Re: [PATCH v8 5/6] drm: renesas: rz-du: mipi_dsi: Add LPCLK clock support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/09/2025 19:17, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> Add LPCLK clock handling to the RZ/G2L MIPI DSI driver to support proper
> DSI timing parameter configuration on RZ/V2H SoCs. While lpclk is present
> on both RZ/G2L and RZ/V2H SoCs, the RZ/V2H SoC specifically uses the lpclk
> rate to configure the DSI timing parameter ULPSEXIT.
> 
> Introduce a new lpclk field in the rzg2l_mipi_dsi structure and acquire
> the "lpclk" clock during probe to enable lpclk rate-based timing
> calculations on RZ/V2H while maintaining compatibility with RZ/G2L.
> 
> Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> v7->v8:
> - Updated commit message
> - Switched to use devm_clk_get() instead of devm_clk_get_optional()
>   as lpclk clock is available on all SoCs.
> 
> v6->v7:
> - New patch
> Note, this patch was previously part of series [0].
> [0] https://lore.kernel.org/all/20250609225630.502888-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/
> ---
>  drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> index 3b52dfc0ea1e..bb03b49b1e85 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> @@ -68,6 +68,7 @@ struct rzg2l_mipi_dsi {
>  	struct drm_bridge *next_bridge;
>  
>  	struct clk *vclk;
> +	struct clk *lpclk;
>  
>  	enum mipi_dsi_pixel_format format;
>  	unsigned int num_data_lanes;
> @@ -979,6 +980,10 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
>  	if (IS_ERR(dsi->vclk))
>  		return PTR_ERR(dsi->vclk);
>  
> +	dsi->lpclk = devm_clk_get(dsi->dev, "lpclk");
> +	if (IS_ERR(dsi->lpclk))
> +		return PTR_ERR(dsi->lpclk);
> +
>  	dsi->rstc = devm_reset_control_get_optional_exclusive(dsi->dev, "rst");
>  	if (IS_ERR(dsi->rstc))
>  		return dev_err_probe(dsi->dev, PTR_ERR(dsi->rstc),

Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx>

 Tomi





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux