From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Calling dev_pm_domain_attach()/dev_pm_domain_detach() in bus driver
probe/remove functions can affect system behavior when the drivers attached
to the bus use devres-managed resources. Since devres actions may need to
access device registers, calling dev_pm_domain_detach() too early, i.e.,
before these actions complete, can cause failures on some systems. One such
example is Renesas RZ/G3S SoC-based platforms.
If the device clocks are managed via PM domains, invoking
dev_pm_domain_detach() in the bus driver's remove function removes the
device's clocks from the PM domain, preventing any subsequent
pm_runtime_resume*() calls from enabling those clocks.
The second argument of dev_pm_domain_attach() specifies whether the PM
domain should be powered on during attachment. Likewise, the second
argument of dev_pm_domain_detach() indicates whether the domain should be
powered off during detachment.
Upcoming commits address the issue described above (initially for the
platform bus only) by deferring the call to dev_pm_domain_detach() until
after devres_release_all() in device_unbind_cleanup(). The detach_power_off
field in struct dev_pm_info stores the detach power off info from the
second argument of dev_pm_domain_attach().
Because there are cases where the device's PM domain power-on/off behavior
must be conditional (e.g., in i2c_device_probe()), the patch introduces
PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF flags to be passed to
dev_pm_domain_attach().
Finally, dev_pm_domain_attach() and its users are updated to use the newly
introduced PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF macros.
This is a preparatory commit.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
Changes in v5:
- none; this patch is new
drivers/amba/bus.c | 4 ++--
drivers/base/auxiliary.c | 2 +-
drivers/base/platform.c | 2 +-
drivers/base/power/common.c | 6 +++---
drivers/clk/qcom/apcs-sdx55.c | 2 +-
drivers/gpu/drm/display/drm_dp_aux_bus.c | 2 +-
drivers/i2c/i2c-core-base.c | 2 +-
drivers/mmc/core/sdio_bus.c | 2 +-
drivers/rpmsg/rpmsg_core.c | 2 +-
drivers/soundwire/bus_type.c | 2 +-
drivers/spi/spi.c | 2 +-
drivers/tty/serdev/core.c | 2 +-
include/linux/pm_domain.h | 10 ++++++++--
13 files changed, 23 insertions(+), 17 deletions(-)
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 71482d639a6d..74e34a07ef72 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -138,7 +138,7 @@ static int amba_read_periphid(struct amba_device *dev)
void __iomem *tmp;
int i, ret;
- ret = dev_pm_domain_attach(&dev->dev, true);
+ ret = dev_pm_domain_attach(&dev->dev, PD_FLAG_ATTACH_POWER_ON);
if (ret) {
dev_dbg(&dev->dev, "can't get PM domain: %d\n", ret);
goto err_out;
@@ -291,7 +291,7 @@ static int amba_probe(struct device *dev)
if (ret < 0)
break;
- ret = dev_pm_domain_attach(dev, true);
+ ret = dev_pm_domain_attach(dev, PD_FLAG_ATTACH_POWER_ON);
if (ret)
break;
diff --git a/drivers/base/auxiliary.c b/drivers/base/auxiliary.c
index dba7c8e13a53..44cd3f85b659 100644
--- a/drivers/base/auxiliary.c
+++ b/drivers/base/auxiliary.c
@@ -217,7 +217,7 @@ static int auxiliary_bus_probe(struct device *dev)
struct auxiliary_device *auxdev = to_auxiliary_dev(dev);
int ret;
- ret = dev_pm_domain_attach(dev, true);
+ ret = dev_pm_domain_attach(dev, PD_FLAG_ATTACH_POWER_ON);
if (ret) {
dev_warn(dev, "Failed to attach to PM Domain : %d\n", ret);
return ret;
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 075ec1d1b73a..df1ec34fdf56 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1396,7 +1396,7 @@ static int platform_probe(struct device *_dev)
if (ret < 0)
return ret;
- ret = dev_pm_domain_attach(_dev, true);
+ ret = dev_pm_domain_attach(_dev, PD_FLAG_ATTACH_POWER_ON);
if (ret)
goto out;
diff --git a/drivers/base/power/common.c b/drivers/base/power/common.c
index 781968a128ff..fecb85fa85ac 100644
--- a/drivers/base/power/common.c
+++ b/drivers/base/power/common.c
@@ -83,7 +83,7 @@ EXPORT_SYMBOL_GPL(dev_pm_put_subsys_data);
/**
* dev_pm_domain_attach - Attach a device to its PM domain.
* @dev: Device to attach.
- * @power_on: Used to indicate whether we should power on the device.
+ * @flags: indicate whether we should power on/off the device on attach/detach
*
* The @dev may only be attached to a single PM domain. By iterating through
* the available alternatives we try to find a valid PM domain for the device.
@@ -100,14 +100,14 @@ EXPORT_SYMBOL_GPL(dev_pm_put_subsys_data);
* Returns 0 on successfully attached PM domain, or when it is found that the
* device doesn't need a PM domain, else a negative error code.
*/
-int dev_pm_domain_attach(struct device *dev, bool power_on)
+int dev_pm_domain_attach(struct device *dev, u32 flags)
{
int ret;
if (dev->pm_domain)
return 0;
- ret = acpi_dev_pm_attach(dev, power_on);
+ ret = acpi_dev_pm_attach(dev, !!(flags & PD_FLAG_ATTACH_POWER_ON));
if (!ret)
ret = genpd_dev_pm_attach(dev);
diff --git a/drivers/clk/qcom/apcs-sdx55.c b/drivers/clk/qcom/apcs-sdx55.c
index 3ba01622d8f0..90dd1f1855c2 100644
--- a/drivers/clk/qcom/apcs-sdx55.c
+++ b/drivers/clk/qcom/apcs-sdx55.c
@@ -111,7 +111,7 @@ static int qcom_apcs_sdx55_clk_probe(struct platform_device *pdev)
* driver, there seems to be no better place to do this. So do it here!
