Hi Rob, Thanks for the feedback. > -----Original Message----- > From: Rob Herring <robh@xxxxxxxxxx> > Sent: 22 August 2025 17:21 > Subject: Re: [PATCH 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST > > On Wed, Aug 20, 2025 at 06:17:53PM +0100, Biju wrote: > > From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > > > Document the Renesas RZ/G3E USB3.2 Gen2 Host Controller (a.k.a USB3HOST). > > The USB3HOST is compliant with the Universal Serial Bus 3.2 > > Specification Revision 1.0. > > - Supports 1 downstream USB receptacles > > - Number of SSP Gen2 or SS ports: 1 > > - Number of HS or FS or LS ports: 1 > > - Supports Super Speed Plus Gen2x1 (10 Gbps), Super Speed (5 Gbps), > > High Speed (480 Mbps), Full Speed (12Mbps), and Low Speed (1.5 Mbps). > > - Supports all transfer-types: Control, Bulk, Interrupt, Isochronous, and > > these split-transactions. > > - Supports Power Control and Over Current Detection. > > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > --- > > .../bindings/usb/renesas,rzg3e-xhci.yaml | 84 +++++++++++++++++++ > > 1 file changed, 84 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml > > b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml > > new file mode 100644 > > index 000000000000..2f73ea2e1e78 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml > > @@ -0,0 +1,84 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/usb/renesas,rzg3e-xhci.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Renesas RZ/G3E USB 3.2 Gen2 Host controller > > + > > +maintainers: > > + - Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > + > > Common USB and XHCI properties don't apply? OK, will add allOf: - $ref: usb-xhci.yaml Cheers, Biju
