From: Brian Masney <bmasney@xxxxxxxxxx>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Note that the changes involving LPC32XX_DEFINE_PLL_OPS were done
by hand.
Signed-off-by: Brian Masney <bmasney@xxxxxxxxxx>
---
drivers/clk/nxp/clk-lpc32xx.c | 59 ++++++++++++++++++++++++-------------------
1 file changed, 33 insertions(+), 26 deletions(-)
diff --git a/drivers/clk/nxp/clk-lpc32xx.c b/drivers/clk/nxp/clk-lpc32xx.c
index e00f270bc6aa813b395d9fddb15c6bcb2ded0936..9df8183cf24972fda3aea30166c628880af7f474 100644
--- a/drivers/clk/nxp/clk-lpc32xx.c
+++ b/drivers/clk/nxp/clk-lpc32xx.c
@@ -579,17 +579,17 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
return regmap_update_bits(clk_regmap, clk->reg, 0x1FFFF, val);
}
-static long clk_hclk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
+static int clk_hclk_pll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct lpc32xx_pll_clk *clk = to_lpc32xx_pll_clk(hw);
- u64 m_i, o = rate, i = *parent_rate, d = (u64)rate << 6;
+ u64 m_i, o = req->rate, i = req->best_parent_rate, d = (u64) req->rate << 6;
u64 m = 0, n = 0, p = 0;
int p_i, n_i;
- pr_debug("%s: %lu/%lu\n", clk_hw_get_name(hw), *parent_rate, rate);
+ pr_debug("%s: %lu/%lu\n", clk_hw_get_name(hw), req->best_parent_rate, req->rate);
- if (rate > 266500000)
+ if (req->rate > 266500000)
return -EINVAL;
/* Have to check all 20 possibilities to find the minimal M */
@@ -614,9 +614,9 @@ static long clk_hclk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
}
}
- if (d == (u64)rate << 6) {
+ if (d == (u64) req->rate << 6) {
pr_err("%s: %lu: no valid PLL parameters are found\n",
- clk_hw_get_name(hw), rate);
+ clk_hw_get_name(hw), req->rate);
return -EINVAL;
}
@@ -634,22 +634,25 @@ static long clk_hclk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
if (!d)
pr_debug("%s: %lu: found exact match: %llu/%llu/%llu\n",
- clk_hw_get_name(hw), rate, m, n, p);
+ clk_hw_get_name(hw), req->rate, m, n, p);
else
pr_debug("%s: %lu: found closest: %llu/%llu/%llu - %llu\n",
- clk_hw_get_name(hw), rate, m, n, p, o);
+ clk_hw_get_name(hw), req->rate, m, n, p, o);
- return o;
+ req->rate = o;
+
+ return 0;
}
-static long clk_usb_pll_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
+static int clk_usb_pll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct lpc32xx_pll_clk *clk = to_lpc32xx_pll_clk(hw);
struct clk_hw *usb_div_hw, *osc_hw;
u64 d_i, n_i, m, o;
- pr_debug("%s: %lu/%lu\n", clk_hw_get_name(hw), *parent_rate, rate);
+ pr_debug("%s: %lu/%lu\n", clk_hw_get_name(hw), req->best_parent_rate,
+ req->rate);
/*
* The only supported USB clock is 48MHz, with PLL internal constraints
@@ -657,7 +660,7 @@ static long clk_usb_pll_round_rate(struct clk_hw *hw, unsigned long rate,
* and post-divider must be 4, this slightly simplifies calculation of
* USB divider, USB PLL N and M parameters.
*/
- if (rate != 48000000)
+ if (req->rate != 48000000)
return -EINVAL;
/* USB divider clock */
@@ -685,30 +688,30 @@ static long clk_usb_pll_round_rate(struct clk_hw *hw, unsigned long rate,
clk->m_div = m;
clk->p_div = 2;
clk->mode = PLL_NON_INTEGER;
- *parent_rate = div64_u64(o, d_i);
+ req->best_parent_rate = div64_u64(o, d_i);
- return rate;
+ return 0;
}
}
return -EINVAL;
}
-#define LPC32XX_DEFINE_PLL_OPS(_name, _rc, _sr, _rr) \
+#define LPC32XX_DEFINE_PLL_OPS(_name, _rc, _sr, _dr) \
static const struct clk_ops clk_ ##_name ## _ops = { \
.enable = clk_pll_enable, \
.disable = clk_pll_disable, \
.is_enabled = clk_pll_is_enabled, \
.recalc_rate = _rc, \
.set_rate = _sr, \
- .round_rate = _rr, \
+ .determine_rate = _dr, \
}
LPC32XX_DEFINE_PLL_OPS(pll_397x, clk_pll_397x_recalc_rate, NULL, NULL);
LPC32XX_DEFINE_PLL_OPS(hclk_pll, clk_pll_recalc_rate,
- clk_pll_set_rate, clk_hclk_pll_round_rate);
+ clk_pll_set_rate, clk_hclk_pll_determine_rate);
LPC32XX_DEFINE_PLL_OPS(usb_pll, clk_pll_recalc_rate,
- clk_pll_set_rate, clk_usb_pll_round_rate);
+ clk_pll_set_rate, clk_usb_pll_determine_rate);
static int clk_ddram_is_enabled(struct clk_hw *hw)
{
@@ -955,8 +958,8 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
divider->flags, divider->width);
}
-static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
+static int clk_divider_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct lpc32xx_clk_div *divider = to_lpc32xx_div(hw);
unsigned int bestdiv;
@@ -968,11 +971,15 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
bestdiv &= div_mask(divider->width);
bestdiv = _get_div(divider->table, bestdiv, divider->flags,
divider->width);
- return DIV_ROUND_UP(*prate, bestdiv);
+ req->rate = DIV_ROUND_UP(req->best_parent_rate, bestdiv);
+
+ return 0;
}
- return divider_round_rate(hw, rate, prate, divider->table,
- divider->width, divider->flags);
+ req->rate = divider_round_rate(hw, req->rate, &req->best_parent_rate,
+ divider->table, divider->width, divider->flags);
+
+ return 0;
}
static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -991,7 +998,7 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
static const struct clk_ops lpc32xx_clk_divider_ops = {
.recalc_rate = clk_divider_recalc_rate,
- .round_rate = clk_divider_round_rate,
+ .determine_rate = clk_divider_determine_rate,
.set_rate = clk_divider_set_rate,
};
--
2.50.1