*/
cpu_dev = get_cpu_device(0);
- ret = dev_pm_domain_attach(cpu_dev, true);
+ ret = dev_pm_domain_attach(cpu_dev, PD_FLAG_ATTACH_POWER_ON);
if (ret) {
dev_err_probe(dev, ret, "can't get PM domain: %d\n", ret);
goto err;
diff --git a/drivers/gpu/drm/display/drm_dp_aux_bus.c b/drivers/gpu/drm/display/drm_dp_aux_bus.c
index 7b9afcf48836..2d279e82922f 100644
--- a/drivers/gpu/drm/display/drm_dp_aux_bus.c
+++ b/drivers/gpu/drm/display/drm_dp_aux_bus.c
@@ -58,7 +58,7 @@ static int dp_aux_ep_probe(struct device *dev)
container_of(aux_ep, struct dp_aux_ep_device_with_data, aux_ep);
int ret;
- ret = dev_pm_domain_attach(dev, true);
+ ret = dev_pm_domain_attach(dev, PD_FLAG_ATTACH_POWER_ON);
if (ret)
return dev_err_probe(dev, ret, "Failed to attach to PM Domain\n");
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 2ad2b1838f0f..38eabf1173da 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -573,7 +573,7 @@ static int i2c_device_probe(struct device *dev)
goto err_clear_wakeup_irq;
do_power_on = !i2c_acpi_waive_d0_probe(dev);
- status = dev_pm_domain_attach(&client->dev, do_power_on);
+ status = dev_pm_domain_attach(&client->dev, do_power_on ? PD_FLAG_ATTACH_POWER_ON : 0);
if (status)
goto err_clear_wakeup_irq;
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index b66b637e2d57..656601754966 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -161,7 +161,7 @@ static int sdio_bus_probe(struct device *dev)
if (!id)
return -ENODEV;
- ret = dev_pm_domain_attach(dev, false);
+ ret = dev_pm_domain_attach(dev, 0);
if (ret)
return ret;
diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
index 6ee36adcbdba..bece5e635ee9 100644
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -479,7 +479,7 @@ static int rpmsg_dev_probe(struct device *dev)
struct rpmsg_endpoint *ept = NULL;
int err;
- err = dev_pm_domain_attach(dev, true);
+ err = dev_pm_domain_attach(dev, PD_FLAG_ATTACH_POWER_ON);
if (err)
goto out;
diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c
index 75d6f16efced..bc1e653080d9 100644
--- a/drivers/soundwire/bus_type.c
+++ b/drivers/soundwire/bus_type.c
@@ -101,7 +101,7 @@ static int sdw_drv_probe(struct device *dev)
/*
* attach to power domain but don't turn on (last arg)
*/
- ret = dev_pm_domain_attach(dev, false);
+ ret = dev_pm_domain_attach(dev, 0);
if (ret)
return ret;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 1bc0fdbb1bd7..8200b47b2295 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -427,7 +427,7 @@ static int spi_probe(struct device *dev)
if (spi->irq < 0)
spi->irq = 0;
- ret = dev_pm_domain_attach(dev, true);
+ ret = dev_pm_domain_attach(dev, PD_FLAG_ATTACH_POWER_ON);
if (ret)
return ret;
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 0213381fa358..d16c207a1a9b 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -399,7 +399,7 @@ static int serdev_drv_probe(struct device *dev)
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
int ret;
- ret = dev_pm_domain_attach(dev, true);
+ ret = dev_pm_domain_attach(dev, PD_FLAG_ATTACH_POWER_ON);
if (ret)
return ret;
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 0b18160901a2..62a35a78ce9b 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -36,10 +36,16 @@
* isn't specified, the index just follows the
* index for the attached PM domain.
*
+ * PD_FLAG_ATTACH_POWER_ON: Power on the domain during attach.
+ *
+ * PD_FLAG_DETACH_POWER_OFF: Power off the domain during detach.
+ *
*/
#define PD_FLAG_NO_DEV_LINK BIT(0)
#define PD_FLAG_DEV_LINK_ON BIT(1)
#define PD_FLAG_REQUIRED_OPP BIT(2)
+#define PD_FLAG_ATTACH_POWER_ON BIT(3)
+#define PD_FLAG_DETACH_POWER_OFF BIT(4)
struct dev_pm_domain_attach_data {
const char * const *pd_names;
@@ -501,7 +507,7 @@ struct generic_pm_domain *of_genpd_remove_last(struct device_node *np)
#endif /* CONFIG_PM_GENERIC_DOMAINS_OF */
#ifdef CONFIG_PM
-int dev_pm_domain_attach(struct device *dev, bool power_on);
+int dev_pm_domain_attach(struct device *dev, u32 flags);
struct device *dev_pm_domain_attach_by_id(struct device *dev,
unsigned int index);
struct device *dev_pm_domain_attach_by_name(struct device *dev,
@@ -518,7 +524,7 @@ int dev_pm_domain_start(struct device *dev);
void dev_pm_domain_set(struct device *dev, struct dev_pm_domain *pd);
int dev_pm_domain_set_performance_state(struct device *dev, unsigned int state);
#else
-static inline int dev_pm_domain_attach(struct device *dev, bool power_on)
+static inline int dev_pm_domain_attach(struct device *dev, u32 flags)
{
return 0;
}
--
2.43.0
