[PATCH 040/114] clk: scpi: convert from round_rate() to determine_rate()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Brian Masney <bmasney@xxxxxxxxxx>

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmasney@xxxxxxxxxx>
---
 drivers/clk/clk-scpi.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk-scpi.c b/drivers/clk/clk-scpi.c
index 19d530d52e647be3337225aa7c662d8ecee9ce0f..0b592de7bdb2a07d58a867e4ab00d493927b0b53 100644
--- a/drivers/clk/clk-scpi.c
+++ b/drivers/clk/clk-scpi.c
@@ -32,8 +32,8 @@ static unsigned long scpi_clk_recalc_rate(struct clk_hw *hw,
 	return clk->scpi_ops->clk_get_val(clk->id);
 }
 
-static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long *parent_rate)
+static int scpi_clk_determine_rate(struct clk_hw *hw,
+				   struct clk_rate_request *req)
 {
 	/*
 	 * We can't figure out what rate it will be, so just return the
@@ -41,7 +41,7 @@ static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 	 * after the rate is set and we'll know what rate the clock is
 	 * running at then.
 	 */
-	return rate;
+	return 0;
 }
 
 static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -54,7 +54,7 @@ static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 
 static const struct clk_ops scpi_clk_ops = {
 	.recalc_rate = scpi_clk_recalc_rate,
-	.round_rate = scpi_clk_round_rate,
+	.determine_rate = scpi_clk_determine_rate,
 	.set_rate = scpi_clk_set_rate,
 };
 
@@ -92,12 +92,14 @@ static unsigned long scpi_dvfs_recalc_rate(struct clk_hw *hw,
 	return opp->freq;
 }
 
-static long scpi_dvfs_round_rate(struct clk_hw *hw, unsigned long rate,
-				 unsigned long *parent_rate)
+static int scpi_dvfs_determine_rate(struct clk_hw *hw,
+				    struct clk_rate_request *req)
 {
 	struct scpi_clk *clk = to_scpi_clk(hw);
 
-	return __scpi_dvfs_round_rate(clk, rate);
+	req->rate = __scpi_dvfs_round_rate(clk, req->rate);
+
+	return 0;
 }
 
 static int __scpi_find_dvfs_index(struct scpi_clk *clk, unsigned long rate)
@@ -124,7 +126,7 @@ static int scpi_dvfs_set_rate(struct clk_hw *hw, unsigned long rate,
 
 static const struct clk_ops scpi_dvfs_ops = {
 	.recalc_rate = scpi_dvfs_recalc_rate,
-	.round_rate = scpi_dvfs_round_rate,
+	.determine_rate = scpi_dvfs_determine_rate,
 	.set_rate = scpi_dvfs_set_rate,
 };
 

-- 
2.50.1






[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux