Re: [PATCH 2/2] thermal: rcar_gen3: Add support for R-Car V4H default trim values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marek,

Thanks for your patch.

On 2025-06-25 11:59:59 +0200, Marek Vasut wrote:
> Add default trimming values for the four temperature sensors located
> in Renesas R-Car V4H Working Sample SoC. The trimming values are
> identical for all four THS temperature sensors.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxxxx>
> ---
> Cc: "Niklas Söderlund" <niklas.soderlund@xxxxxxxxxxxx>
> Cc: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
> Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Cc: Lukasz Luba <lukasz.luba@xxxxxxx>
> Cc: Magnus Damm <magnus.damm@xxxxxxxxx>
> Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
> Cc: linux-pm@xxxxxxxxxxxxxxx
> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
> ---
>  drivers/thermal/renesas/rcar_gen3_thermal.c | 21 ++++++++++++++++++++-
>  1 file changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/renesas/rcar_gen3_thermal.c b/drivers/thermal/renesas/rcar_gen3_thermal.c
> index a388bd3135e4..f361991e9651 100644
> --- a/drivers/thermal/renesas/rcar_gen3_thermal.c
> +++ b/drivers/thermal/renesas/rcar_gen3_thermal.c
> @@ -372,6 +372,17 @@ static const struct rcar_gen3_thermal_fuse_default_info
>  	},
>  };
>  
> +static const struct rcar_gen3_thermal_fuse_default_info
> +	rcar_gen3_thermal_fuse_default_info_v4h = {

This could fit on one line (even without the symbol rename suggested in 
1/2).

> +	.ptat = { 3274, 2164, 985 },
> +	.thcodes = { /* All four THS units share the same trimming */
> +		{ 3218, 2617, 1980 },
> +		{ 3218, 2617, 1980 },
> +		{ 3218, 2617, 1980 },
> +		{ 3218, 2617, 1980 },
> +	}
> +};
> +

I can't review the values themself, but testing on V4H the readout looks 
good! With the line length nit-pick comment above fixed,

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

>  static const struct rcar_thermal_info rcar_m3w_thermal_info = {
>  	.scale = 157,
>  	.adj_below = -41,
> @@ -396,6 +407,14 @@ static const struct rcar_thermal_info rcar_gen4_thermal_info = {
>  	.fuse_defaults = &rcar_gen3_thermal_fuse_default_info_gen3,
>  };
>  
> +static const struct rcar_thermal_info rcar_v4h_thermal_info = {
> +	.scale = 167,
> +	.adj_below = -41,
> +	.adj_above = 126,
> +	.fuses = &rcar_gen3_thermal_fuse_info_gen4,
> +	.fuse_defaults = &rcar_gen3_thermal_fuse_default_info_v4h,
> +};
> +
>  static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
>  	{
>  		.compatible = "renesas,r8a774a1-thermal",
> @@ -439,7 +458,7 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
>  	},
>  	{
>  		.compatible = "renesas,r8a779g0-thermal",
> -		.data = &rcar_gen4_thermal_info,
> +		.data = &rcar_v4h_thermal_info,
>  	},
>  	{
>  		.compatible = "renesas,r8a779h0-thermal",
> -- 
> 2.47.2
> 

-- 
Kind Regards,
Niklas Söderlund




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux