From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Enable MT25QU512ABB8E12 FLASH connected to XSPI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- .../dts/renesas/r9a09g057h44-rzv2h-evk.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts index f9a0e9aefe7a..1af03cb143ba 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts @@ -371,6 +371,18 @@ vbus { pinmux = <RZV2H_PORT_PINMUX(6, 6, 14)>; /* VBUS */ }; }; + + xspi_pins: xspi0 { + ctrl { + pins = "XSPI0_RESET0N", "XSPI0_CS0N", "XSPI0_CKP"; + output-enable; + }; + + io { + pins = "XSPI0_IO0", "XSPI0_IO1", "XSPI0_IO2", "XSPI0_IO3"; + renesas,output-impedance = <3>; + }; + }; }; &qextal_clk { @@ -425,3 +437,39 @@ &usb2_phy1 { &wdt1 { status = "okay"; }; + +&xspi { + pinctrl-0 = <&xspi_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + vcc-supply = <®_1p8v>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x00000000 0x00060000>; + }; + + partition@60000 { + label = "fip"; + reg = <0x00060000 0x1fa0000>; + }; + + partition@2000000 { + label = "user"; + reg = <0x2000000 0x2000000>; + }; + }; + }; +}; -- 2.49.0