[PATCH v2 06/11] dt-bindings: usb: Document Renesas RZ/G3E USB3HOST

[Biju <biju.das.au@xxxxxxxxx>]

From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Document the Renesas RZ/G3E USB3.2 Gen2 Host Controller (a.k.a USB3HOST).
The USB3HOST is compliant with the Universal Serial Bus 3.2 Specification
Revision 1.0.
 - Supports 1 downstream USB receptacles
     - Number of SSP Gen2 or SS ports: 1
     - Number of HS or FS or LS ports: 1
 - Supports Super Speed Plus Gen2x1 (10 Gbps), Super Speed (5 Gbps),
   High Speed (480 Mbps), Full Speed (12Mbps), and Low Speed (1.5 Mbps).
 - Supports all transfer-types: Control, Bulk, Interrupt, Isochronous, and
   these split-transactions.
 - Supports Power Control and Over Current Detection.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
v1->v2:
 * Added ref to usb-xhci.yaml
 * Dropped Rb tag
---
 .../bindings/usb/renesas,rzg3e-xhci.yaml      | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml

diff --git a/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml
new file mode 100644
index 000000000000..98260f9fb442
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/renesas,rzg3e-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G3E USB 3.2 Gen2 Host controller
+
+maintainers:
+  - Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
+
+properties:
+  compatible:
+    const: renesas,r9a09g047-xhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Logical OR of all interrupt signals.
+      - description: System management interrupt
+      - description: Host system error interrupt
+      - description: Power management event interrupt
+      - description: xHC interrupt
+
+  interrupt-names:
+    items:
+      - const: all
+      - const: smi
+      - const: hse
+      - const: pme
+      - const: xhc
+
+  clocks:
+    maxItems: 1
+
+  phys:
+    maxItems: 2
+
+  phy-names:
+    items:
+      - const: usb2-phy
+      - const: usb3-phy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+  - phys
+  - phy-names
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g047-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@15850000 {
+      compatible = "renesas,r9a09g047-xhci";
+      reg = <0x15850000 0x10000>;
+      interrupts = <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "all", "smi", "hse", "pme", "xhc";
+      clocks = <&cpg CPG_MOD 0xaf>;
+      power-domains = <&cpg>;
+      resets = <&cpg 0xaa>;
+      phys = <&usb3_phy>, <&usb3_phy>;
+      phy-names = "usb2-phy", "usb3-phy";
+    };
-- 
2.43.0