From: Brian Masney <bmasney@xxxxxxxxxx>
determine_rate() is expected to return an error code, or 0 on success.
clk_sam9x5_peripheral_determine_rate() has a branch that returns the
parent rate on a certain case. This is the behavior of round_rate(),
so let's go ahead and fix this by setting req->rate.
Fixes: b4c115c76184f ("clk: at91: clk-peripheral: add support for changeable parent rate")
Signed-off-by: Brian Masney <bmasney@xxxxxxxxxx>
---
drivers/clk/at91/clk-peripheral.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
index c173a44c800aa8cc6970c266995f4a60b0a38554..629f050a855aaebfd1a03ff87c2b016cd2284a5a 100644
--- a/drivers/clk/at91/clk-peripheral.c
+++ b/drivers/clk/at91/clk-peripheral.c
@@ -279,8 +279,11 @@ static int clk_sam9x5_peripheral_determine_rate(struct clk_hw *hw,
long best_diff = LONG_MIN;
u32 shift;
- if (periph->id < PERIPHERAL_ID_MIN || !periph->range.max)
- return parent_rate;
+ if (periph->id < PERIPHERAL_ID_MIN || !periph->range.max) {
+ req->rate = parent_rate;
+
+ return 0;
+ }
/* Fist step: check the available dividers. */
for (shift = 0; shift <= PERIPHERAL_MAX_SHIFT; shift++) {
--
2.50.1
