas Cassel <cassel@xxxxxxxxxx>


> ---
>  drivers/pci/endpoint/functions/pci-epf-test.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> index e091193bd8a8a..2418add64104a 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> @@ -1050,7 +1050,12 @@ static int pci_epf_test_alloc_space(struct pci_epf *epf)
>  		if (bar == test_reg_bar)
>  			continue;
>  
> -		base = pci_epf_alloc_space(epf, bar_size[bar], bar,
> +		if (epc_features->bar[bar].type == BAR_FIXED)
> +			test_reg_size = epc_features->bar[bar].fixed_size;
> +		else
> +			test_reg_size = bar_size[bar];
> +
> +		base = pci_epf_alloc_space(epf, test_reg_size, bar,
>  					   epc_features, PRIMARY_INTERFACE);
>  		if (!base)
>  			dev_err(dev, "Failed to allocate space for BAR%d\n",
> -- 
> 2.50.1
> 




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux